{"title":"Blaze Insulated Grill Jackets","description":"\u003cdiv data-mnk-col-layout\u003e\u003cp\u003eA Blaze insulated jacket lines the island opening so a Blaze grill, griddle, burner or pizza oven can be built into a combustible enclosure, such as a wood-framed island. Blaze requires one whenever the island is not non-combustible. Each jacket fits one product family, so match it to your exact model.\u003c\/p\u003e\u003c\/div\u003e\n\u003cdiv class=\"mnk-col-guide\"\u003e\n\u003ch2 id=\"when-required\"\u003eWhen a Blaze insulated jacket is required\u003c\/h2\u003e\n\u003cp\u003eThe Blaze installation manuals say the grill must go into a non-combustible enclosure or be installed with a Blaze insulated jacket. If your island frame is wood or any other combustible material, the jacket is mandatory. The jacket does not change the clearances the manual sets above, behind or beside the appliance.\u003c\/p\u003e\n\u003ch2 id=\"which-jacket\"\u003eWhich jacket fits your Blaze\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAppliance\u003c\/th\u003e\n\u003cth\u003eJacket\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e25-inch 3-burner grills\u003c\/td\u003e\n\u003ctd\u003eBLZ-3-IJ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e32-inch Premium LTE and Prelude LBM\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/blaze-insulated-jacket-for-32-inch-4-burner-gas-grills-blz-4-ij\"\u003eBLZ-4-IJ\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e40-inch Premium LTE\u003c\/td\u003e\n\u003ctd\u003eBLZ-5-IJ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e32-inch and 40-inch LTE+\u003c\/td\u003e\n\u003ctd\u003eA Blaze insulated jacket is required in a combustible island; please confirm the jacket model for LTE+ grills with us before ordering\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLTE PRO 32-inch \/ 40-inch\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/blaze-insulated-jacket-for-lte-pro-32-inch-4-burner-gas-grill-blz-4-ij2\"\u003eBLZ-4-IJ2\u003c\/a\u003e \/ BLZ-5-IJ2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfessional LUX 34-inch \/ 44-inch\u003c\/td\u003e\n\u003ctd\u003eBLZ-3PRO-IJ \/ BLZ-4PRO-IJ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower burners\u003c\/td\u003e\n\u003ctd\u003eBLZ-PB-IJ (Premium LTE), BLZ-PROPB-IJ (Professional LUX, LTE PRO)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDouble side burners\u003c\/td\u003e\n\u003ctd\u003eBLZ-SB2-IJ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGriddles\u003c\/td\u003e\n\u003ctd\u003eBLZ-GRIDDLE-IJ (30-inch), BLZ-GRIDDLE-IJ2 (LTE+ 30), BLZ-GRIDDLE40-IJ (LTE PRO 40)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e26-inch pizza oven\u003c\/td\u003e\n\u003ctd\u003eBLZ-26-PZOVN-IJ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eBlaze does not name a jacket for the BCM 32 (BLZ-4BCM), so ask us before ordering.\u003c\/p\u003e\n\u003ch2 id=\"cutout\"\u003eCut the island for the jacket, not the grill\u003c\/h2\u003e\n\u003cp\u003eThe jacket is larger than the grill, so the island opening must be framed to the jacket's cutout. For example, the LTE PRO 32-inch grill needs a 30-3\/4\" W cutout on its own but 33-3\/8\" W x 21-1\/4\" D x 10\" H with the BLZ-4-IJ2. Blaze notes that a 1\/4\" to 1\/2\" gap below the jacket is possible. See \u003ca href=\"\/collections\/blaze-built-in-grills\"\u003eBlaze built-in grills\u003c\/a\u003e for grill cutouts, all \u003ca href=\"\/collections\/insulated-grill-jackets\"\u003einsulated grill jackets\u003c\/a\u003e, or \u003ca href=\"\/collections\/blaze-grills\"\u003eall Blaze products\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2 id=\"faq\"\u003eBlaze insulated jacket FAQ\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eDo I need an insulated jacket for my Blaze grill?\u003c\/summary\u003e\u003cp\u003eOnly if the island is built from combustible materials such as a wood frame. In a fully non-combustible island, the Blaze manuals do not require one. Check local codes as well.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I use one jacket for different Blaze grills?\u003c\/summary\u003e\u003cp\u003eNo. Blaze makes each jacket for one product family and size. The LTE PRO 32-inch, for example, takes the BLZ-4-IJ2, not the BLZ-4-IJ used by 32-inch Premium LTE grills.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes the jacket change the island cutout?\u003c\/summary\u003e\u003cp\u003eYes. Frame the opening to the jacket's cutout, which is wider than the grill's own cutout. Ask us for the confirmed jacket cutout before you build.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the grill included with the jacket?\u003c\/summary\u003e\u003cp\u003eNo. The jacket is sold on its own and the grill or component is sold separately.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n","products":[{"product_id":"blaze-insulated-jacket-for-25-inch-3-burner-gas-grills-blz-3-ij","title":"Blaze Insulated Jacket For 25-Inch 3-Burner Gas Grills - BLZ-3-IJ","description":"\u003ch2 id=\"description\" data-mnk-layout=\"1\"\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe Blaze BLZ-3-IJ is the stainless steel insulated jacket Blaze lists for its 25-inch 3-burner Prelude LBM built-in gas grill (\u003ca href=\"\/products\/blaze-prelude-lbm-25-inch-3-burner-built-in-grill-blz-3lbm\"\u003eBLZ-3LBM\u003c\/a\u003e). Blaze makes it for installing that grill in a combustible enclosure, such as a wood-framed outdoor kitchen or BBQ island: the jacket sits in the island opening and the grill head drops into it, shielding the surrounding structure from the grill's heat.\u003c\/p\u003e\n\u003cp\u003eThe jacket measures 27-1\/4\" W x 23-1\/8\" D x 9-5\/8\" H and needs a cut-out of 25-9\/16\" W x 22-1\/4\" D x 9-1\/8\" H. A self-supporting ledge runs around the sides and back.\u003c\/p\u003e\n\u003cp\u003eThe Prelude LBM 25 has been replaced by the \u003ca href=\"\/products\/blaze-bcm-25-inch-3-burner-built-in-gas-grill-blz-3bcm\"\u003eBlaze BCM 25-inch 3-burner grill (BLZ-3BCM)\u003c\/a\u003e. Blaze's jacket page names only the Prelude LBM for this jacket, so if you own a BCM 25, \u003ca href=\"\/pages\/contact-us\"\u003eask us\u003c\/a\u003e to confirm the fit with Blaze before you order. Other sizes use other jackets: the 34-inch Professional LUX 3-burner takes the \u003ca href=\"\/products\/blaze-insulated-jacket-for-professional-lux-3-burner-gas-grills-blz-3pro-ij\"\u003eBLZ-3PRO-IJ\u003c\/a\u003e and 32-inch Prelude LBM and Premium LTE grills take the \u003ca href=\"\/products\/blaze-insulated-jacket-for-32-inch-4-burner-gas-grills-blz-4-ij\"\u003eBLZ-4-IJ\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003ePlan before you order: the grill is sold separately, and the jacket does not change the grill's own clearances above, behind or beside it.\u003c\/p\u003e\n\u003ch2 id=\"features\"\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequired for combustible islands:\u003c\/strong\u003e Blaze says a Blaze insulated jacket must be used when the island is not built from non-combustible material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSized for one grill:\u003c\/strong\u003e made for the 25-inch 3-burner Prelude LBM; cut-out 25-9\/16\" W x 22-1\/4\" D x 9-1\/8\" H.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel construction:\u003c\/strong\u003e built for outdoor use and gives the island opening a finished stainless look.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-supporting ledge:\u003c\/strong\u003e runs around the sides and back so the jacket rests on the countertop opening.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime warranty:\u003c\/strong\u003e Blaze covers the jacket against defects in manufacturing and workmanship for the original purchaser.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"specifications\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"mnk-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eBlaze\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003eBLZ-3-IJ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eType\u003c\/th\u003e\n\u003ctd\u003eInsulated grill jacket for built-in installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits (per Blaze)\u003c\/th\u003e\n\u003ctd\u003eBlaze Prelude LBM 25-inch 3-burner built-in gas grill (BLZ-3LBM)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall width\u003c\/th\u003e\n\u003ctd\u003e27-1\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall depth\u003c\/th\u003e\n\u003ctd\u003e23-1\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall height\u003c\/th\u003e\n\u003ctd\u003e9-5\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut-out width\u003c\/th\u003e\n\u003ctd\u003e25-9\/16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut-out depth\u003c\/th\u003e\n\u003ctd\u003e22-1\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut-out height\u003c\/th\u003e\n\u003ctd\u003e9-1\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut-out note\u003c\/th\u003e\n\u003ctd\u003e1\/4\" to 1\/2\" gap possible below the jacket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eSelf-supporting ledge around the sides and back\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUse\u003c\/th\u003e\n\u003ctd\u003eRequired when the island is built from combustible materials\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003eLifetime, defects in manufacturing and workmanship (original purchaser, single-family home use)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cdiv class=\"mnk-kit\"\u003e\n\u003cdiv class=\"mnk-kit__col\"\u003e\n\u003ch3 id=\"whats-included\"\u003eWhat's included\u003c\/h3\u003e\n\u003cul class=\"mnk-included\"\u003e\n\u003cli\u003eStainless steel insulated jacket for the 3-burner Prelude LBM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBlaze publishes no packing list, hardware count or weight for this jacket. The grill is sold separately.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mnk-kit__col\"\u003e\n\u003ch3 id=\"sold-separately\"\u003eSold separately\u003c\/h3\u003e\n\u003cul class=\"mnk-optional\"\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/blaze-prelude-lbm-25-inch-3-burner-built-in-grill-blz-3lbm\"\u003eBlaze Prelude LBM 25-inch 3-burner built-in grill (BLZ-3LBM)\u003c\/a\u003e: the grill Blaze lists for this jacket.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/blaze-6-x-14-stainless-steel-island-vent-panel-blz-island-vent\"\u003eBlaze 6 x 14 stainless island vent panel (BLZ-ISLAND-VENT)\u003c\/a\u003e: a stainless cover for the island vents.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/blaze-20-inch-stainless-steel-roll-out-trash-propane-tank-drawer-blz-trlp-drw-h\"\u003eBlaze roll-out trash and propane tank drawer (BLZ-TRLP-DRW-H)\u003c\/a\u003e: the Prelude LBM guide names Blaze's propane tank drawer as an alternative to a plenum wall for a tank inside the island.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/blaze-insulated-jacket-for-professional-lux-3-burner-gas-grills-blz-3pro-ij\"\u003eBlaze insulated jacket for the Professional LUX 34-inch 3-burner grill (BLZ-3PRO-IJ)\u003c\/a\u003e: for Blaze's Professional LUX 3-burner instead.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 id=\"installation\"\u003eInstallation planning\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCut the island opening to the jacket cut-out: 25-9\/16\" W x 22-1\/4\" D x 9-1\/8\" H. Blaze notes that a 1\/4\" to 1\/2\" gap is possible below the insulated jacket, so allow for it when you build the opening.\u003c\/li\u003e\n\u003cli\u003ePrelude LBM use and care guide (BLZ-3LBM \/ BLZ-4LBM): keep 14\" from combustible construction at the sides and 16\" at the back; the 5\" needed behind the grill for the lid does not replace the back clearance. Keep at least 6 feet between the grill and any overhead construction.\u003c\/li\u003e\n\u003cli\u003eIsland venting: propane settles low, so place vents low; natural gas rises, so place vents high. A propane cylinder inside the island needs a plenum wall or Blaze's propane tank drawer. Local codes and a licensed professional set the final ventilation.\u003c\/li\u003e\n\u003cli\u003eGas: for natural gas, a flex connector of at least 1\/2\" diameter; propane uses one standard 20 lb cylinder with an overfill prevention device. All gas connections must be made by a qualified installer.\u003c\/li\u003e\n\u003cli\u003eA licensed professional contractor should install the jacket, and a licensed gas professional should make every gas connection (Blaze insulated jacket installation sheet).\u003c\/li\u003e\n\u003cli\u003eBlaze does not allow a rubber gas line connected directly to the appliance inside the jacket, even one supplied with it: use a stainless steel flex line. The appliance's fittings may not suit every installation, so different fittings or a pipe extension may be needed to avoid kinks and keep excess line out of the jacket.\u003c\/li\u003e\n\u003cli\u003eLeak-check every gas connection as the final step and correct any leak before use.\u003c\/li\u003e\n\u003cli\u003eThe jacket protects combustible material from the cooking surface down only. The appliance manual's clearances above, behind and beside the appliance still apply.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 id=\"warranty\"\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBlaze states that its insulated jackets are covered by a lifetime warranty against defects in manufacturing and workmanship. The warranty extends to the original purchaser and applies to products bought for ordinary single-family home use. Blaze's product page gives no further conditions or exclusions for the jacket; the grill you set in it carries its own warranty, set out in its manual. Register the product with Blaze after delivery.\u003c\/p\u003e\n\u003ch3 id=\"manuals\"\u003eManuals and documents\u003c\/h3\u003e\n\u003cul class=\"mnk-docs\"\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/product\/blaze-insulated-jackets-for-gas-grills\/\" target=\"_blank\" rel=\"noopener\"\u003eBlaze product page: Insulated Jackets for Gas Grills (all sizes)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/wp-content\/uploads\/Insulated-Jacket-Installation.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBlaze Insulated Jacket Installation sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/wp-content\/uploads\/BLZ-BCM-Manual.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSuccessor grill: Blaze BCM grill manual, BLZ-3BCM \/ BLZ-4BCM, 7\/16\/2025 (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/support\/register-your-product\/\" target=\"_blank\" rel=\"noopener\"\u003eBlaze product registration\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 id=\"legal\"\u003eLegal disclaimers and warnings\u003c\/h3\u003e\n\u003cp class=\"mnk-legal\"\u003eProduct packaging, owners' manuals, installation instructions, and\/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product. WARNING: This product can expose you to chemicals including chromium (hexavalent compounds), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e\n","brand":"Blaze","offers":[{"title":"Default Title","offer_id":32791630214,"sku":"BLZ-3-IJ","price":599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1251\/8981\/files\/download_1_851262b1-4bcc-471e-b4a0-8f02bf3265c1.jpg?v=1718312588"},{"product_id":"blaze-insulated-jacket-for-32-inch-4-burner-gas-grills-blz-4-ij","title":"Blaze Insulated Jacket For 32-Inch 4-Burner Gas Grills - BLZ-4-IJ","description":"\u003ch2 id=\"description\" data-mnk-layout=\"1\"\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe Blaze BLZ-4-IJ is the stainless steel insulated jacket Blaze lists for its 32-inch 4-burner Prelude LBM and Premium LTE built-in gas grills, such as the \u003ca href=\"\/products\/blaze-premium-lte-32-inch-4-burner-built-in-gas-grill-w-rear-infrared-burner-lift-assist-hood-blz-4lte3\"\u003ePremium LTE+ 32-inch grill (BLZ-4LTE3)\u003c\/a\u003e and the \u003ca href=\"\/products\/blaze-prelude-lbm-32-inch-4-burner-built-in-gas-grill-blz-4lbm\"\u003ePrelude LBM 32-inch grill (BLZ-4LBM)\u003c\/a\u003e. Blaze requires an insulated jacket whenever one of its gas grills is built into a combustible enclosure, for example a wood-framed outdoor kitchen or BBQ island. The jacket lines the grill opening and carries the grill on a self-supporting ledge around the sides and back.\u003c\/p\u003e\n\u003cp\u003eThe jacket is 9-3\/4\" high and needs an island cut-out 33\" wide, wider than the grill's own 30-5\/8\" W x 21-1\/4\" D x 8-1\/2\" H cut-out, so frame the opening for the jacket, not the grill. Blaze's published figures for the jacket's overall width and depth and for the cut-out depth and height do not agree with each other, so we have asked Blaze to confirm them. Ask us for the confirmed cut-out before you frame the island.\u003c\/p\u003e\n\u003cp\u003ePlan before you order: the grill is sold separately, and the jacket does not change the grill's clearances above, behind or beside it. Blaze makes a different jacket for each grill family: the LTE PRO 32-inch grill takes the \u003ca href=\"\/products\/blaze-insulated-jacket-for-lte-pro-32-inch-4-burner-gas-grill-blz-4-ij2\"\u003eBLZ-4-IJ2\u003c\/a\u003e, 40-inch 5-burner Premium LTE grills take the \u003ca href=\"\/products\/blaze-insulated-jacket-for-40-inch-5-burner-gas-grills-blz-5-ij\"\u003eBLZ-5-IJ\u003c\/a\u003e, and the 3-burner Prelude LBM takes the \u003ca href=\"\/products\/blaze-insulated-jacket-for-25-inch-3-burner-gas-grills-blz-3-ij\"\u003eBLZ-3-IJ\u003c\/a\u003e. Blaze does not name a jacket for the newer \u003ca href=\"\/products\/blaze-bcm-32-inch-4-burner-built-in-gas-grill-blz-4bcm\"\u003eBCM 32-inch grill (BLZ-4BCM)\u003c\/a\u003e, so BCM owners should ask us before ordering.\u003c\/p\u003e\n\u003ch2 id=\"features\"\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade for Blaze 32-inch 4-burner grills:\u003c\/strong\u003e the jacket Blaze lists for its 4-burner Prelude LBM and Premium LTE built-in grills.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequired for combustible islands:\u003c\/strong\u003e the Premium LTE+ and LTE grill manual makes a Blaze insulated jacket mandatory when the outdoor kitchen is built of combustible material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-supporting ledge:\u003c\/strong\u003e a ledge around the sides and back supports the grill in the opening.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel construction:\u003c\/strong\u003e made for outdoor kitchens and gives the opening a finished stainless look.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime warranty:\u003c\/strong\u003e Blaze covers its insulated jackets against defects in manufacturing and workmanship for the original purchaser.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"specifications\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"mnk-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eBlaze\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003eBLZ-4-IJ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eType\u003c\/th\u003e\n\u003ctd\u003eInsulated jacket for a built-in gas grill; grill not included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits (per Blaze)\u003c\/th\u003e\n\u003ctd\u003eBlaze 4-burner Prelude LBM and Premium LTE built-in gas grills; the Premium LTE+ and LTE grill manual (7\/16\/2025) gives BLZ-4LTE2 and BLZ-4LTE3 the same 32-inch cut-out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot for\u003c\/th\u003e\n\u003ctd\u003eLTE PRO 32-inch (use BLZ-4-IJ2) and Professional LUX grills (use BLZ-3PRO-IJ or BLZ-4PRO-IJ); fit on BLZ-4BCM not stated by Blaze\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall height\u003c\/th\u003e\n\u003ctd\u003e9-3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall width and depth\u003c\/th\u003e\n\u003ctd\u003eBeing confirmed with Blaze (published sources differ)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eIsland cut-out width for the jacket\u003c\/th\u003e\n\u003ctd\u003e33\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eIsland cut-out depth and height\u003c\/th\u003e\n\u003ctd\u003eBeing confirmed with Blaze (published sources differ); ask us before framing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut-out note\u003c\/th\u003e\n\u003ctd\u003eA 1\/4\" to 1\/2\" gap below the jacket is possible (Blaze)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eGrill cut-out without a jacket\u003c\/th\u003e\n\u003ctd\u003e30-5\/8\" W x 21-1\/4\" D x 8-1\/2\" H (32-inch Premium LTE+ \/ LTE, grill manual)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupport\u003c\/th\u003e\n\u003ctd\u003eSelf-supporting ledge around the sides and back\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUse\u003c\/th\u003e\n\u003ctd\u003eRequired for installation in a combustible enclosure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003eLifetime against defects in manufacturing and workmanship (original purchaser, single-family home use)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cdiv class=\"mnk-kit\"\u003e\n\u003cdiv class=\"mnk-kit__col\"\u003e\n\u003ch3 id=\"whats-included\"\u003eWhat's included\u003c\/h3\u003e\n\u003cul class=\"mnk-included\"\u003e\n\u003cli\u003eOne stainless steel insulated jacket for 32-inch 4-burner Prelude LBM and Premium LTE grills (BLZ-4-IJ)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBlaze publishes no packing list, hardware count or weight for this jacket. The grill is sold separately.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mnk-kit__col\"\u003e\n\u003ch3 id=\"sold-separately\"\u003eSold separately\u003c\/h3\u003e\n\u003cul class=\"mnk-optional\"\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/blaze-premium-lte-32-inch-4-burner-built-in-gas-grill-w-rear-infrared-burner-lift-assist-hood-blz-4lte3\"\u003ePremium LTE+ 32-inch built-in grill (BLZ-4LTE3)\u003c\/a\u003e: a grill this jacket is made for.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/blaze-premium-lte-32-inch-4-burner-built-in-natural-gas-grill-with-rear-infrared-burner-grill-lights-blz-4lte2\"\u003ePremium LTE3 Marine Grade 32-inch grill (BLZ-4LTE3MG)\u003c\/a\u003e: the marine grade version of the 32-inch Premium LTE+ grill.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/blaze-grill-cover-for-prelude-lbm-premium-lte-4-burner-gas-charcoal-built-in-grills-4bicv\"\u003eCover for Prelude LBM and Premium LTE 4-burner built-in grills (4BICV)\u003c\/a\u003e: protects the grill head in the island.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/blaze-6-x-14-stainless-steel-island-vent-panel-blz-island-vent\"\u003eStainless island vent panel (BLZ-ISLAND-VENT)\u003c\/a\u003e: a stainless cover for the island vents the grill manual requires.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 id=\"installation\"\u003eInstallation planning\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCut the island opening for the jacket, not the grill: 33\" wide, with the depth and height we confirm for you (a 1\/4\" to 1\/2\" gap below the jacket is possible). Set the jacket in, then lower the grill into it with a second person.\u003c\/li\u003e\n\u003cli\u003eA licensed professional contractor should install the jacket, and a licensed gas professional should make every gas connection. Blaze prohibits a rubber gas line connected directly to the appliance inside the jacket, even one supplied with it: use a stainless steel flex line. Different fittings or a gas pipe extension may be needed so the line does not kink and no excess line is left inside the jacket.\u003c\/li\u003e\n\u003cli\u003eThe jacket protects the combustible structure below the cooking surface only. The appliance's own clearances above, behind and beside it still apply (see its manual).\u003c\/li\u003e\n\u003cli\u003eLeak-test every gas connection as the final step and correct any leak before use.\u003c\/li\u003e\n\u003cli\u003eGrill clearances (Premium LTE+ and LTE grill manual, 7\/16\/2025): 18\" from combustible construction at the sides and back, 4\" from non-combustible construction; never under combustible overhead construction; under a non-combustible overhead, 72\" with a vent hood. Cut a 1\" air gap in the front face of the countertop below the control panel. Prelude LBM owners should follow the clearances in the LBM use and care guide.\u003c\/li\u003e\n\u003cli\u003eIsland vents on both sides: propane is heavier than air and needs lower vents within 1\" of the island floor; natural gas rises and needs upper vents within 5\" of the island top, with at least 1 sq. in. of free area per lb of stored fuel per vent.\u003c\/li\u003e\n\u003cli\u003eGas: the manual recommends a flex connector of at least 5\/8\" diameter and requires an installer-supplied shut-off valve in an accessible place. Maximum inlet pressure is 14\" w.c. for natural gas and propane.\u003c\/li\u003e\n\u003cli\u003eElectrical: the grill's lights need a 15-amp breaker with GFI protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 id=\"warranty\"\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBlaze states that its insulated jackets are covered by a lifetime warranty against defects in manufacturing and workmanship. The warranty extends to the original purchaser and applies to products bought for ordinary single-family home use. Blaze's product page gives no further conditions or exclusions for the jacket; the grill you set in it carries its own warranty, set out in its manual. Register the product with Blaze after delivery.\u003c\/p\u003e\n\u003ch3 id=\"manuals\"\u003eManuals and documents\u003c\/h3\u003e\n\u003cul class=\"mnk-docs\"\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/product\/blaze-insulated-jackets-for-gas-grills\/\" target=\"_blank\" rel=\"noopener\"\u003eBlaze product page: Insulated Jackets for Gas Grills (all sizes)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/wp-content\/uploads\/Insulated-Jacket-Installation.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBlaze insulated jacket installation (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/wp-content\/uploads\/BLZ-5LTE3-4LTE3-manual.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBlaze Premium LTE+ and LTE grill manual, version 7\/16\/2025 (covers BLZ-4LTE2, 4LTE3, 5LTE2, 5LTE3) (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/support\/register-your-product\/\" target=\"_blank\" rel=\"noopener\"\u003eBlaze product registration\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 id=\"legal\"\u003eLegal disclaimers and warnings\u003c\/h3\u003e\n\u003cp class=\"mnk-legal\"\u003eProduct packaging, owners' manuals, installation instructions, and\/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product. WARNING: This product can expose you to chemicals including chromium (hexavalent compounds), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e\n","brand":"Blaze","offers":[{"title":"Default Title","offer_id":32791630790,"sku":"BLZ-4-IJ","price":649.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1251\/8981\/files\/download_3_e3b0bb65-a2ff-4551-b717-cd42a5100125.jpg?v=1718312582"},{"product_id":"blaze-insulated-jacket-for-40-inch-5-burner-gas-grills-blz-5-ij","title":"Blaze Insulated Jacket For 40-Inch 5-Burner Gas Grills - BLZ-5-IJ","description":"\u003ch2 id=\"description\" data-mnk-layout=\"1\"\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe Blaze BLZ-5-IJ is the stainless steel insulated jacket for Blaze's 40-inch 5-burner Premium LTE built-in gas grills, such as the \u003ca href=\"\/products\/blaze-premium-lte-40-inch-5-burner-built-in-gas-grill-w-rear-infrared-burner-lift-assist-hood-blz-5lte3\"\u003ePremium LTE+ 40-inch grill (BLZ-5LTE3)\u003c\/a\u003e and the \u003ca href=\"\/products\/blaze-premium-lte-40-inch-5-burner-built-in-grill-blz-5lte2\"\u003ePremium LTE 40-inch grill (BLZ-5LTE2)\u003c\/a\u003e. Blaze requires an insulated jacket whenever one of its gas grills is built into a combustible enclosure, for example a wood-framed outdoor kitchen or BBQ island. The jacket lines the grill opening and carries the grill on a self-supporting ledge around the sides and back.\u003c\/p\u003e\n\u003cp\u003eThe jacket measures 42-3\/8\" W x 23-1\/8\" D x 9-3\/4\" H and needs an island cut-out of 40-3\/4\" W x 21-3\/4\" D x 9-3\/4\" H. That is larger than the grill's own cut-out (38-3\/8\" W x 21-1\/4\" D x 8-1\/2\" H), so size the opening for the jacket when you plan a combustible island.\u003c\/p\u003e\n\u003cp\u003ePlan before you order: the grill is sold separately, and the jacket does not change the grill's clearances above, behind or beside it. Blaze makes a different jacket for each grill family: the LTE PRO 40-inch grill takes the \u003ca href=\"\/products\/blaze-insulated-jacket-for-lte-pro-40-inch-5-burner-gas-grill-blz-5-ij2\"\u003eBLZ-5-IJ2\u003c\/a\u003e, the Professional LUX 4-burner takes the \u003ca href=\"\/products\/blaze-insulated-jacket-for-professional-lux-4-burner-gas-grills-blz-4pro-ij\"\u003eBLZ-4PRO-IJ\u003c\/a\u003e, and 32-inch Prelude LBM and Premium LTE grills take the \u003ca href=\"\/products\/blaze-insulated-jacket-for-32-inch-4-burner-gas-grills-blz-4-ij\"\u003eBLZ-4-IJ\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2 id=\"features\"\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade for Blaze 40-inch 5-burner Premium LTE grills:\u003c\/strong\u003e the jacket Blaze lists for its 5-burner Premium LTE built-in grills.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequired for combustible islands:\u003c\/strong\u003e Blaze's grill manual makes a Blaze insulated jacket mandatory when the island or outdoor kitchen is built of combustible material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-supporting ledge:\u003c\/strong\u003e a ledge around the sides and back supports the grill in the opening.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel construction:\u003c\/strong\u003e made for outdoor kitchens and backed by Blaze's lifetime warranty against manufacturing defects.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePublished cut-out:\u003c\/strong\u003e 40-3\/4\" W x 21-3\/4\" D x 9-3\/4\" H, so the island builder can frame the opening before the jacket arrives.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"specifications\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"mnk-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eBlaze\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003eBLZ-5-IJ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eType\u003c\/th\u003e\n\u003ctd\u003eInsulated jacket for a built-in gas grill; grill not included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits (per Blaze)\u003c\/th\u003e\n\u003ctd\u003eBlaze 5-burner Premium LTE built-in gas grills; the Premium LTE+ and LTE grill manual gives BLZ-5LTE2 and BLZ-5LTE3 the same 40-inch grill cut-out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot for\u003c\/th\u003e\n\u003ctd\u003eLTE PRO 40-inch (use BLZ-5-IJ2) and Professional LUX grills (use BLZ-3PRO-IJ or BLZ-4PRO-IJ)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall size\u003c\/th\u003e\n\u003ctd\u003e42-3\/8\" W x 23-1\/8\" D x 9-3\/4\" H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eIsland cut-out for the jacket\u003c\/th\u003e\n\u003ctd\u003e40-3\/4\" W x 21-3\/4\" D x 9-3\/4\" H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut-out note\u003c\/th\u003e\n\u003ctd\u003eA 1\/4\" to 1\/2\" gap below the jacket is possible (Blaze)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eGrill cut-out without a jacket\u003c\/th\u003e\n\u003ctd\u003e38-3\/8\" W x 21-1\/4\" D x 8-1\/2\" H (BLZ-5LTE2 \/ BLZ-5LTE3 manual)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupport\u003c\/th\u003e\n\u003ctd\u003eSelf-supporting ledge around the sides and back\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUse\u003c\/th\u003e\n\u003ctd\u003eRequired for installation in a combustible enclosure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003eLifetime against manufacturing defects (original purchaser, single-family home use)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cdiv class=\"mnk-kit\"\u003e\n\u003cdiv class=\"mnk-kit__col\"\u003e\n\u003ch3 id=\"whats-included\"\u003eWhat's included\u003c\/h3\u003e\n\u003cul class=\"mnk-included\"\u003e\n\u003cli\u003eOne stainless steel insulated jacket for 40-inch 5-burner Premium LTE grills (BLZ-5-IJ)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mnk-kit__col\"\u003e\n\u003ch3 id=\"sold-separately\"\u003eSold separately\u003c\/h3\u003e\n\u003cul class=\"mnk-optional\"\u003e\n\u003cli\u003e\u003ca href=\"\/products\/blaze-premium-lte-40-inch-5-burner-built-in-gas-grill-w-rear-infrared-burner-lift-assist-hood-blz-5lte3\"\u003ePremium LTE+ 40-inch grill (BLZ-5LTE3)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/blaze-premium-lte-40-inch-5-burner-built-in-grill-blz-5lte2\"\u003ePremium LTE 40-inch grill (BLZ-5LTE2)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/blaze-grill-cover-for-premium-lte-5-burner-built-in-gas-grills-5bicv\"\u003eCover for 40-inch 5-burner built-in grills (5BICV)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/blaze-6-x-14-stainless-steel-island-vent-panel-blz-island-vent\"\u003eStainless island vent panel (BLZ-ISLAND-VENT)\u003c\/a\u003e, for island venting\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/blaze-rotisserie-kit-for-40-inch-5-burner-gas-grills-blz-5-rotis-ss\"\u003e40-inch rotisserie kit (BLZ-5-ROTIS-SS)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 id=\"installation\"\u003eInstallation planning\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCut the island opening for the jacket: 40-3\/4\" W x 21-3\/4\" D x 9-3\/4\" H (a 1\/4\" to 1\/2\" gap below the jacket is possible). Set the jacket in, then lower the grill into it with a second person.\u003c\/li\u003e\n\u003cli\u003eA licensed professional contractor should install the jacket, and a licensed gas professional should make every gas connection. Blaze prohibits a rubber gas line connected directly to the appliance inside the jacket, even one supplied with it: use a stainless steel flex line. Different fittings or a gas pipe extension may be needed so the line does not kink and no excess line is left inside the jacket.\u003c\/li\u003e\n\u003cli\u003eThe jacket protects the combustible structure below the cooking surface only. The appliance's own clearances above, behind and beside it still apply (see its manual).\u003c\/li\u003e\n\u003cli\u003eLeak-test every gas connection as the final step and correct any leak before use.\u003c\/li\u003e\n\u003cli\u003eGrill clearances (Premium LTE+ and LTE grill manual, 7\/16\/2025): 18\" from combustible construction at the sides and back; never under combustible overhead construction; under a non-combustible overhead, 72\" with a UL-approved vent hood of at least 1,000 CFM, larger than the cooking area. Cut a 1\" air gap in the front face of the countertop below the control panel.\u003c\/li\u003e\n\u003cli\u003eIsland vents on both sides: propane needs lower vents (bottom within 1\" of the island floor, top no more than 5\" up, at least 1\/2 sq. in. of free area per lb of stored fuel each); natural gas needs upper vents within 5\" of the island top (at least 1 sq. in. per lb each). Openings must admit a 1\/8\" rod and stay clear.\u003c\/li\u003e\n\u003cli\u003eThe grill's lights need a 15-amp outlet on a GFI-protected breaker inside the island (back wall). A permit may be required for outdoor kitchen construction.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 id=\"warranty\"\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBlaze lifetime warranty against defects in manufacturing and workmanship, to the original purchaser, for products in ordinary single-family home use. The appliance you set in the jacket has its own warranty, shown on that product's page and in its manual; Blaze voids the appliance warranty when it is not installed by a qualified installer. Ask us and we will send the current Blaze warranty document before you order.\u003c\/p\u003e\n\n\u003ch3 id=\"manuals\"\u003eManuals and documents\u003c\/h3\u003e\n\u003cul class=\"mnk-docs\"\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/wp-content\/uploads\/Insulated-Jacket-Installation.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBlaze insulated jacket installation (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/wp-content\/uploads\/BLZ-5LTE3-4LTE3-manual.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBlaze Premium LTE+ and LTE grill manual, version 7\/16\/2025 (covers BLZ-4LTE2, 4LTE3, 5LTE2, 5LTE3) (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/product\/blaze-insulated-jackets-for-gas-grills\/\" target=\"_blank\" rel=\"noopener\"\u003eBlaze product page: Insulated Jackets for Gas Grills\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 id=\"legal\"\u003eLegal disclaimers and warnings\u003c\/h3\u003e\n\u003cp class=\"mnk-legal\"\u003eProduct packaging, owners' manuals, installation instructions, and\/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product. WARNING: This product can expose you to chemicals including chromium (hexavalent compounds), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e\n","brand":"Blaze","offers":[{"title":"Default Title","offer_id":32791631174,"sku":"BLZ-5-IJ","price":749.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1251\/8981\/files\/download_2_b6db0998-3e8a-4e57-93f6-cd47bdf9e90f.jpg?v=1718312576"},{"product_id":"blaze-insulated-jacket-for-professional-lux-3-burner-gas-grills-blz-3pro-ij","title":"Blaze Insulated Jacket For Professional LUX 3-Burner Gas Grills - BLZ-3PRO-IJ","description":"\u003ch2 id=\"description\" data-mnk-layout=\"1\"\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe Blaze BLZ-3PRO-IJ is the stainless steel insulated jacket for the \u003ca href=\"\/products\/blaze-34-inch-professional-w-infrared-burner-blz-3pro\"\u003eBlaze Professional LUX 34-inch 3-burner built-in gas grill (BLZ-3PRO)\u003c\/a\u003e. Blaze makes it for installing that grill in a combustible enclosure, such as a wood-framed outdoor kitchen or BBQ island: the jacket sits in the island opening and the grill head drops into it, shielding the surrounding structure from the grill's heat.\u003c\/p\u003e\n\u003cp\u003eThe jacket measures 36-3\/4\" W x 25-9\/16\" D x 11-3\/8\" H and needs a cut-out of 34-3\/4\" W x 24-11\/16\" D x 11\" H. A self-supporting ledge runs around the sides and back. Blaze's Professional grill manual says an insulated jacket is required whenever the outdoor kitchen is built from combustible materials.\u003c\/p\u003e\n\u003cp\u003eJackets are made for one grill size, so match the jacket to your grill. The 44-inch Professional LUX 4-burner grill uses the \u003ca href=\"\/products\/blaze-insulated-jacket-for-professional-lux-4-burner-gas-grills-blz-4pro-ij\"\u003eBLZ-4PRO-IJ\u003c\/a\u003e; the 3-burner Prelude LBM uses the \u003ca href=\"\/products\/blaze-insulated-jacket-for-25-inch-3-burner-gas-grills-blz-3-ij\"\u003eBLZ-3-IJ\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003ePlan before you order: cut the island to the jacket's cut-out, not the grill's own cut-out (32-1\/4\" W x 23-5\/8\" D x 10-1\/2\" H without a jacket, per the Professional grill manual). Keep the manual's 18\" clearance from combustible construction at the sides and back, and plan island venting and a gas shut-off before the counter goes on.\u003c\/p\u003e\n\u003ch2 id=\"features\"\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequired for combustible islands:\u003c\/strong\u003e lets you build the Professional LUX 34-inch grill into a wood-framed or other combustible enclosure, as the grill manual requires.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSized for one grill:\u003c\/strong\u003e made for the 3-burner Professional LUX (BLZ-3PRO); cut-out 34-3\/4\" W x 24-11\/16\" D x 11\" H.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel construction:\u003c\/strong\u003e built for outdoor use and gives the island opening a finished stainless look.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-supporting ledge:\u003c\/strong\u003e runs around the sides and back so the jacket rests on the countertop opening.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime warranty:\u003c\/strong\u003e Blaze covers the jacket against defects in manufacturing and workmanship for the original purchaser.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"specifications\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"mnk-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eBlaze\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003eBLZ-3PRO-IJ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eType\u003c\/th\u003e\n\u003ctd\u003eInsulated grill jacket for built-in installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eBlaze Professional LUX 34-inch 3-burner built-in gas grill, BLZ-3PRO-LP \/ BLZ-3PRO-NG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall width\u003c\/th\u003e\n\u003ctd\u003e36-3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall depth\u003c\/th\u003e\n\u003ctd\u003e25-9\/16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall height\u003c\/th\u003e\n\u003ctd\u003e11-3\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut-out width\u003c\/th\u003e\n\u003ctd\u003e34-3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut-out depth\u003c\/th\u003e\n\u003ctd\u003e24-11\/16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut-out height\u003c\/th\u003e\n\u003ctd\u003e11\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut-out note\u003c\/th\u003e\n\u003ctd\u003e1\/4\" to 1\/2\" gap possible below the jacket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eSelf-supporting ledge around the sides and back\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUse\u003c\/th\u003e\n\u003ctd\u003eRequired when the island is built from combustible materials\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003eLifetime, defects in manufacturing and workmanship (original purchaser, single-family home use)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cdiv class=\"mnk-kit\"\u003e\n\u003cdiv class=\"mnk-kit__col\"\u003e\n\u003ch3 id=\"whats-included\"\u003eWhat's included\u003c\/h3\u003e\n\u003cul class=\"mnk-included\"\u003e\n\u003cli\u003eStainless steel insulated jacket for the BLZ-3PRO\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBlaze publishes no packing list, hardware count or weight for this jacket. The grill is sold separately.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mnk-kit__col\"\u003e\n\u003ch3 id=\"sold-separately\"\u003eSold separately\u003c\/h3\u003e\n\u003cul class=\"mnk-optional\"\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/blaze-34-inch-professional-w-infrared-burner-blz-3pro\"\u003eBlaze Professional LUX 34-inch built-in gas grill (BLZ-3PRO)\u003c\/a\u003e: the grill this jacket is made for.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/blaze-insulated-jacket-for-professional-lux-power-burners-blz-propb-ij\"\u003eBlaze insulated jacket for Professional LUX power burners (BLZ-PROPB-IJ)\u003c\/a\u003e: for a matching Professional LUX power burner in the same combustible island.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/blaze-6-x-14-stainless-steel-island-vent-panel-blz-island-vent\"\u003eBlaze 6 x 14 stainless island vent panel (BLZ-ISLAND-VENT)\u003c\/a\u003e: the Professional grill manual says stainless vent panels are available to cover the island venting.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/blaze-insulated-jacket-for-professional-lux-4-burner-gas-grills-blz-4pro-ij\"\u003eBlaze insulated jacket for the Professional LUX 44-inch 4-burner grill (BLZ-4PRO-IJ)\u003c\/a\u003e: the other Professional LUX size.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 id=\"installation\"\u003eInstallation planning\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCut the island opening to the jacket cut-out: 34-3\/4\" W x 24-11\/16\" D x 11\" H. Blaze notes that a 1\/4\" to 1\/2\" gap is possible below the insulated jacket, so allow for it when you build the opening.\u003c\/li\u003e\n\u003cli\u003eWithout a jacket, the Professional grill manual lists a 32-1\/4\" W x 23-5\/8\" D x 10-1\/2\" H cut-out for the BLZ-3PRO; that figure applies only to non-combustible islands.\u003c\/li\u003e\n\u003cli\u003eProfessional grill manual: if the outdoor kitchen is built from combustible materials, an insulated jacket is required. Keep at least 18\" from combustible construction at the sides and 18\" at the back; the 5\" behind the grill needed for the lid to open does not meet that clearance. The grill must not be located under overhead construction.\u003c\/li\u003e\n\u003cli\u003eVent the island cavity. The manual warns that poor cavity venting can cause an explosion or fire: propane collects low and natural gas rises, so provide cross ventilation for your fuel.\u003c\/li\u003e\n\u003cli\u003eGas: the manual recommends a flex connector of at least 1\/2\" diameter and requires an installer-supplied shut-off valve in an accessible place, with the supply line routed away from heat and sharp edges.\u003c\/li\u003e\n\u003cli\u003eBlaze's insulated jacket installation sheet: a licensed professional contractor should install the jacket, and a licensed gas professional should make all gas connections.\u003c\/li\u003e\n\u003cli\u003eDo not connect a rubber gas line directly to the appliance, even one supplied with it; Blaze calls for a stainless steel flex line. Pre-installed fittings may not suit every installation, so different fittings or pipe extensions may be needed to avoid kinks and keep excess line out of the jacket.\u003c\/li\u003e\n\u003cli\u003eCheck every gas connection for leaks as the final step.\u003c\/li\u003e\n\u003cli\u003eThe jacket protects only against combustible material from the cooking surface down. The appliance manual's clearances above, behind and beside the appliance still apply.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 id=\"warranty\"\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBlaze states that its insulated jackets are covered by a lifetime warranty against defects in manufacturing and workmanship. The warranty extends to the original purchaser and applies to products bought for ordinary single-family home use. Blaze's product page gives no further conditions or exclusions for the jacket; the grill carries its own warranty, set out in its manual. Register the product with Blaze after delivery.\u003c\/p\u003e\n\u003ch3 id=\"manuals\"\u003eManuals and documents\u003c\/h3\u003e\n\u003cul class=\"mnk-docs\"\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/product\/blaze-insulated-jackets-for-gas-grills\/\" target=\"_blank\" rel=\"noopener\"\u003eBlaze product page: Insulated Jackets for Gas Grills (all sizes)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/wp-content\/uploads\/Insulated-Jacket-Installation.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBlaze Insulated Jacket Installation sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/wp-content\/uploads\/Blaze-Professional-Grill-Manual.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBlaze Professional LUX grill manual, BLZ-2PRO \/ 3PRO \/ 4PRO (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/support\/register-your-product\/\" target=\"_blank\" rel=\"noopener\"\u003eBlaze product registration\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 id=\"legal\"\u003eLegal disclaimers and warnings\u003c\/h3\u003e\n\u003cp class=\"mnk-legal\"\u003eProduct packaging, owners' manuals, installation instructions, and\/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product. WARNING: This product can expose you to chemicals including chromium (hexavalent compounds), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e\n","brand":"Blaze","offers":[{"title":"Default Title","offer_id":32791631878,"sku":"BLZ-3PRO-IJ","price":849.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1251\/8981\/files\/download_2_ae1eaeb8-ee35-4560-81c6-b512be047d1b.jpg?v=1718312570"},{"product_id":"blaze-insulated-jacket-for-double-side-burners-blz-sb2-ij","title":"Blaze Insulated Jacket For Double Side Burners - BLZ-SB2-IJ","description":"\u003ch2 id=\"description\" data-mnk-layout=\"1\"\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe Blaze BLZ-SB2-IJ is the stainless steel insulated jacket Blaze makes for its built-in double side burner. Blaze calls it essential when the side burner goes into a combustible enclosure, such as a wood-framed outdoor kitchen or BBQ island: the jacket sits in the island opening and the burner drops into it, shielding the surrounding structure from the burner's heat.\u003c\/p\u003e\n\u003cp\u003eThe jacket measures 14-3\/4\" W x 23-1\/8\" D x 9-5\/8\" H and needs a cut-out of 13-1\/4\" W x 22-1\/8\" D x 9-1\/8\" H. A self-supporting ledge runs around the sides and back.\u003c\/p\u003e\n\u003cp\u003eBlaze's page says only that it fits \"the Blaze built-in double side burner\" and names no model. We sell three Blaze double side burners: the \u003ca href=\"\/products\/blaze-premium-lte-built-in-stainless-steel-double-side-burner-with-lid-blz-sb2lte\"\u003ePremium LTE (BLZ-SB2LTE)\u003c\/a\u003e, the \u003ca href=\"\/products\/blaze-premium-lte-stainless-steel-double-side-burner-w-lid-blz-sb2-lte3\"\u003ePremium LTE (BLZ-SB2-LTE3)\u003c\/a\u003e and the \u003ca href=\"\/products\/blaze-lte-built-in-double-side-burner-w-stainless-steel-lid-blz-sb2-lteplus\"\u003eLTE+ (BLZ-SB2-LTEPLUS)\u003c\/a\u003e. \u003ca href=\"\/pages\/contact-us\"\u003eAsk us\u003c\/a\u003e to confirm the fit with Blaze for your model before you order. Power burners use their own jackets, such as the \u003ca href=\"\/products\/blaze-insulated-jacket-for-premium-lte-traditional-power-burners-blz-pb-ij\"\u003eBLZ-PB-IJ\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003ePlan before you order: the side burner is sold separately, and the jacket does not change the burner's own clearances beside or behind it.\u003c\/p\u003e\n\u003ch2 id=\"features\"\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor combustible islands:\u003c\/strong\u003e Blaze says the jacket is required to build its double side burner into an island made of combustible materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact size:\u003c\/strong\u003e 14-3\/4\" wide overall, with a 13-1\/4\" W x 22-1\/8\" D x 9-1\/8\" H cut-out.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel construction:\u003c\/strong\u003e Blaze rates it as durable in outdoor conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-supporting ledge:\u003c\/strong\u003e runs around the sides and back so the jacket rests on the countertop opening.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGap below noted:\u003c\/strong\u003e Blaze notes a 1\/4\" to 1\/2\" gap is possible below the jacket, so plan the island opening for it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"specifications\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"mnk-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eBlaze\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003eBLZ-SB2-IJ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eType\u003c\/th\u003e\n\u003ctd\u003eInsulated jacket for built-in installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits (per Blaze)\u003c\/th\u003e\n\u003ctd\u003eBlaze built-in double side burner (no model named)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall width\u003c\/th\u003e\n\u003ctd\u003e14-3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall depth\u003c\/th\u003e\n\u003ctd\u003e23-1\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall height\u003c\/th\u003e\n\u003ctd\u003e9-5\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut-out width\u003c\/th\u003e\n\u003ctd\u003e13-1\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut-out depth\u003c\/th\u003e\n\u003ctd\u003e22-1\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut-out height\u003c\/th\u003e\n\u003ctd\u003e9-1\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut-out note\u003c\/th\u003e\n\u003ctd\u003e1\/4\" to 1\/2\" gap possible below the jacket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eSelf-supporting ledge around the sides and back\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUse\u003c\/th\u003e\n\u003ctd\u003eRequired when the island is built from combustible materials\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003eBlaze pages differ on the term; see Warranty below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cdiv class=\"mnk-kit\"\u003e\n\u003cdiv class=\"mnk-kit__col\"\u003e\n\u003ch3 id=\"whats-included\"\u003eWhat's included\u003c\/h3\u003e\n\u003cul class=\"mnk-included\"\u003e\n\u003cli\u003eStainless steel insulated jacket for a Blaze double side burner\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBlaze publishes no packing list, hardware count or weight for this jacket. The side burner is sold separately.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mnk-kit__col\"\u003e\n\u003ch3 id=\"sold-separately\"\u003eSold separately\u003c\/h3\u003e\n\u003cul class=\"mnk-optional\"\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/blaze-premium-lte-built-in-stainless-steel-double-side-burner-with-lid-blz-sb2lte\"\u003eBlaze Premium LTE double side burner (BLZ-SB2LTE)\u003c\/a\u003e: confirm fit with us first.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/blaze-lte-built-in-double-side-burner-w-stainless-steel-lid-blz-sb2-lteplus\"\u003eBlaze LTE+ double side burner (BLZ-SB2-LTEPLUS)\u003c\/a\u003e: confirm fit with us first.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/blaze-cover-for-premium-lte-built-in-double-side-burners-2sbbicv\"\u003eBlaze cover for Premium LTE built-in double side burners (2SBBICV)\u003c\/a\u003e: protects the burner between uses.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/blaze-6-x-14-stainless-steel-island-vent-panel-blz-island-vent\"\u003eBlaze 6 x 14 stainless island vent panel (BLZ-ISLAND-VENT)\u003c\/a\u003e: a stainless cover for the island vents.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 id=\"installation\"\u003eInstallation planning\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCut the island opening to the jacket cut-out: 13-1\/4\" W x 22-1\/8\" D x 9-1\/8\" H. Blaze notes that a 1\/4\" to 1\/2\" gap is possible below the insulated jacket, so allow for it when you build the opening.\u003c\/li\u003e\n\u003cli\u003eThe LTE+ double side burner manual says the burner must go in a non-combustible enclosure, and that an insulated jacket is required if the island is combustible.\u003c\/li\u003e\n\u003cli\u003eA licensed professional contractor should install the jacket, and a licensed gas professional should make every gas connection (Blaze insulated jacket installation sheet).\u003c\/li\u003e\n\u003cli\u003eBlaze does not allow a rubber gas line connected directly to the appliance inside the jacket, even one supplied with it: use a stainless steel flex line. Different fittings or a pipe extension may be needed to avoid kinks and keep excess line out of the jacket.\u003c\/li\u003e\n\u003cli\u003eLeak-check every gas connection as the final step and correct any leak before use.\u003c\/li\u003e\n\u003cli\u003eThe jacket protects combustible material from the cooking surface down only. The side burner manual's clearances beside, behind and above the burner still apply, as do its island-venting rules.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 id=\"warranty\"\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBlaze's pages do not agree on the term for this jacket: its double side burner jacket page states a 1-year warranty to the original owner against defects in manufacturing and workmanship, while its main insulated jacket page states a lifetime warranty for the jackets. Both limit coverage to products bought for ordinary single-family home use. We are checking the term with Blaze; \u003ca href=\"\/pages\/contact-us\"\u003eask us\u003c\/a\u003e before you order if the term matters to you. The side burner you set in it carries its own warranty, set out in its manual. Register the product with Blaze after delivery.\u003c\/p\u003e\n\u003ch3 id=\"manuals\"\u003eManuals and documents\u003c\/h3\u003e\n\u003cul class=\"mnk-docs\"\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/product\/blaze-insulated-jacket-for-double-side-burners\/\" target=\"_blank\" rel=\"noopener\"\u003eBlaze product page: Insulated Jacket For Double Side Burners\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/wp-content\/uploads\/Insulated-Jacket-Installation.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBlaze Insulated Jacket Installation sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/wp-content\/uploads\/BLZ-SB2-LTEPLUS-BLZ-SB2LTE3-manual.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBlaze LTE+ double side burner user manual, BLZ-SB2-LTEPLUS \/ BLZ-SB2LTE3 (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/support\/register-your-product\/\" target=\"_blank\" rel=\"noopener\"\u003eBlaze product registration\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 id=\"legal\"\u003eLegal disclaimers and warnings\u003c\/h3\u003e\n\u003cp class=\"mnk-legal\"\u003eProduct packaging, owners' manuals, installation instructions, and\/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product. WARNING: This product can expose you to chemicals including chromium (hexavalent compounds), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e\n","brand":"Blaze","offers":[{"title":"Default Title","offer_id":32791632070,"sku":"BLZ-SB2-IJ","price":429.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1251\/8981\/files\/download_3_7f0e3de8-6191-4d0c-a977-0dda58b6b798.jpg?v=1718312562"},{"product_id":"blaze-insulated-jacket-for-premium-lte-traditional-power-burners-blz-pb-ij","title":"Blaze Insulated Jacket For Premium LTE \/ Traditional Power Burners - BLZ-PB-IJ","description":"\u003ch2 id=\"description\" data-mnk-layout=\"1\"\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe Blaze BLZ-PB-IJ is the stainless steel insulated jacket Blaze lists for its LTE and Traditional built-in power burners, such as the \u003ca href=\"\/products\/blaze-high-performance-power-burner-sku-blz-pb-built-in-burner\"\u003eBlaze Premium LTE power burner (BLZ-PBLTE)\u003c\/a\u003e. Blaze makes it for building the burner into a combustible enclosure, such as a wood-framed outdoor kitchen or BBQ island: the jacket lines the opening and the burner drops into it.\u003c\/p\u003e\n\u003cp\u003eThe jacket measures 18-1\/8\" W x 21-3\/8\" D x 9\" H and needs a cut-out of 16-1\/2\" W x 20-1\/2\" D x 8-3\/4\" H. A self-supporting ledge runs around the sides and back. Blaze's power burner manual says an insulated jacket is required when the outdoor kitchen is built from combustible materials.\u003c\/p\u003e\n\u003cp\u003eThe taller Professional LUX and LTE PRO power burners use a different jacket, the \u003ca href=\"\/products\/blaze-insulated-jacket-for-professional-lux-power-burners-blz-propb-ij\"\u003eBLZ-PROPB-IJ\u003c\/a\u003e (10-1\/4\" tall). Blaze's jacket page does not name the newer \u003ca href=\"\/products\/blaze-premium-lte-built-in-high-performance-power-burner-w-wok-ring-stainless-steel-lid-blz-pblte3\"\u003ePremium LTE+ power burner (BLZ-PBLTE3)\u003c\/a\u003e, so \u003ca href=\"\/pages\/contact-us\"\u003eask us\u003c\/a\u003e to confirm the jacket for that model before you order.\u003c\/p\u003e\n\u003cp\u003ePlan before you order: cut the island to the jacket's cut-out, not the burner's own cut-out (14\" W x 19-1\/2\" D x 8\" H without a jacket for the BLZ-PBLTE, per the power burner manual). The burner is sold separately, and the jacket does not change the burner's own clearances above, behind or beside it.\u003c\/p\u003e\n\u003ch2 id=\"features\"\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequired for combustible islands:\u003c\/strong\u003e lets you build a Blaze LTE or Traditional power burner into a wood-framed or other combustible enclosure, as the burner manual requires.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade for the shorter burners:\u003c\/strong\u003e 9\" tall; cut-out 16-1\/2\" W x 20-1\/2\" D x 8-3\/4\" H.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel construction:\u003c\/strong\u003e built for outdoor use and gives the island opening a finished stainless look.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-supporting ledge:\u003c\/strong\u003e runs around the sides and back so the jacket rests on the countertop opening.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime warranty:\u003c\/strong\u003e Blaze covers the jacket against defects in manufacturing and workmanship for the original purchaser.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"specifications\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"mnk-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eBlaze\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003eBLZ-PB-IJ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eType\u003c\/th\u003e\n\u003ctd\u003eInsulated jacket for a built-in power burner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits (per Blaze)\u003c\/th\u003e\n\u003ctd\u003eBlaze LTE \/ Traditional built-in power burners, including the Premium LTE power burner (BLZ-PBLTE-LP \/ NG)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot for\u003c\/th\u003e\n\u003ctd\u003eProfessional LUX and LTE PRO power burners (use BLZ-PROPB-IJ)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall width\u003c\/th\u003e\n\u003ctd\u003e18-1\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall depth\u003c\/th\u003e\n\u003ctd\u003e21-3\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall height\u003c\/th\u003e\n\u003ctd\u003e9\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut-out width\u003c\/th\u003e\n\u003ctd\u003e16-1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut-out depth\u003c\/th\u003e\n\u003ctd\u003e20-1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut-out height\u003c\/th\u003e\n\u003ctd\u003e8-3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut-out note\u003c\/th\u003e\n\u003ctd\u003e1\/4\" to 1\/2\" gap possible below the jacket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eSelf-supporting ledge around the sides and back\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUse\u003c\/th\u003e\n\u003ctd\u003eRequired when the island is built from combustible materials\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003eLifetime, defects in manufacturing and workmanship (original purchaser, single-family home use)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cdiv class=\"mnk-kit\"\u003e\n\u003cdiv class=\"mnk-kit__col\"\u003e\n\u003ch3 id=\"whats-included\"\u003eWhat's included\u003c\/h3\u003e\n\u003cul class=\"mnk-included\"\u003e\n\u003cli\u003eStainless steel insulated jacket for one LTE or Traditional power burner\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBlaze publishes no packing list, hardware count or weight for this jacket. The power burner is sold separately.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mnk-kit__col\"\u003e\n\u003ch3 id=\"sold-separately\"\u003eSold separately\u003c\/h3\u003e\n\u003cul class=\"mnk-optional\"\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/blaze-high-performance-power-burner-sku-blz-pb-built-in-burner\"\u003eBlaze Premium LTE built-in power burner (BLZ-PBLTE)\u003c\/a\u003e: a burner this jacket is made for.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/blaze-insulated-jacket-for-32-inch-4-burner-gas-grills-blz-4-ij\"\u003eBlaze insulated jacket for 32-inch Prelude LBM and Premium LTE grills (BLZ-4-IJ)\u003c\/a\u003e: for a matching Premium LTE grill in the same combustible island.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/blaze-6-x-14-stainless-steel-island-vent-panel-blz-island-vent\"\u003eBlaze 6 x 14 stainless island vent panel (BLZ-ISLAND-VENT)\u003c\/a\u003e: the power burner manual says stainless vent panels are available to cover the island venting.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/blaze-20-inch-stainless-steel-roll-out-trash-propane-tank-drawer-blz-trlp-drw-h\"\u003eBlaze roll-out trash and propane tank drawer (BLZ-TRLP-DRW-H)\u003c\/a\u003e: the manual names Blaze's propane tank drawer as an alternative to a plenum wall for a tank inside the island.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 id=\"installation\"\u003eInstallation planning\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCut the island opening to the jacket cut-out: 16-1\/2\" W x 20-1\/2\" D x 8-3\/4\" H. Blaze notes that a 1\/4\" to 1\/2\" gap is possible below the insulated jacket, so allow for it when you build the opening.\u003c\/li\u003e\n\u003cli\u003eWithout a jacket, the power burner manual gives the BLZ-PBLTE a 14\" W x 19-1\/2\" D x 8\" H size; that applies only to non-combustible islands, and the opening must not be larger than the burner's outer frame.\u003c\/li\u003e\n\u003cli\u003ePower burner manual (version 1.0, BLZ-PBLTE \/ BLZ-PROPB): keep at least 16\" from combustible material at the sides and back. The burner must not be located under overhead construction or where an overhang or awning may cover it.\u003c\/li\u003e\n\u003cli\u003eVent the island: propane is heavier than air and settles low, natural gas is lighter and rises, so vent for your fuel. A propane cylinder inside the island needs a plenum wall or Blaze's propane tank drawer.\u003c\/li\u003e\n\u003cli\u003eGas: natural gas runs at 4\" water column (flex connector at least 1\/2\" diameter) and propane at 11\" water column. The installer supplies an accessible shut-off valve; Massachusetts requires a T-handle valve.\u003c\/li\u003e\n\u003cli\u003eA licensed professional contractor should install the jacket, and a licensed gas professional should make every gas connection (Blaze insulated jacket installation sheet).\u003c\/li\u003e\n\u003cli\u003eBlaze does not allow a rubber gas line connected directly to the appliance inside the jacket, even one supplied with it: use a stainless steel flex line. The appliance's fittings may not suit every installation, so different fittings or a pipe extension may be needed to avoid kinks and keep excess line out of the jacket.\u003c\/li\u003e\n\u003cli\u003eLeak-check every gas connection as the final step and correct any leak before use.\u003c\/li\u003e\n\u003cli\u003eThe jacket protects combustible material from the cooking surface down only. The appliance manual's clearances above, behind and beside the appliance still apply.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 id=\"warranty\"\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBlaze states that its insulated jackets are covered by a lifetime warranty against defects in manufacturing and workmanship. The warranty extends to the original purchaser and applies to products bought for ordinary single-family home use. Blaze's product page gives no further conditions or exclusions for the jacket; the power burner you set in it carries its own warranty, set out in its manual. Register the product with Blaze after delivery.\u003c\/p\u003e\n\u003ch3 id=\"manuals\"\u003eManuals and documents\u003c\/h3\u003e\n\u003cul class=\"mnk-docs\"\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/product\/blaze-power-burner-insulated-jackets\/\" target=\"_blank\" rel=\"noopener\"\u003eBlaze product page: Power Burner Insulated Jackets (BLZ-PB-IJ and BLZ-PROPB-IJ)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/wp-content\/uploads\/Insulated-Jacket-Installation.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBlaze Insulated Jacket Installation sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/wp-content\/uploads\/Blaze-Power-Burner-User-Manual.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBlaze power burner manual, version 1.0, BLZ-PBLTE \/ BLZ-PROPB (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/support\/register-your-product\/\" target=\"_blank\" rel=\"noopener\"\u003eBlaze product registration\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 id=\"legal\"\u003eLegal disclaimers and warnings\u003c\/h3\u003e\n\u003cp class=\"mnk-legal\"\u003eProduct packaging, owners' manuals, installation instructions, and\/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product. WARNING: This product can expose you to chemicals including chromium (hexavalent compounds), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e\n","brand":"Blaze","offers":[{"title":"Default Title","offer_id":32791632390,"sku":"BLZ-PB-IJ","price":479.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1251\/8981\/files\/download_3_ef270e05-5e53-4ba8-9228-daad03b7c891.jpg?v=1718312557"},{"product_id":"blaze-insulated-jacket-for-professional-lux-power-burners-blz-propb-ij","title":"Blaze Insulated Jacket For Professional LUX Power Burners - BLZ-PROPB-IJ","description":"\u003ch2 id=\"description\" data-mnk-layout=\"1\"\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe Blaze BLZ-PROPB-IJ is the stainless steel insulated jacket for Blaze's taller built-in power burners: the \u003ca href=\"\/products\/blaze-professional-lux-built-in-burner-w-wok-ring-stainless-steel-lid-blz-propb\"\u003eProfessional LUX power burner (BLZ-PROPB)\u003c\/a\u003e and the \u003ca href=\"\/products\/blaze-lte-pro-built-in-power-burner-w-stainless-steel-lid-blz-pbltepro\"\u003eLTE PRO power burner (BLZ-PB-LTEPRO)\u003c\/a\u003e. Blaze makes it for building either burner into a combustible enclosure, such as a wood-framed outdoor kitchen or BBQ island: the jacket lines the opening and the burner drops into it.\u003c\/p\u003e\n\u003cp\u003eThe jacket measures 18-1\/8\" W x 21-3\/8\" D x 10-1\/4\" H and needs a cut-out of 16-1\/2\" W x 20-1\/2\" D x 9-3\/4\" H. A self-supporting ledge runs around the sides and back. Both power burner manuals say an insulated jacket is required when the outdoor kitchen is built from combustible materials.\u003c\/p\u003e\n\u003cp\u003eThe shorter Premium LTE and Traditional power burners use a different jacket, the \u003ca href=\"\/products\/blaze-insulated-jacket-for-premium-lte-traditional-power-burners-blz-pb-ij\"\u003eBLZ-PB-IJ\u003c\/a\u003e (9\" tall instead of 10-1\/4\").\u003c\/p\u003e\n\u003cp\u003ePlan before you order: cut the island to the jacket's cut-out, not the burner's own cut-out (14\" W x 19-1\/2\" D x 9-1\/4\" H without a jacket for both burners). The burner is sold separately, and the jacket does not change the burner's own clearances above, behind or beside it.\u003c\/p\u003e\n\u003ch2 id=\"features\"\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequired for combustible islands:\u003c\/strong\u003e lets you build a Professional LUX or LTE PRO power burner into a wood-framed or other combustible enclosure, as the burner manuals require.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade for the taller burners:\u003c\/strong\u003e 10-1\/4\" tall, sized for the BLZ-PROPB and BLZ-PB-LTEPRO; cut-out 16-1\/2\" W x 20-1\/2\" D x 9-3\/4\" H.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel construction:\u003c\/strong\u003e built for outdoor use and gives the island opening a finished stainless look.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-supporting ledge:\u003c\/strong\u003e runs around the sides and back so the jacket rests on the countertop opening.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime warranty:\u003c\/strong\u003e Blaze covers the jacket against defects in manufacturing and workmanship for the original purchaser.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"specifications\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"mnk-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eBlaze\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003eBLZ-PROPB-IJ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eType\u003c\/th\u003e\n\u003ctd\u003eInsulated jacket for a built-in power burner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eBlaze Professional LUX power burner (BLZ-PROPB-LP \/ NG) and LTE PRO power burner (BLZ-PB-LTEPRO-LP \/ NG)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot for\u003c\/th\u003e\n\u003ctd\u003ePremium LTE and Traditional power burners (use BLZ-PB-IJ)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall width\u003c\/th\u003e\n\u003ctd\u003e18-1\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall depth\u003c\/th\u003e\n\u003ctd\u003e21-3\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall height\u003c\/th\u003e\n\u003ctd\u003e10-1\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut-out width\u003c\/th\u003e\n\u003ctd\u003e16-1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut-out depth\u003c\/th\u003e\n\u003ctd\u003e20-1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut-out height\u003c\/th\u003e\n\u003ctd\u003e9-3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut-out note\u003c\/th\u003e\n\u003ctd\u003e1\/4\" to 1\/2\" gap possible below the jacket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eSelf-supporting ledge around the sides and back\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUse\u003c\/th\u003e\n\u003ctd\u003eRequired when the island is built from combustible materials\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003eLifetime, defects in manufacturing and workmanship (original purchaser, single-family home use)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cdiv class=\"mnk-kit\"\u003e\n\u003cdiv class=\"mnk-kit__col\"\u003e\n\u003ch3 id=\"whats-included\"\u003eWhat's included\u003c\/h3\u003e\n\u003cul class=\"mnk-included\"\u003e\n\u003cli\u003eStainless steel insulated jacket for one Professional LUX or LTE PRO power burner\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBlaze publishes no packing list, hardware count or weight for this jacket. The power burner is sold separately.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mnk-kit__col\"\u003e\n\u003ch3 id=\"sold-separately\"\u003eSold separately\u003c\/h3\u003e\n\u003cul class=\"mnk-optional\"\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/blaze-professional-lux-built-in-burner-w-wok-ring-stainless-steel-lid-blz-propb\"\u003eBlaze Professional LUX built-in power burner (BLZ-PROPB)\u003c\/a\u003e: one of the two burners this jacket is made for.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/blaze-lte-pro-built-in-power-burner-w-stainless-steel-lid-blz-pbltepro\"\u003eBlaze LTE PRO built-in power burner (BLZ-PB-LTEPRO)\u003c\/a\u003e: the other burner this jacket fits.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/blaze-insulated-jacket-for-professional-lux-4-burner-gas-grills-blz-4pro-ij\"\u003eBlaze insulated jacket for the Professional LUX 44-inch grill (BLZ-4PRO-IJ)\u003c\/a\u003e or \u003ca href=\"\/products\/blaze-insulated-jacket-for-lte-pro-32-inch-4-burner-gas-grill-blz-4-ij2\"\u003eLTE PRO 32-inch grill (BLZ-4-IJ2)\u003c\/a\u003e: for the matching grill in the same combustible island.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/blaze-6-x-14-stainless-steel-island-vent-panel-blz-island-vent\"\u003eBlaze 6 x 14 stainless island vent panel (BLZ-ISLAND-VENT)\u003c\/a\u003e: the power burner manual says stainless vent panels are available to cover the island venting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 id=\"installation\"\u003eInstallation planning\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCut the island opening to the jacket cut-out: 16-1\/2\" W x 20-1\/2\" D x 9-3\/4\" H. Blaze notes that a 1\/4\" to 1\/2\" gap is possible below the insulated jacket, so allow for it when you build the opening.\u003c\/li\u003e\n\u003cli\u003eWithout a jacket, both burners use a 14\" W x 19-1\/2\" D x 9-1\/4\" H cut-out; that figure applies only to non-combustible islands, and the opening must not be larger than the burner's outer frame.\u003c\/li\u003e\n\u003cli\u003eClearances to combustible material at the sides and back: 16\" in the Blaze power burner manual (version 1.0, covering BLZ-PBLTE and BLZ-PROPB), which also says the burner must not be located under overhead construction or an awning; 18\" in the LTE+ and LTE PRO power burner manual (BLZ-PBLTE3 \/ BLZ-PB-LTEPRO), which allows a non-combustible overhead only with 72\" of clearance and a vent hood. Follow the manual shipped with your burner.\u003c\/li\u003e\n\u003cli\u003eVent the island: propane is heavier than air and settles low, natural gas is lighter and rises, so vent for your fuel. A propane cylinder inside the island needs a plenum wall or Blaze's propane tank drawer.\u003c\/li\u003e\n\u003cli\u003eGas: natural gas runs at 4\" water column (flex connector at least 1\/2\" diameter) and propane at 11\" water column. The installer supplies an accessible shut-off valve; Massachusetts requires a T-handle valve.\u003c\/li\u003e\n\u003cli\u003eA licensed professional contractor should install the jacket, and a licensed gas professional should make every gas connection (Blaze insulated jacket installation sheet).\u003c\/li\u003e\n\u003cli\u003eBlaze does not allow a rubber gas line connected directly to the appliance inside the jacket, even one supplied with it: use a stainless steel flex line. The appliance's fittings may not suit every installation, so different fittings or a pipe extension may be needed to avoid kinks and keep excess line out of the jacket.\u003c\/li\u003e\n\u003cli\u003eLeak-check every gas connection as the final step and correct any leak before use.\u003c\/li\u003e\n\u003cli\u003eThe jacket protects combustible material from the cooking surface down only. The appliance manual's clearances above, behind and beside the appliance still apply.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 id=\"warranty\"\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBlaze states that its insulated jackets are covered by a lifetime warranty against defects in manufacturing and workmanship. The warranty extends to the original purchaser and applies to products bought for ordinary single-family home use. Blaze's product page gives no further conditions or exclusions for the jacket; the power burner you set in it carries its own warranty, set out in its manual. Register the product with Blaze after delivery.\u003c\/p\u003e\n\u003ch3 id=\"manuals\"\u003eManuals and documents\u003c\/h3\u003e\n\u003cul class=\"mnk-docs\"\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/product\/blaze-power-burner-insulated-jackets\/\" target=\"_blank\" rel=\"noopener\"\u003eBlaze product page: Power Burner Insulated Jackets (BLZ-PB-IJ and BLZ-PROPB-IJ)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/wp-content\/uploads\/Insulated-Jacket-Installation.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBlaze Insulated Jacket Installation sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/wp-content\/uploads\/Blaze-Power-Burner-User-Manual.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBlaze power burner manual, version 1.0, BLZ-PBLTE \/ BLZ-PROPB (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/wp-content\/uploads\/BLZ-PBLTE3-BLZ-PB-LTEPRO-manual-1.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBlaze LTE+ and LTE PRO power burner manual, BLZ-PBLTE3 \/ BLZ-PB-LTEPRO (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/support\/register-your-product\/\" target=\"_blank\" rel=\"noopener\"\u003eBlaze product registration\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 id=\"legal\"\u003eLegal disclaimers and warnings\u003c\/h3\u003e\n\u003cp class=\"mnk-legal\"\u003eProduct packaging, owners' manuals, installation instructions, and\/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product. WARNING: This product can expose you to chemicals including chromium (hexavalent compounds), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e\n","brand":"Blaze","offers":[{"title":"Default Title","offer_id":32791632710,"sku":"BLZ-PROPB-IJ","price":549.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1251\/8981\/products\/blz-pb-ij.jpg?v=1718312551"},{"product_id":"blaze-insulated-jacket-for-professional-lux-4-burner-gas-grills-blz-4pro-ij","title":"Blaze Insulated Jacket For Professional LUX 4-Burner Gas Grills - BLZ-4PRO-IJ","description":"\u003ch2 id=\"description\" data-mnk-layout=\"1\"\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe Blaze BLZ-4PRO-IJ is the stainless steel insulated jacket for the \u003ca href=\"\/products\/blaze-professional-lux-44-inch-4-burner-built-in-gas-grill-with-rear-infrared-burner-blz-4pro\"\u003eBlaze Professional LUX 44-inch 4-burner built-in gas grill (BLZ-4PRO)\u003c\/a\u003e. Blaze makes it for installing that grill in a combustible enclosure, such as a wood-framed outdoor kitchen or BBQ island: the jacket sits in the island opening and the grill head drops into it, shielding the surrounding structure from the grill's heat.\u003c\/p\u003e\n\u003cp\u003eThe jacket measures 46-1\/2\" W x 25-7\/8\" D x 11-3\/8\" H and needs a cut-out of 44-7\/8\" W x 24-11\/16\" D x 11\" H. A self-supporting ledge runs around the sides and back. Blaze's Professional grill manual says an insulated jacket is required whenever the outdoor kitchen is built from combustible materials.\u003c\/p\u003e\n\u003cp\u003eJackets are made for one grill size, so match the jacket to your grill. The 34-inch Professional LUX 3-burner grill uses the \u003ca href=\"\/products\/blaze-insulated-jacket-for-professional-lux-3-burner-gas-grills-blz-3pro-ij\"\u003eBLZ-3PRO-IJ\u003c\/a\u003e; Blaze 4-burner Prelude LBM and Premium LTE grills use the \u003ca href=\"\/products\/blaze-insulated-jacket-for-32-inch-4-burner-gas-grills-blz-4-ij\"\u003eBLZ-4-IJ\u003c\/a\u003e, and the LTE PRO 32-inch uses the \u003ca href=\"\/products\/blaze-insulated-jacket-for-lte-pro-32-inch-4-burner-gas-grill-blz-4-ij2\"\u003eBLZ-4-IJ2\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003ePlan before you order: cut the island to the jacket's cut-out, not the grill's own cut-out (42-1\/2\" W x 23-5\/8\" D x 10-1\/2\" H without a jacket, per the Professional grill manual). Keep the manual's 18\" clearance from combustible construction at the sides and back, and plan island venting and a gas shut-off before the counter goes on.\u003c\/p\u003e\n\u003ch2 id=\"features\"\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequired for combustible islands:\u003c\/strong\u003e lets you build the Professional LUX 44-inch grill into a wood-framed or other combustible enclosure, as the grill manual requires.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSized for one grill:\u003c\/strong\u003e made for the 4-burner Professional LUX (BLZ-4PRO); cut-out 44-7\/8\" W x 24-11\/16\" D x 11\" H.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel construction:\u003c\/strong\u003e built for outdoor use and gives the island opening a finished stainless look.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-supporting ledge:\u003c\/strong\u003e runs around the sides and back so the jacket rests on the countertop opening.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime warranty:\u003c\/strong\u003e Blaze covers the jacket against defects in manufacturing and workmanship for the original purchaser.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"specifications\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"mnk-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eBlaze\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003eBLZ-4PRO-IJ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eType\u003c\/th\u003e\n\u003ctd\u003eInsulated grill jacket for built-in installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eBlaze Professional LUX 44-inch 4-burner built-in gas grill, BLZ-4PRO-LP \/ BLZ-4PRO-NG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall width\u003c\/th\u003e\n\u003ctd\u003e46-1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall depth\u003c\/th\u003e\n\u003ctd\u003e25-7\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall height\u003c\/th\u003e\n\u003ctd\u003e11-3\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut-out width\u003c\/th\u003e\n\u003ctd\u003e44-7\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut-out depth\u003c\/th\u003e\n\u003ctd\u003e24-11\/16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut-out height\u003c\/th\u003e\n\u003ctd\u003e11\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut-out note\u003c\/th\u003e\n\u003ctd\u003e1\/4\" to 1\/2\" gap possible below the jacket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eSelf-supporting ledge around the sides and back\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUse\u003c\/th\u003e\n\u003ctd\u003eRequired when the island is built from combustible materials\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003eLifetime, defects in manufacturing and workmanship (original purchaser, single-family home use)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cdiv class=\"mnk-kit\"\u003e\n\u003cdiv class=\"mnk-kit__col\"\u003e\n\u003ch3 id=\"whats-included\"\u003eWhat's included\u003c\/h3\u003e\n\u003cul class=\"mnk-included\"\u003e\n\u003cli\u003eStainless steel insulated jacket for the BLZ-4PRO\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBlaze publishes no packing list, hardware count or weight for this jacket. The grill is sold separately.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mnk-kit__col\"\u003e\n\u003ch3 id=\"sold-separately\"\u003eSold separately\u003c\/h3\u003e\n\u003cul class=\"mnk-optional\"\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/blaze-professional-lux-44-inch-4-burner-built-in-gas-grill-with-rear-infrared-burner-blz-4pro\"\u003eBlaze Professional LUX 44-inch built-in gas grill (BLZ-4PRO)\u003c\/a\u003e: the grill this jacket is made for.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/blaze-insulated-jacket-for-professional-lux-power-burners-blz-propb-ij\"\u003eBlaze insulated jacket for Professional LUX power burners (BLZ-PROPB-IJ)\u003c\/a\u003e: for a matching Professional LUX power burner in the same combustible island.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/blaze-6-x-14-stainless-steel-island-vent-panel-blz-island-vent\"\u003eBlaze 6 x 14 stainless island vent panel (BLZ-ISLAND-VENT)\u003c\/a\u003e: the Professional grill manual says stainless vent panels are available to cover the island venting.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/blaze-insulated-jacket-for-professional-lux-3-burner-gas-grills-blz-3pro-ij\"\u003eBlaze insulated jacket for the Professional LUX 34-inch 3-burner grill (BLZ-3PRO-IJ)\u003c\/a\u003e: the other Professional LUX size.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 id=\"installation\"\u003eInstallation planning\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCut the island opening to the jacket cut-out: 44-7\/8\" W x 24-11\/16\" D x 11\" H. Blaze notes that a 1\/4\" to 1\/2\" gap is possible below the insulated jacket, so allow for it when you build the opening.\u003c\/li\u003e\n\u003cli\u003eWithout a jacket, the Professional grill manual lists a 42-1\/2\" W x 23-5\/8\" D x 10-1\/2\" H cut-out for the BLZ-4PRO; that figure applies only to non-combustible islands.\u003c\/li\u003e\n\u003cli\u003eProfessional grill manual: if the outdoor kitchen is built from combustible materials, an insulated jacket is required. Keep at least 18\" from combustible construction at the sides and 18\" at the back; the 5\" behind the grill needed for the lid to open does not meet that clearance. The grill must not be located under overhead construction.\u003c\/li\u003e\n\u003cli\u003eVent the island cavity. The manual warns that poor cavity venting can cause an explosion or fire: propane collects low and natural gas rises, so provide cross ventilation for your fuel.\u003c\/li\u003e\n\u003cli\u003eGas: the manual recommends a flex connector of at least 1\/2\" diameter and requires an installer-supplied shut-off valve in an accessible place, with the supply line routed away from heat and sharp edges.\u003c\/li\u003e\n\u003cli\u003eBlaze's insulated jacket installation sheet: a licensed professional contractor should install the jacket, and a licensed gas professional should make all gas connections.\u003c\/li\u003e\n\u003cli\u003eDo not connect a rubber gas line directly to the appliance, even one supplied with it; Blaze calls for a stainless steel flex line. Pre-installed fittings may not suit every installation, so different fittings or pipe extensions may be needed to avoid kinks and keep excess line out of the jacket.\u003c\/li\u003e\n\u003cli\u003eCheck every gas connection for leaks as the final step.\u003c\/li\u003e\n\u003cli\u003eThe jacket protects only against combustible material from the cooking surface down. The appliance manual's clearances above, behind and beside the appliance still apply.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 id=\"warranty\"\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBlaze states that its insulated jackets are covered by a lifetime warranty against defects in manufacturing and workmanship. The warranty extends to the original purchaser and applies to products bought for ordinary single-family home use. Blaze's product page gives no further conditions or exclusions for the jacket; the grill carries its own warranty, set out in its manual. Register the product with Blaze after delivery.\u003c\/p\u003e\n\u003ch3 id=\"manuals\"\u003eManuals and documents\u003c\/h3\u003e\n\u003cul class=\"mnk-docs\"\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/product\/blaze-insulated-jackets-for-gas-grills\/\" target=\"_blank\" rel=\"noopener\"\u003eBlaze product page: Insulated Jackets for Gas Grills (all sizes)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/wp-content\/uploads\/Insulated-Jacket-Installation.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBlaze Insulated Jacket Installation sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/wp-content\/uploads\/Blaze-Professional-Grill-Manual.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBlaze Professional LUX grill manual, BLZ-2PRO \/ 3PRO \/ 4PRO (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/support\/register-your-product\/\" target=\"_blank\" rel=\"noopener\"\u003eBlaze product registration\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 id=\"legal\"\u003eLegal disclaimers and warnings\u003c\/h3\u003e\n\u003cp class=\"mnk-legal\"\u003eProduct packaging, owners' manuals, installation instructions, and\/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product. WARNING: This product can expose you to chemicals including chromium (hexavalent compounds), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e\n","brand":"Blaze","offers":[{"title":"Default Title","offer_id":49149640573207,"sku":"BLZ-4PRO-IJ","price":999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1251\/8981\/files\/download_1_bdd9e1e5-a2e0-4f96-8ced-9c870245f71c.jpg?v=1718310730"},{"product_id":"blaze-insulated-jacket-for-30-inch-gas-griddles-blz-griddle-ij","title":"Blaze Insulated Jacket For 30-Inch Gas Griddles - BLZ-GRIDDLE-IJ","description":"\u003ch2 id=\"description\" data-mnk-layout=\"1\"\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe Blaze BLZ-GRIDDLE-IJ is the stainless steel insulated jacket Blaze lists for its LTE 30-inch gas griddle, sold here as the \u003ca href=\"\/products\/blaze-30-inch-built-in-griddle-sku-blz-griddle\"\u003eBlaze Premium LTE 30-inch built-in gas griddle (BLZ-GRIDDLE-LTE)\u003c\/a\u003e. Blaze's griddle manual makes an insulated jacket a requirement when the outdoor kitchen or island is built of combustible material. The jacket lines the griddle opening and carries the griddle on a self-supporting ledge around the sides and back.\u003c\/p\u003e\n\u003cp\u003eThe jacket measures 32-3\/8\" W x 26-3\/8\" D x 13-1\/8\" H and needs an island cut-out of 30-5\/8\" W x 25\" D x 12-3\/4\" H.\u003c\/p\u003e\n\u003cp\u003eCheck your griddle generation before you order. Blaze makes a separate jacket for each 30-inch griddle: this BLZ-GRIDDLE-IJ for the LTE griddle, the \u003ca href=\"\/products\/blaze-insulated-jacket-for-lte-30-inch-gas-griddle-blz-griddle-ij2\"\u003eBLZ-GRIDDLE-IJ2\u003c\/a\u003e for the current LTE+ griddle (\u003ca href=\"\/products\/blaze-lte-30-inch-built-in-gas-griddle-blz-griddle-lte3\"\u003eBLZ-GRIDDLE-LTE3\u003c\/a\u003e), and the \u003ca href=\"\/products\/blaze-insulated-jacket-for-lte-pro-40-inch-gas-griddle-blz-griddle40-ij\"\u003eBLZ-GRIDDLE40-IJ\u003c\/a\u003e for the LTE PRO 40-inch griddle. The griddle is sold separately, and the jacket does not change the griddle's clearances above, behind or beside it.\u003c\/p\u003e\n\u003ch2 id=\"features\"\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade for the Blaze LTE 30-inch griddle:\u003c\/strong\u003e the jacket Blaze lists for that griddle (BLZ-GRIDDLE-LTE).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequired for combustible islands:\u003c\/strong\u003e lets you build the griddle into a wood-framed or other combustible enclosure, as the griddle manual requires.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-supporting ledge:\u003c\/strong\u003e a ledge around the sides and back supports the griddle in the opening.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel construction:\u003c\/strong\u003e made for outdoor kitchens and backed by Blaze's lifetime warranty against manufacturing defects.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePublished cut-out:\u003c\/strong\u003e 30-5\/8\" W x 25\" D x 12-3\/4\" H, so the island builder can frame the opening before the jacket arrives.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"specifications\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"mnk-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eBlaze\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003eBLZ-GRIDDLE-IJ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eType\u003c\/th\u003e\n\u003ctd\u003eInsulated jacket for a built-in gas griddle; griddle not included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits (per Blaze)\u003c\/th\u003e\n\u003ctd\u003eBlaze LTE 30-Inch Gas Griddle (BLZ-GRIDDLE-LTE)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot for\u003c\/th\u003e\n\u003ctd\u003eLTE+ 30-inch griddle BLZ-GRIDDLE-LTE3 (use BLZ-GRIDDLE-IJ2) or LTE PRO 40-inch griddle (use BLZ-GRIDDLE40-IJ)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall size\u003c\/th\u003e\n\u003ctd\u003e32-3\/8\" W x 26-3\/8\" D x 13-1\/8\" H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eIsland cut-out for the jacket\u003c\/th\u003e\n\u003ctd\u003e30-5\/8\" W x 25\" D x 12-3\/4\" H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut-out note\u003c\/th\u003e\n\u003ctd\u003eA 1\/4\" to 1\/2\" gap below the jacket is possible (Blaze)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupport\u003c\/th\u003e\n\u003ctd\u003eSelf-supporting ledge around the sides and back\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUse\u003c\/th\u003e\n\u003ctd\u003eRequired for installation in a combustible enclosure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003eLifetime against manufacturing defects (original purchaser, single-family home use)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cdiv class=\"mnk-kit\"\u003e\n\u003cdiv class=\"mnk-kit__col\"\u003e\n\u003ch3 id=\"whats-included\"\u003eWhat's included\u003c\/h3\u003e\n\u003cul class=\"mnk-included\"\u003e\n\u003cli\u003eOne stainless steel insulated jacket for the Blaze LTE 30-inch griddle (BLZ-GRIDDLE-IJ)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mnk-kit__col\"\u003e\n\u003ch3 id=\"sold-separately\"\u003eSold separately\u003c\/h3\u003e\n\u003cul class=\"mnk-optional\"\u003e\n\u003cli\u003e\u003ca href=\"\/products\/blaze-30-inch-built-in-griddle-sku-blz-griddle\"\u003eBlaze Premium LTE 30-inch built-in gas griddle (BLZ-GRIDDLE-LTE)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/blaze-cover-for-premium-lte-30-inch-built-in-gas-griddles-grdbicv\"\u003eCover for Premium LTE 30-inch built-in griddles (GRDBICV)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/blaze-6-x-14-stainless-steel-island-vent-panel-blz-island-vent\"\u003eStainless island vent panel (BLZ-ISLAND-VENT)\u003c\/a\u003e, for island venting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 id=\"installation\"\u003eInstallation planning\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCut the island opening for the jacket: 30-5\/8\" W x 25\" D x 12-3\/4\" H (a 1\/4\" to 1\/2\" gap below the jacket is possible). Set the jacket in, then lower the griddle into it with a second person.\u003c\/li\u003e\n\u003cli\u003eA licensed professional contractor should install the jacket, and a licensed gas professional should make every gas connection. Blaze prohibits a rubber gas line connected directly to the appliance inside the jacket, even one supplied with it: use a stainless steel flex line. Different fittings or a gas pipe extension may be needed so the line does not kink and no excess line is left inside the jacket.\u003c\/li\u003e\n\u003cli\u003eThe jacket protects the combustible structure below the cooking surface only. The appliance's own clearances above, behind and beside it still apply (see its manual).\u003c\/li\u003e\n\u003cli\u003eLeak-test every gas connection as the final step and correct any leak before use.\u003c\/li\u003e\n\u003cli\u003eGriddle requirements (BLZ-GRIDDLE-LTE manual): at least 6 feet between the countertop and any overhead construction, and never under unprotected combustible overhead construction; under overhead construction Blaze calls for a vent hood larger than the cooking area and rated at least 1,200 CFM (recommended even when the overhead is non-combustible); adequate island ventilation (low cross-ventilation for propane, high for natural gas); a plenum wall or a propane tank drawer if a propane cylinder is stored in the island; a 15-amp GFI-protected circuit for the lights.\u003c\/li\u003e\n\u003cli\u003eSide and back clearance figures differ between Blaze's griddle manuals, so take them from the manual shipped with your griddle; we have asked Blaze to confirm. A permit may be required for outdoor kitchen construction.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 id=\"warranty\"\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBlaze lifetime warranty against defects in manufacturing and workmanship, to the original purchaser, for products in ordinary single-family home use. The appliance you set in the jacket has its own warranty, shown on that product's page and in its manual; Blaze voids the appliance warranty when it is not installed by a qualified installer. Ask us and we will send the current Blaze warranty document before you order.\u003c\/p\u003e\n\n\u003ch3 id=\"manuals\"\u003eManuals and documents\u003c\/h3\u003e\n\u003cul class=\"mnk-docs\"\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/wp-content\/uploads\/Insulated-Jacket-Installation.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBlaze insulated jacket installation (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/wp-content\/uploads\/Blaze-Griddle-LTE-User-Manual.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBlaze Premium LTE 30-inch griddle manual, BLZ-GRIDDLE-LTE-LP\/NG (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/product\/blaze-insulated-jacket-gas-griddles\/\" target=\"_blank\" rel=\"noopener\"\u003eBlaze product page: Insulated Jacket for Gas Griddles\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 id=\"legal\"\u003eLegal disclaimers and warnings\u003c\/h3\u003e\n\u003cp class=\"mnk-legal\"\u003eProduct packaging, owners' manuals, installation instructions, and\/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product. WARNING: This product can expose you to chemicals including chromium (hexavalent compounds), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e\n","brand":"Blaze","offers":[{"title":"Default Title","offer_id":49149679206679,"sku":"BLZ-GRIDDLE-IJ","price":849.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1251\/8981\/files\/download_3_36657267-bd98-4dc9-8b68-79256447c0be.jpg?v=1718310724"},{"product_id":"blaze-insulated-jacket-for-26-inch-pizza-oven-blz-26-pzovn-ij","title":"Blaze Insulated Jacket for 26-Inch Pizza Oven - BLZ-26-PZOVN-IJ","description":"\u003ch2 id=\"description\" data-mnk-layout=\"1\"\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe Blaze BLZ-26-PZOVN-IJ is the stainless steel insulated jacket for the \u003ca href=\"\/products\/blaze-26-inch-built-in-outdoor-pizza-oven-w-rotisserie-blz-26-pzovn\"\u003eBlaze 26-inch built-in outdoor pizza oven (BLZ-26-PZOVN)\u003c\/a\u003e. Blaze requires it when the oven goes into an island built from combustible materials, such as a wood-framed outdoor kitchen: the jacket sits in the island opening and the oven drops into it, shielding the structure around it from the oven's heat.\u003c\/p\u003e\n\u003cp\u003eThe jacket measures 28-1\/2\" W x 26-3\/8\" D x 9-1\/8\" H and needs a cut-out of 26-3\/4\" W x 25-1\/16\" D x 8-3\/4\" H. A self-supporting ledge runs around the sides and back.\u003c\/p\u003e\n\u003cp\u003eBlaze's page names only the 26-inch built-in pizza oven for this jacket. If you have the \u003ca href=\"\/products\/blaze-26-inch-built-in-gas-outdoor-oven-w-rotating-pizza-stone-bluetooth-probes-blz-lte3ovn\"\u003eBlaze 26-inch LTE+ outdoor oven (BLZ-LTE3OVN)\u003c\/a\u003e, \u003ca href=\"\/pages\/contact-us\"\u003eask us\u003c\/a\u003e to confirm the fit with Blaze before you order. In a non-combustible island the oven needs no jacket; to use it on a counter or freestanding instead, see the \u003ca href=\"\/products\/blaze-countertop-sleeve-for-26-inch-pizza-oven-blz-26-pzovn-tbl\"\u003ecountertop sleeve (BLZ-26-PZOVN-TBL)\u003c\/a\u003e or the \u003ca href=\"\/products\/blaze-cart-for-26-inch-outdoor-oven-blz-26-pzovn-cart2\"\u003eoven cart (BLZ-26-PZOVN-CART2)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003ePlan before you order: the oven is sold separately, and the jacket does not change the oven's own clearances beside, behind or above it.\u003c\/p\u003e\n\u003ch2 id=\"features\"\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequired for combustible islands:\u003c\/strong\u003e Blaze requires the jacket to build the 26-inch pizza oven into an island made of combustible materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSized for one oven:\u003c\/strong\u003e made for the Blaze 26-inch built-in pizza oven; cut-out 26-3\/4\" W x 25-1\/16\" D x 8-3\/4\" H.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel construction:\u003c\/strong\u003e Blaze rates it as durable in outdoor conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-supporting ledge:\u003c\/strong\u003e runs around the sides and back so the jacket rests on the countertop opening.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime warranty:\u003c\/strong\u003e Blaze covers its insulated jackets against defects in manufacturing and workmanship for the original purchaser.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"specifications\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"mnk-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eBlaze\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003eBLZ-26-PZOVN-IJ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eType\u003c\/th\u003e\n\u003ctd\u003eInsulated jacket for built-in installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits (per Blaze)\u003c\/th\u003e\n\u003ctd\u003eBlaze 26-inch built-in pizza oven (BLZ-26-PZOVN-LP \/ BLZ-26-PZOVN-NG)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall width\u003c\/th\u003e\n\u003ctd\u003e28-1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall depth\u003c\/th\u003e\n\u003ctd\u003e26-3\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall height\u003c\/th\u003e\n\u003ctd\u003e9-1\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut-out width\u003c\/th\u003e\n\u003ctd\u003e26-3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut-out depth\u003c\/th\u003e\n\u003ctd\u003e25-1\/16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut-out height\u003c\/th\u003e\n\u003ctd\u003e8-3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eSelf-supporting ledge around the sides and back\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUse\u003c\/th\u003e\n\u003ctd\u003eRequired when the island is built from combustible materials\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003eLifetime, defects in manufacturing and workmanship (original purchaser, single-family home use)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cdiv class=\"mnk-kit\"\u003e\n\u003cdiv class=\"mnk-kit__col\"\u003e\n\u003ch3 id=\"whats-included\"\u003eWhat's included\u003c\/h3\u003e\n\u003cul class=\"mnk-included\"\u003e\n\u003cli\u003eStainless steel insulated jacket for the 26-inch built-in pizza oven\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBlaze publishes no packing list, hardware count or weight for this jacket. The oven is sold separately.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mnk-kit__col\"\u003e\n\u003ch3 id=\"sold-separately\"\u003eSold separately\u003c\/h3\u003e\n\u003cul class=\"mnk-optional\"\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/blaze-26-inch-built-in-outdoor-pizza-oven-w-rotisserie-blz-26-pzovn\"\u003eBlaze 26-inch built-in outdoor pizza oven (BLZ-26-PZOVN)\u003c\/a\u003e: the oven Blaze lists for this jacket.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/blaze-cover-for-26-inch-built-in-outdoor-pizza-oven-26pzovn-bicv\"\u003eBlaze built-in oven cover (26PZOVN-BICV)\u003c\/a\u003e: protects the built-in oven between uses.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/blaze-6-x-14-stainless-steel-island-vent-panel-blz-island-vent\"\u003eBlaze 6 x 14 stainless island vent panel (BLZ-ISLAND-VENT)\u003c\/a\u003e: a stainless cover for the island vents.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/blaze-20-inch-stainless-steel-roll-out-trash-propane-tank-drawer-blz-trlp-drw-h\"\u003eBlaze roll-out trash and propane tank drawer (BLZ-TRLP-DRW-H)\u003c\/a\u003e: an alternative to a plenum wall for a propane tank inside the island.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 id=\"installation\"\u003eInstallation planning\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCut the island opening to the jacket cut-out: 26-3\/4\" W x 25-1\/16\" D x 8-3\/4\" H.\u003c\/li\u003e\n\u003cli\u003eOven clearances (from the oven's installation guide; details on the \u003ca href=\"\/products\/blaze-26-inch-built-in-outdoor-pizza-oven-w-rotisserie-blz-26-pzovn\"\u003eBLZ-26-PZOVN page\u003c\/a\u003e): keep at least 14\" from combustible material at the sides and 5\" at the back, and at least 6 feet between the countertop and any overhead construction. Combustible overhead construction must be protected by a vent hood of at least 1,000 CFM that is larger than the cooking area.\u003c\/li\u003e\n\u003cli\u003eIsland venting: vent the cavity on both sides at upper and lower levels. Propane is heavier than air, so low vents matter most; natural gas rises, so high vents matter most. A propane cylinder inside the island needs a plenum wall or a propane tank drawer.\u003c\/li\u003e\n\u003cli\u003eThe oven needs a GFI-protected 15-amp circuit for its lights and controls, and a gas flex connector of at least 1\/2\" diameter with an accessible manual shut-off valve.\u003c\/li\u003e\n\u003cli\u003eA licensed professional contractor should install the jacket, and a licensed gas professional should make every gas connection (Blaze insulated jacket installation sheet).\u003c\/li\u003e\n\u003cli\u003eBlaze does not allow a rubber gas line connected directly to the appliance inside the jacket, even one supplied with it: use a stainless steel flex line. Different fittings or a pipe extension may be needed to avoid kinks and keep excess line out of the jacket.\u003c\/li\u003e\n\u003cli\u003eLeak-check every gas connection as the final step and correct any leak before use.\u003c\/li\u003e\n\u003cli\u003eThe jacket protects combustible material from the cooking surface down only. The oven manual's clearances beside, behind and above the oven still apply.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 id=\"warranty\"\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBlaze states that its insulated jackets are covered by a lifetime warranty against defects in manufacturing and workmanship. The warranty extends to the original purchaser and applies to products bought for ordinary single-family home use. Blaze's product page gives no further conditions or exclusions for the jacket; the oven you set in it carries its own warranty, set out in its manual. Register the product with Blaze after delivery.\u003c\/p\u003e\n\u003ch3 id=\"manuals\"\u003eManuals and documents\u003c\/h3\u003e\n\u003cul class=\"mnk-docs\"\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/product\/blaze-insulated-jacket-for-26-inch-pizza-oven\/\" target=\"_blank\" rel=\"noopener\"\u003eBlaze product page: Insulated Jacket for 26-Inch Pizza Oven\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/wp-content\/uploads\/Insulated-Jacket-Installation.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBlaze Insulated Jacket Installation sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/product\/blaze-26-inch-gas-outdoor-oven-with-rotisserie\/\" target=\"_blank\" rel=\"noopener\"\u003eBlaze product page: 26-Inch Gas Outdoor Oven With Rotisserie\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/support\/register-your-product\/\" target=\"_blank\" rel=\"noopener\"\u003eBlaze product registration\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 id=\"legal\"\u003eLegal disclaimers and warnings\u003c\/h3\u003e\n\u003cp class=\"mnk-legal\"\u003eProduct packaging, owners' manuals, installation instructions, and\/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product. WARNING: This product can expose you to chemicals including chromium (hexavalent compounds), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e\n","brand":"Blaze","offers":[{"title":"Default Title","offer_id":49149697425687,"sku":"BLZ-26-PZOVN-IJ","price":494.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1251\/8981\/files\/blz-26-pzovn-ij.jpg?v=1790665926"},{"product_id":"blaze-insulated-jacket-for-lte-pro-32-inch-4-burner-gas-grill-blz-4-ij2","title":"Blaze Insulated Jacket For LTE PRO 32-Inch 4-Burner Gas Grill - BLZ-4-IJ2","description":"\u003ch2 id=\"description\" data-mnk-layout=\"1\"\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe Blaze BLZ-4-IJ2 is the stainless steel insulated jacket for the \u003ca href=\"\/products\/blaze-lte-pro-32-inch-4-burner-built-in-gas-grill-w-digital-temperature-screen-blz-4ltepro\"\u003eBlaze LTE PRO 32-inch 4-burner built-in gas grill (BLZ-4LTEPRO)\u003c\/a\u003e. Blaze makes it for installing that grill in a combustible enclosure, such as a wood-framed outdoor kitchen or BBQ island: the jacket sits in the island opening and the grill head drops into it, shielding the surrounding structure from the grill's heat.\u003c\/p\u003e\n\u003cp\u003eThe jacket measures 34-3\/4\" W x 22-1\/2\" D x 10\" H and needs a cut-out of 33-3\/8\" W x 21-1\/4\" D x 10\" H. A self-supporting ledge runs around the sides and back. The LTE PRO grill manual says the grill must go in a non-combustible island or be installed with an insulated jacket.\u003c\/p\u003e\n\u003cp\u003eJackets are made for one grill size, so match the jacket to your grill. The LTE PRO 40-inch grill uses the \u003ca href=\"\/products\/blaze-insulated-jacket-for-lte-pro-40-inch-5-burner-gas-grill-blz-5-ij2\"\u003eBLZ-5-IJ2\u003c\/a\u003e; 32-inch Prelude LBM and Premium LTE grills use the \u003ca href=\"\/products\/blaze-insulated-jacket-for-32-inch-4-burner-gas-grills-blz-4-ij\"\u003eBLZ-4-IJ\u003c\/a\u003e, and the Professional LUX 44-inch uses the \u003ca href=\"\/products\/blaze-insulated-jacket-for-professional-lux-4-burner-gas-grills-blz-4pro-ij\"\u003eBLZ-4PRO-IJ\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003ePlan before you order: cut the island to the jacket's cut-out, not the grill's own cut-out (30-3\/4\" W x 21-1\/4\" D x 9-1\/2\" H without a jacket, per the LTE PRO manual). Keep the manual's 18\" clearance from combustible construction at the sides and back, and plan island venting, a gas shut-off and a GFCI-protected outlet for the grill's display and lights before the counter goes on.\u003c\/p\u003e\n\u003ch2 id=\"features\"\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequired for combustible islands:\u003c\/strong\u003e lets you build the LTE PRO 32-inch grill into a wood-framed or other combustible enclosure, as the grill manual requires.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSized for one grill:\u003c\/strong\u003e made for the LTE PRO 32-inch 4-burner (BLZ-4LTEPRO); cut-out 33-3\/8\" W x 21-1\/4\" D x 10\" H.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel construction:\u003c\/strong\u003e built for outdoor use and gives the island opening a finished stainless look.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-supporting ledge:\u003c\/strong\u003e runs around the sides and back so the jacket rests on the countertop opening.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime warranty:\u003c\/strong\u003e Blaze covers the jacket against defects in manufacturing and workmanship for the original purchaser.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"specifications\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"mnk-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eBlaze\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003eBLZ-4-IJ2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eType\u003c\/th\u003e\n\u003ctd\u003eInsulated grill jacket for built-in installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eBlaze LTE PRO 32-inch 4-burner built-in gas grill, BLZ-4LTEPRO-LP \/ BLZ-4LTEPRO-NG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall width\u003c\/th\u003e\n\u003ctd\u003e34-3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall depth\u003c\/th\u003e\n\u003ctd\u003e22-1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall height\u003c\/th\u003e\n\u003ctd\u003e10\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut-out width\u003c\/th\u003e\n\u003ctd\u003e33-3\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut-out depth\u003c\/th\u003e\n\u003ctd\u003e21-1\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut-out height\u003c\/th\u003e\n\u003ctd\u003e10\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut-out note\u003c\/th\u003e\n\u003ctd\u003e1\/4\" to 1\/2\" gap possible below the jacket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eSelf-supporting ledge around the sides and back\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUse\u003c\/th\u003e\n\u003ctd\u003eRequired when the island is built from combustible materials\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003eLifetime, defects in manufacturing and workmanship (original purchaser, single-family home use)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cdiv class=\"mnk-kit\"\u003e\n\u003cdiv class=\"mnk-kit__col\"\u003e\n\u003ch3 id=\"whats-included\"\u003eWhat's included\u003c\/h3\u003e\n\u003cul class=\"mnk-included\"\u003e\n\u003cli\u003eStainless steel insulated jacket for the BLZ-4LTEPRO\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBlaze publishes no packing list, hardware count or weight for this jacket. The grill is sold separately.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mnk-kit__col\"\u003e\n\u003ch3 id=\"sold-separately\"\u003eSold separately\u003c\/h3\u003e\n\u003cul class=\"mnk-optional\"\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/blaze-lte-pro-32-inch-4-burner-built-in-gas-grill-w-digital-temperature-screen-blz-4ltepro\"\u003eBlaze LTE PRO 32-inch built-in gas grill (BLZ-4LTEPRO)\u003c\/a\u003e: the grill this jacket is made for.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/blaze-insulated-jacket-for-professional-lux-power-burners-blz-propb-ij\"\u003eBlaze insulated jacket for Professional LUX and LTE PRO power burners (BLZ-PROPB-IJ)\u003c\/a\u003e: for a matching LTE PRO power burner in the same combustible island.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/blaze-6-x-14-stainless-steel-island-vent-panel-blz-island-vent\"\u003eBlaze 6 x 14 stainless island vent panel (BLZ-ISLAND-VENT)\u003c\/a\u003e: a stainless cover for the island vents the manual requires.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/blaze-insulated-jacket-for-lte-pro-40-inch-5-burner-gas-grill-blz-5-ij2\"\u003eBlaze insulated jacket for the LTE PRO 40-inch 5-burner grill (BLZ-5-IJ2)\u003c\/a\u003e: the other LTE PRO grill size.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 id=\"installation\"\u003eInstallation planning\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCut the island opening to the jacket cut-out: 33-3\/8\" W x 21-1\/4\" D x 10\" H. Blaze notes that a 1\/4\" to 1\/2\" gap is possible below the insulated jacket, so allow for it when you build the opening.\u003c\/li\u003e\n\u003cli\u003eWithout a jacket, the LTE PRO manual lists a 30-3\/4\" W x 21-1\/4\" D x 9-1\/2\" H cut-out for the BLZ-4LTEPRO; that figure applies only to non-combustible islands.\u003c\/li\u003e\n\u003cli\u003eLTE PRO grill manual: keep at least 18\" from combustible material at the sides and 18\" at the back, and 4\" from non-combustible construction. Never install the grill under combustible overhead construction; under a non-combustible overhead, keep 72\" and use a vent hood of at least 1,000 CFM that is larger than the cooking area.\u003c\/li\u003e\n\u003cli\u003eVent the island on both sides for your fuel: propane is heavier than air and needs low vents, natural gas rises and needs vents near the top (the manual places upper vents within 5\" of the island top).\u003c\/li\u003e\n\u003cli\u003eGas: the manual recommends a flex connector of at least 5\/8\" diameter and requires an installer-supplied shut-off valve in an accessible place.\u003c\/li\u003e\n\u003cli\u003eElectrical: the grill display and lights need a 15-amp outlet on a GFCI-protected breaker inside the island.\u003c\/li\u003e\n\u003cli\u003eA licensed professional contractor should install the jacket, and a licensed gas professional should make every gas connection (Blaze insulated jacket installation sheet).\u003c\/li\u003e\n\u003cli\u003eBlaze does not allow a rubber gas line connected directly to the appliance inside the jacket, even one supplied with it: use a stainless steel flex line. The appliance's fittings may not suit every installation, so different fittings or a pipe extension may be needed to avoid kinks and keep excess line out of the jacket.\u003c\/li\u003e\n\u003cli\u003eLeak-check every gas connection as the final step and correct any leak before use.\u003c\/li\u003e\n\u003cli\u003eThe jacket protects combustible material from the cooking surface down only. The appliance manual's clearances above, behind and beside the appliance still apply.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 id=\"warranty\"\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBlaze states that its insulated jackets are covered by a lifetime warranty against defects in manufacturing and workmanship. The warranty extends to the original purchaser and applies to products bought for ordinary single-family home use. Blaze's product page gives no further conditions or exclusions for the jacket; the grill you set in it carries its own warranty, set out in its manual. Register the product with Blaze after delivery.\u003c\/p\u003e\n\u003ch3 id=\"manuals\"\u003eManuals and documents\u003c\/h3\u003e\n\u003cul class=\"mnk-docs\"\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/product\/blaze-insulated-jackets-for-gas-grills\/\" target=\"_blank\" rel=\"noopener\"\u003eBlaze product page: Insulated Jackets for Gas Grills (all sizes)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/wp-content\/uploads\/Insulated-Jacket-Installation.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBlaze Insulated Jacket Installation sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/wp-content\/uploads\/BLZ-4LTEPRO-Manual.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBlaze LTE PRO 32-inch grill manual, BLZ-4LTEPRO (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/support\/register-your-product\/\" target=\"_blank\" rel=\"noopener\"\u003eBlaze product registration\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 id=\"legal\"\u003eLegal disclaimers and warnings\u003c\/h3\u003e\n\u003cp class=\"mnk-legal\"\u003eProduct packaging, owners' manuals, installation instructions, and\/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product. WARNING: This product can expose you to chemicals including chromium (hexavalent compounds), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e\n","brand":"Blaze","offers":[{"title":"Default Title","offer_id":67644292333847,"sku":"BLZ-4-IJ2","price":649.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1251\/8981\/files\/blaze-4-ij2-front.jpg?v=1791233809"},{"product_id":"blaze-insulated-jacket-for-lte-pro-40-inch-5-burner-gas-grill-blz-5-ij2","title":"Blaze Insulated Jacket For LTE PRO 40-Inch 5-Burner Gas Grill - BLZ-5-IJ2","description":"\u003ch2 id=\"description\" data-mnk-layout=\"1\"\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe Blaze BLZ-5-IJ2 is the stainless steel insulated jacket made for the Blaze \u003ca href=\"\/products\/blaze-lte-pro-40-inch-5-burner-built-in-gas-grill-w-digital-temperature-screen-rotisserie-blz-5ltepro\"\u003eLTE PRO 40-inch grill (BLZ-5LTEPRO)\u003c\/a\u003e. Blaze's LTE PRO manual makes a Blaze insulated jacket mandatory when the outdoor kitchen or island is built of combustible material, such as a wood frame, and offers it as extra protection for the surrounding construction in a non-combustible island. The jacket lines the grill opening and carries the grill on a self-supporting ledge around the sides and back.\u003c\/p\u003e\n\u003cp\u003eThe jacket measures 42\" W x 22-5\/8\" D x 10\" H and needs an island cut-out of 40-3\/8\" W x 21-1\/4\" D x 9-5\/8\" H. The grill's own cut-out without a jacket is 38\" W x 21-1\/4\" D x 9-1\/2\" H, so size the opening for the jacket when the island is combustible.\u003c\/p\u003e\n\u003cp\u003ePlan before you order: the grill is sold separately, and the jacket does not change the grill's clearances above, behind or beside it. It is sized for the LTE PRO 40-inch only. For the 32-inch LTE PRO, use the \u003ca href=\"\/products\/blaze-insulated-jacket-for-lte-pro-32-inch-4-burner-gas-grill-blz-4-ij2\"\u003eBLZ-4-IJ2\u003c\/a\u003e; for 40-inch Premium LTE and LTE+ grills, use the \u003ca href=\"\/products\/blaze-insulated-jacket-for-40-inch-5-burner-gas-grills-blz-5-ij\"\u003eBLZ-5-IJ\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2 id=\"features\"\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade for the LTE PRO 40-inch:\u003c\/strong\u003e the jacket Blaze lists for the BLZ-5LTEPRO 5-burner built-in grill.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequired for combustible islands:\u003c\/strong\u003e lets you build the grill into a wood-framed or other combustible enclosure, as the LTE PRO manual requires.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtra protection in masonry islands:\u003c\/strong\u003e Blaze notes the jacket may also be used in non-combustible structures to add protection for the surrounding construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-supporting ledge:\u003c\/strong\u003e a ledge around the sides and back supports the grill in the opening.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel construction:\u003c\/strong\u003e made for outdoor kitchens and backed by Blaze's lifetime warranty against manufacturing defects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"specifications\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"mnk-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eBlaze\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003eBLZ-5-IJ2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eType\u003c\/th\u003e\n\u003ctd\u003eInsulated jacket for a built-in gas grill; grill not included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits (per Blaze)\u003c\/th\u003e\n\u003ctd\u003eBlaze LTE PRO 40-Inch 5-Burner Gas Grill, BLZ-5LTEPRO-LP \/ BLZ-5LTEPRO-NG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot for\u003c\/th\u003e\n\u003ctd\u003ePremium LTE \/ LTE+ 40-inch (use BLZ-5-IJ) or LTE PRO 32-inch (use BLZ-4-IJ2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall size\u003c\/th\u003e\n\u003ctd\u003e42\" W x 22-5\/8\" D x 10\" H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eIsland cut-out for the jacket\u003c\/th\u003e\n\u003ctd\u003e40-3\/8\" W x 21-1\/4\" D x 9-5\/8\" H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut-out note\u003c\/th\u003e\n\u003ctd\u003eA 1\/4\" to 1\/2\" gap below the jacket is possible (Blaze)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eGrill cut-out without a jacket\u003c\/th\u003e\n\u003ctd\u003e38\" W x 21-1\/4\" D x 9-1\/2\" H (BLZ-5LTEPRO manual)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupport\u003c\/th\u003e\n\u003ctd\u003eSelf-supporting ledge around the sides and back\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUse\u003c\/th\u003e\n\u003ctd\u003eRequired for installation in a combustible enclosure; optional added protection in a non-combustible one\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003eLifetime against manufacturing defects (original purchaser, single-family home use)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cdiv class=\"mnk-kit\"\u003e\n\u003cdiv class=\"mnk-kit__col\"\u003e\n\u003ch3 id=\"whats-included\"\u003eWhat's included\u003c\/h3\u003e\n\u003cul class=\"mnk-included\"\u003e\n\u003cli\u003eOne stainless steel insulated jacket for the LTE PRO 40-inch grill (BLZ-5-IJ2)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mnk-kit__col\"\u003e\n\u003ch3 id=\"sold-separately\"\u003eSold separately\u003c\/h3\u003e\n\u003cul class=\"mnk-optional\"\u003e\n\u003cli\u003e\u003ca href=\"\/products\/blaze-lte-pro-40-inch-5-burner-built-in-gas-grill-w-digital-temperature-screen-rotisserie-blz-5ltepro\"\u003eLTE PRO 40-inch grill (BLZ-5LTEPRO)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/blaze-grill-cover-for-lte-pro-40-inch-5-burner-built-in-gas-grills-5lteprobicv\"\u003eLTE PRO 40-inch built-in grill cover (5LTEPROBICV)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/blaze-6-x-14-stainless-steel-island-vent-panel-blz-island-vent\"\u003eStainless island vent panel (BLZ-ISLAND-VENT)\u003c\/a\u003e, for island venting\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/blaze-insulated-jacket-for-lte-pro-40-inch-gas-griddle-blz-griddle40-ij\"\u003eLTE PRO 40-inch griddle insulated jacket (BLZ-GRIDDLE40-IJ)\u003c\/a\u003e, if you add the matching griddle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 id=\"installation\"\u003eInstallation planning\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCut the island opening for the jacket: 40-3\/8\" W x 21-1\/4\" D x 9-5\/8\" H (a 1\/4\" to 1\/2\" gap below the jacket is possible). Set the jacket in, then lower the grill into it with a second person. Allow 28\" of height for the grill's hood when open.\u003c\/li\u003e\n\u003cli\u003eA licensed professional contractor should install the jacket, and a licensed gas professional should make every gas connection. Blaze prohibits a rubber gas line connected directly to the appliance inside the jacket, even one supplied with it: use a stainless steel flex line. Different fittings or a gas pipe extension may be needed so the line does not kink and no excess line is left inside the jacket.\u003c\/li\u003e\n\u003cli\u003eThe jacket protects the combustible structure below the cooking surface only. The appliance's own clearances above, behind and beside it still apply (see its manual).\u003c\/li\u003e\n\u003cli\u003eLeak-test every gas connection as the final step and correct any leak before use.\u003c\/li\u003e\n\u003cli\u003eGrill clearances (LTE PRO manual): 18\" from combustible construction at the sides and back, 4\" from non-combustible construction at the sides; never under combustible overhead construction; under a non-combustible overhead, 72\" with a vent hood of at least 1,000 CFM, its fan bottom 36\" above the cooking surface. Cut a 1\" air gap in the front face of the countertop below the control panel.\u003c\/li\u003e\n\u003cli\u003eIsland vents on both sides: propane needs lower vents (bottom within 1\" of the island floor, top no more than 5\" up, at least 1\/2 sq. in. of free area per lb of stored fuel each); natural gas needs upper vents within 5\" of the island top (at least 1 sq. in. per lb each).\u003c\/li\u003e\n\u003cli\u003eThe grill's screen and lights need a 15-amp outlet on a GFCI-protected breaker inside the island. A permit may be required for outdoor kitchen construction.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 id=\"warranty\"\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBlaze lifetime warranty against defects in manufacturing and workmanship, to the original purchaser, for products in ordinary single-family home use. The appliance you set in the jacket has its own warranty, shown on that product's page and in its manual; Blaze voids the appliance warranty when it is not installed by a qualified installer. Ask us and we will send the current Blaze warranty document before you order.\u003c\/p\u003e\n\n\u003ch3 id=\"manuals\"\u003eManuals and documents\u003c\/h3\u003e\n\u003cul class=\"mnk-docs\"\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/wp-content\/uploads\/Insulated-Jacket-Installation.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBlaze insulated jacket installation (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/wp-content\/uploads\/BLZ-5LTEPRO-manual.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBlaze LTE PRO 40-inch grill product manual, BLZ-5LTEPRO (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/product\/blaze-insulated-jackets-for-gas-grills\/\" target=\"_blank\" rel=\"noopener\"\u003eBlaze product page: Insulated Jackets for Gas Grills\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 id=\"legal\"\u003eLegal disclaimers and warnings\u003c\/h3\u003e\n\u003cp class=\"mnk-legal\"\u003eProduct packaging, owners' manuals, installation instructions, and\/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product. WARNING: This product can expose you to chemicals including chromium (hexavalent compounds), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e\n","brand":"Blaze","offers":[{"title":"Default Title","offer_id":67644292497687,"sku":"BLZ-5-IJ2","price":749.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1251\/8981\/files\/blaze-5-ij2-front.jpg?v=1791233812"},{"product_id":"blaze-insulated-jacket-for-lte-30-inch-gas-griddle-blz-griddle-ij2","title":"Blaze Insulated Jacket For LTE+ 30-Inch Gas Griddle - BLZ-GRIDDLE-IJ2","description":"\u003ch2 id=\"description\" data-mnk-layout=\"1\"\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe Blaze BLZ-GRIDDLE-IJ2 is the stainless steel insulated jacket for the \u003ca href=\"\/products\/blaze-lte-30-inch-built-in-gas-griddle-blz-griddle-lte3\"\u003eBlaze LTE+ 30-inch built-in gas griddle (BLZ-GRIDDLE-LTE3)\u003c\/a\u003e. Blaze makes it for building that griddle into a combustible enclosure, such as a wood-framed outdoor kitchen or BBQ island: the jacket lines the island opening and the griddle drops into it, shielding the surrounding structure from heat.\u003c\/p\u003e\n\u003cp\u003eThe jacket measures 32-1\/2\" W x 26-1\/2\" D x 11-1\/2\" H, with a self-supporting ledge around the sides and back. Cut-out: 31\" W x 25-1\/4\" D x 11-1\/4\" H. The griddle manual says an insulated jacket is required whenever the outdoor kitchen is built from combustible materials.\u003c\/p\u003e\n\u003cp\u003eJackets are made for one griddle, so match the jacket to your model. Blaze lists the \u003ca href=\"\/products\/blaze-insulated-jacket-for-30-inch-gas-griddles-blz-griddle-ij\"\u003eBLZ-GRIDDLE-IJ\u003c\/a\u003e for its LTE (not LTE+) 30-inch griddle, and the LTE PRO 40-inch griddle uses the \u003ca href=\"\/products\/blaze-insulated-jacket-for-lte-pro-40-inch-gas-griddle-blz-griddle40-ij\"\u003eBLZ-GRIDDLE40-IJ\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003ePlan before you order: cut the island to the jacket's cut-out rather than the griddle's own, keep the manual's combustible clearances, and plan island vents, a gas shut-off and a 15-amp GFCI-protected circuit for the griddle.\u003c\/p\u003e\n\u003ch2 id=\"features\"\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequired for combustible islands:\u003c\/strong\u003e lets you build the LTE+ 30-inch griddle into a wood-framed or other combustible enclosure, as the griddle manual requires.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCut-out 31\" W x 25-1\/4\" D x 11-1\/4\" H:\u003c\/strong\u003e sized for the LTE+ 30-inch griddle (BLZ-GRIDDLE-LTE3).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel construction:\u003c\/strong\u003e built for outdoor use and gives the island opening a finished stainless look.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-supporting ledge:\u003c\/strong\u003e runs around the sides and back so the jacket rests on the countertop opening.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime warranty:\u003c\/strong\u003e Blaze covers the jacket against defects in manufacturing and workmanship for the original purchaser.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"specifications\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"mnk-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eBlaze\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003eBLZ-GRIDDLE-IJ2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eType\u003c\/th\u003e\n\u003ctd\u003eInsulated griddle jacket for built-in installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eBlaze LTE+ 30-inch built-in gas griddle, BLZ-GRIDDLE-LTE3-LP \/ BLZ-GRIDDLE-LTE3-NG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall width\u003c\/th\u003e\n\u003ctd\u003e32-1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall depth\u003c\/th\u003e\n\u003ctd\u003e26-1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall height\u003c\/th\u003e\n\u003ctd\u003e11-1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut-out width\u003c\/th\u003e\n\u003ctd\u003e31\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut-out depth\u003c\/th\u003e\n\u003ctd\u003e25-1\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut-out height\u003c\/th\u003e\n\u003ctd\u003e11-1\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut-out note\u003c\/th\u003e\n\u003ctd\u003e1\/4\" to 1\/2\" gap possible below the jacket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eSelf-supporting ledge around the sides and back\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUse\u003c\/th\u003e\n\u003ctd\u003eRequired when the island is built from combustible materials\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003eLifetime, defects in manufacturing and workmanship (original purchaser, single-family home use)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cdiv class=\"mnk-kit\"\u003e\n\u003cdiv class=\"mnk-kit__col\"\u003e\n\u003ch3 id=\"whats-included\"\u003eWhat's included\u003c\/h3\u003e\n\u003cul class=\"mnk-included\"\u003e\n\u003cli\u003eStainless steel insulated jacket for the LTE+ 30-inch griddle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBlaze publishes no packing list, hardware count or weight for this jacket. The griddle is sold separately.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mnk-kit__col\"\u003e\n\u003ch3 id=\"sold-separately\"\u003eSold separately\u003c\/h3\u003e\n\u003cul class=\"mnk-optional\"\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/blaze-lte-30-inch-built-in-gas-griddle-blz-griddle-lte3\"\u003eBlaze LTE+ 30-inch built-in gas griddle (BLZ-GRIDDLE-LTE3)\u003c\/a\u003e: the griddle this jacket is made for.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/blaze-6-x-14-stainless-steel-island-vent-panel-blz-island-vent\"\u003eBlaze 6 x 14 stainless island vent panel (BLZ-ISLAND-VENT)\u003c\/a\u003e: covers the island vent openings the griddle manual requires.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/blaze-insulated-jacket-for-lte-pro-40-inch-gas-griddle-blz-griddle40-ij\"\u003eBlaze insulated jacket for the LTE PRO 40-inch griddle (BLZ-GRIDDLE40-IJ)\u003c\/a\u003e: for the other current Blaze built-in griddle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 id=\"installation\"\u003eInstallation planning\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCut the island opening to the jacket cut-out: 31\" W x 25-1\/4\" D x 11-1\/4\" H. Blaze notes that a 1\/4\" to 1\/2\" gap is possible below the insulated jacket, so allow for it when you build the opening.\u003c\/li\u003e\n\u003cli\u003eGriddle manual: the griddle must go in a non-combustible enclosure, or be installed with an insulated jacket when the outdoor kitchen is built from combustible materials.\u003c\/li\u003e\n\u003cli\u003eGriddle manual: keep at least 18\" from combustible material at the sides and 18\" at the back (4\" at the back for non-combustible construction), and do not install under overhead combustible construction. The manual lists 72\" to overhead non-combustible construction with a vent hood.\u003c\/li\u003e\n\u003cli\u003eIsland vents: the griddle manual calls for upper and lower vents on both sides of the island. Upper vents sit 5\" from the top of the island to the bottom of the vent; lower vents sit within 1\" of the bottom of the island. Upper vents need at least 1 sq in per lb of stored fuel capacity and lower vents at least 1\/2 sq in per lb; every opening must admit a 1\/8\" rod and stay unobstructed.\u003c\/li\u003e\n\u003cli\u003eGas: the griddle manual recommends a flex connector of at least 5\/8\" diameter and requires an installer-supplied shut-off valve in an accessible place. Natural gas runs at 4\" water column and propane at 11\" water column through the regulator.\u003c\/li\u003e\n\u003cli\u003eElectrical: the griddle manual calls for a 15-amp breaker with GFI protection.\u003c\/li\u003e\n\u003cli\u003eBlaze's insulated jacket installation sheet: a licensed professional contractor should install the jacket, and a licensed gas professional should make all gas connections.\u003c\/li\u003e\n\u003cli\u003eDo not connect a rubber gas line directly to the appliance, even one supplied with it; Blaze calls for a stainless steel flex line. Pre-installed fittings may not suit every installation, so different fittings or pipe extensions may be needed to avoid kinks and keep excess line out of the jacket.\u003c\/li\u003e\n\u003cli\u003eCheck every gas connection for leaks as the final step.\u003c\/li\u003e\n\u003cli\u003eThe jacket protects only against combustible material from the cooking surface down. The appliance manual's clearances above, behind and beside the appliance still apply.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 id=\"warranty\"\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBlaze states that its insulated jackets are covered by a lifetime warranty against defects in manufacturing and workmanship. The warranty extends to the original purchaser and applies to products bought for ordinary single-family home use. Blaze's product page gives no further conditions or exclusions for the jacket; the griddle carries its own warranty, set out in its manual. Register the product with Blaze after delivery.\u003c\/p\u003e\n\u003ch3 id=\"manuals\"\u003eManuals and documents\u003c\/h3\u003e\n\u003cul class=\"mnk-docs\"\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/product\/blaze-insulated-jacket-gas-griddles\/\" target=\"_blank\" rel=\"noopener\"\u003eBlaze product page: Insulated Jacket for Gas Griddles (all sizes)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/wp-content\/uploads\/Insulated-Jacket-Installation.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBlaze Insulated Jacket Installation sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/wp-content\/uploads\/BLZ-GRIDDLE-LTE3-Manual-1.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBlaze LTE+ 30-inch gas griddle manual, BLZ-GRIDDLE-LTE3 (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/support\/register-your-product\/\" target=\"_blank\" rel=\"noopener\"\u003eBlaze product registration\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 id=\"legal\"\u003eLegal disclaimers and warnings\u003c\/h3\u003e\n\u003cp class=\"mnk-legal\"\u003eProduct packaging, owners' manuals, installation instructions, and\/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product. WARNING: This product can expose you to chemicals including chromium (hexavalent compounds), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e\n","brand":"Blaze","offers":[{"title":"Default Title","offer_id":67644292595991,"sku":"BLZ-GRIDDLE-IJ2","price":849.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1251\/8981\/files\/blaze-griddle-ij2-front.jpg?v=1791233814"},{"product_id":"blaze-insulated-jacket-for-lte-pro-40-inch-gas-griddle-blz-griddle40-ij","title":"Blaze Insulated Jacket For LTE PRO 40-Inch Gas Griddle - BLZ-GRIDDLE40-IJ","description":"\u003ch2 id=\"description\" data-mnk-layout=\"1\"\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe Blaze BLZ-GRIDDLE40-IJ is the stainless steel insulated jacket for the \u003ca href=\"\/products\/blaze-lte-pro-40-inch-built-in-gas-griddle-w-digital-temperature-screen-blz-griddle40\"\u003eBlaze LTE PRO 40-inch built-in gas griddle (BLZ-GRIDDLE40)\u003c\/a\u003e. Blaze makes it for building that griddle into a combustible enclosure, such as a wood-framed outdoor kitchen or BBQ island: the jacket lines the island opening and the griddle drops into it, shielding the surrounding structure from heat.\u003c\/p\u003e\n\u003cp\u003eThe jacket measures 41-3\/4\" W x 26-1\/2\" D x 11-1\/2\" H, with a self-supporting ledge around the sides and back. Cut-out depth is 25-1\/4\"; the cut-out width and height are pending confirmation from Blaze (see Installation planning). The griddle manual says an insulated jacket is required whenever the outdoor kitchen is built from combustible materials.\u003c\/p\u003e\n\u003cp\u003eJackets are made for one griddle, so match the jacket to your model. The LTE+ 30-inch griddle uses the \u003ca href=\"\/products\/blaze-insulated-jacket-for-lte-30-inch-gas-griddle-blz-griddle-ij2\"\u003eBLZ-GRIDDLE-IJ2\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003ePlan before you order: cut the island to the jacket's cut-out rather than the griddle's own, keep the manual's combustible clearances, and plan island vents, a gas shut-off and a 15-amp GFCI-protected circuit for the griddle.\u003c\/p\u003e\n\u003ch2 id=\"features\"\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequired for combustible islands:\u003c\/strong\u003e lets you build the LTE PRO 40-inch griddle into a wood-framed or other combustible enclosure, as the griddle manual requires.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall 41-3\/4\" W x 26-1\/2\" D x 11-1\/2\" H:\u003c\/strong\u003e sized for the 40-inch LTE PRO griddle; cut-out depth 25-1\/4\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel construction:\u003c\/strong\u003e built for outdoor use and gives the island opening a finished stainless look.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-supporting ledge:\u003c\/strong\u003e runs around the sides and back so the jacket rests on the countertop opening.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime warranty:\u003c\/strong\u003e Blaze covers the jacket against defects in manufacturing and workmanship for the original purchaser.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"specifications\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"mnk-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eBlaze\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003eBLZ-GRIDDLE40-IJ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eType\u003c\/th\u003e\n\u003ctd\u003eInsulated griddle jacket for built-in installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eBlaze LTE PRO 40-inch built-in gas griddle, BLZ-GRIDDLE40-LP \/ BLZ-GRIDDLE40-NG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall width\u003c\/th\u003e\n\u003ctd\u003e41-3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall depth\u003c\/th\u003e\n\u003ctd\u003e26-1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall height\u003c\/th\u003e\n\u003ctd\u003e11-1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut-out width\u003c\/th\u003e\n\u003ctd\u003eAwaiting Blaze confirmation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut-out depth\u003c\/th\u003e\n\u003ctd\u003e25-1\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut-out height\u003c\/th\u003e\n\u003ctd\u003eAwaiting Blaze confirmation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut-out note\u003c\/th\u003e\n\u003ctd\u003e1\/4\" to 1\/2\" gap possible below the jacket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eSelf-supporting ledge around the sides and back\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUse\u003c\/th\u003e\n\u003ctd\u003eRequired when the island is built from combustible materials\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003eLifetime, defects in manufacturing and workmanship (original purchaser, single-family home use)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cdiv class=\"mnk-kit\"\u003e\n\u003cdiv class=\"mnk-kit__col\"\u003e\n\u003ch3 id=\"whats-included\"\u003eWhat's included\u003c\/h3\u003e\n\u003cul class=\"mnk-included\"\u003e\n\u003cli\u003eStainless steel insulated jacket for the LTE PRO 40-inch griddle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBlaze publishes no packing list, hardware count or weight for this jacket. The griddle is sold separately.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mnk-kit__col\"\u003e\n\u003ch3 id=\"sold-separately\"\u003eSold separately\u003c\/h3\u003e\n\u003cul class=\"mnk-optional\"\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/blaze-lte-pro-40-inch-built-in-gas-griddle-w-digital-temperature-screen-blz-griddle40\"\u003eBlaze LTE PRO 40-inch built-in gas griddle (BLZ-GRIDDLE40)\u003c\/a\u003e: the griddle this jacket is made for.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/blaze-6-x-14-stainless-steel-island-vent-panel-blz-island-vent\"\u003eBlaze 6 x 14 stainless island vent panel (BLZ-ISLAND-VENT)\u003c\/a\u003e: covers the island vent openings the griddle manual requires.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/blaze-insulated-jacket-for-lte-30-inch-gas-griddle-blz-griddle-ij2\"\u003eBlaze insulated jacket for the LTE+ 30-inch griddle (BLZ-GRIDDLE-IJ2)\u003c\/a\u003e: for the other current Blaze built-in griddle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 id=\"installation\"\u003eInstallation planning\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBlaze's two product pages for this jacket give different cut-out widths and heights (40-1\/8\" W x 11-1\/4\" H on the griddle jacket page, 40-3\/4\" W x 11-1\/2\" H on the 40-inch jacket page); both give a 25-1\/4\" depth. Until Blaze confirms, check the cut-out with us before cutting. Blaze notes that a 1\/4\" to 1\/2\" gap is possible below the insulated jacket, so allow for it when you build the opening.\u003c\/li\u003e\n\u003cli\u003eGriddle manual: the griddle must go in a non-combustible enclosure, or be installed with an insulated jacket when the outdoor kitchen is built from combustible materials.\u003c\/li\u003e\n\u003cli\u003eGriddle manual: keep at least 18\" from combustible material at the sides and 18\" at the back, and do not install under overhead combustible construction. The manual lists 72\" to overhead non-combustible construction with a vent hood.\u003c\/li\u003e\n\u003cli\u003eIsland vents: the griddle manual calls for upper and lower vents on both sides of the island. Upper vents sit 5\" from the top of the island to the bottom of the vent; lower vents serve propane and upper vents natural gas. Upper vents need at least 1 sq in per lb of stored fuel capacity and lower vents at least 1\/2 sq in per lb; every opening must admit a 1\/8\" rod and stay unobstructed.\u003c\/li\u003e\n\u003cli\u003eGas: the griddle manual recommends a flex connector of at least 5\/8\" diameter and requires an installer-supplied shut-off valve in an accessible place. Natural gas runs at 4\" water column and propane at 11\" water column through the regulator.\u003c\/li\u003e\n\u003cli\u003eElectrical: the griddle manual calls for a 15-amp breaker with GFI protection.\u003c\/li\u003e\n\u003cli\u003eBlaze's insulated jacket installation sheet: a licensed professional contractor should install the jacket, and a licensed gas professional should make all gas connections.\u003c\/li\u003e\n\u003cli\u003eDo not connect a rubber gas line directly to the appliance, even one supplied with it; Blaze calls for a stainless steel flex line. Pre-installed fittings may not suit every installation, so different fittings or pipe extensions may be needed to avoid kinks and keep excess line out of the jacket.\u003c\/li\u003e\n\u003cli\u003eCheck every gas connection for leaks as the final step.\u003c\/li\u003e\n\u003cli\u003eThe jacket protects only against combustible material from the cooking surface down. The appliance manual's clearances above, behind and beside the appliance still apply.\u003c\/li\u003e\n\u003cli\u003eBlaze's 40-inch jacket page says some assembly is required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 id=\"warranty\"\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBlaze states that its insulated jackets are covered by a lifetime warranty against defects in manufacturing and workmanship. The warranty extends to the original purchaser and applies to products bought for ordinary single-family home use. Blaze's product page gives no further conditions or exclusions for the jacket; the griddle carries its own warranty, set out in its manual. Register the product with Blaze after delivery.\u003c\/p\u003e\n\u003ch3 id=\"manuals\"\u003eManuals and documents\u003c\/h3\u003e\n\u003cul class=\"mnk-docs\"\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/product\/blaze-insulated-jacket-gas-griddles\/\" target=\"_blank\" rel=\"noopener\"\u003eBlaze product page: Insulated Jacket for Gas Griddles (all sizes)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/blazegrills.com\/?p=115973\" target=\"_blank\" rel=\"noopener\"\u003eBlaze product page: Insulated Jacket for 40-Inch Gas Griddle (BLZ-GRIDDLE40-IJ)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/wp-content\/uploads\/Insulated-Jacket-Installation.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBlaze Insulated Jacket Installation sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/wp-content\/uploads\/BLZ-GRIDDLE40-manual-2.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBlaze LTE PRO 40-inch gas griddle manual, BLZ-GRIDDLE40 (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.blazegrills.com\/support\/register-your-product\/\" target=\"_blank\" rel=\"noopener\"\u003eBlaze product registration\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 id=\"legal\"\u003eLegal disclaimers and warnings\u003c\/h3\u003e\n\u003cp class=\"mnk-legal\"\u003eProduct packaging, owners' manuals, installation instructions, and\/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product. WARNING: This product can expose you to chemicals including chromium (hexavalent compounds), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e\n","brand":"Blaze","offers":[{"title":"Default Title","offer_id":67644292792599,"sku":"BLZ-GRIDDLE40-IJ","price":899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1251\/8981\/files\/blaze-griddle40-ij-front.jpg?v=1791233817"}],"url":"https:\/\/mnkgrills.com\/collections\/blaze-insulated-jackets.oembed","provider":"M\u0026K Grills","version":"1.0","type":"link"}