{"title":"Bromic Recessed \u0026 Flush-Mount Heaters","description":"\u003cp\u003eThese Bromic electric heaters can be recessed so the face sits flush with the ceiling. Recessing needs the matching Bromic recess kit, sold separately: the Platinum Electric and Platinum Electric Marine take a standard or low clearance kit sized to the heater's wattage, and the Tungsten Electric takes its own recess kit. See \u003ca href=\"\/collections\/bromic-heater-mounts\"\u003eBromic mounts and recess kits\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe same heaters can also go on a wall or ceiling bracket, or hang from a mounting pole. Bromic gas heaters cannot be recessed.\u003c\/p\u003e","products":[{"product_id":"bromic-platinum-smart-heat-electric-2300w-patio-heater","title":"Bromic Platinum Smart-Heat Electric 2300W Patio Heater - Black or White, 240V or 208V","description":"\u003ch2 id=\"description\" data-mnk-layout=\"1\"\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe Bromic Platinum Smart-Heat Electric 2300W is the smallest of Bromic's slim Platinum electric heaters: a 2300W radiant heater, 33.0 in. wide and 2.0 in. deep, with a brushed 304 stainless steel body and a Schott tinted glass-ceramic face. Bromic rates it for an area of up to 65 sq ft, enough to warm a single table, a bar counter or a seating nook under a covered patio, pergola or loggia.\u003c\/p\u003e\n\u003cp\u003eChoose 220-240V (BH0320003 black, BH0320007 white) or 208V (BH0320019 black, BH0320020 white) above to match your building's supply. It mounts on a wall or ceiling with the bracket supplied, hangs from a \u003ca href=\"\/products\/bromic-platinum-electric-tube-suspension-kit\"\u003etube suspension kit\u003c\/a\u003e, or sits flush in the ceiling with a \u003ca href=\"\/products\/bromic-platinum-electric-ceiling-recess-kit\"\u003eceiling recess kit\u003c\/a\u003e or \u003ca href=\"\/products\/bromic-platinum-electric-low-clearance-recess-kit\"\u003elow clearance recess kit\u003c\/a\u003e. Heat runs at full power from a \u003ca href=\"\/products\/bromic-manual-wall-switch-heater-kit\"\u003emanual wall switch\u003c\/a\u003e or an \u003ca href=\"\/products\/bromic-affinity-smart-heat-on-off-controller\"\u003eAffinity On\/Off controller\u003c\/a\u003e, or can be adjusted with an \u003ca href=\"\/products\/bromic-affinity-smart-heat-dimmer-controller\"\u003eAffinity Dimmer controller\u003c\/a\u003e (all sold separately). Bromic says the 304 stainless standard model is not suited to coastal or marine environments: near the sea, choose the \u003ca href=\"\/products\/bromic-platinum-smart-heat-electric-marine-2300w-patio-heater\"\u003ePlatinum Electric Marine 2300W\u003c\/a\u003e in 316 stainless. For a larger area, see the \u003ca href=\"\/products\/bromic-platinum-smart-heat-electric-3400w-patio-heater\"\u003ePlatinum Electric 3400W\u003c\/a\u003e or \u003ca href=\"\/products\/bromic-platinum-smart-heat-electric-4500w-patio-heater\"\u003e4500W\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003ePlan before ordering: the heater is hard-wired by a licensed technician, with a two-pole RCD and a bipolar circuit breaker upstream and a means of disconnection in the fixed wiring, because the heater has no switch. Mount it at least 72 in. above the floor on a wall or 96 in. on a ceiling, with 39.4 in. clear in front, in a covered position out of direct rain.\u003c\/p\u003e\n\u003cul class=\"mnk-glance\"\u003e\n\u003cli\u003e\n\u003cstrong class=\"mnk-glance__label\"\u003eOutput:\u003c\/strong\u003e 2300W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong class=\"mnk-glance__label\"\u003eHeat area:\u003c\/strong\u003e Up to 65 sq ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong class=\"mnk-glance__label\"\u003eVoltage:\u003c\/strong\u003e 220-240V or 208V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong class=\"mnk-glance__label\"\u003eSize:\u003c\/strong\u003e 33.0 x 7.0 x 2.0 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong class=\"mnk-glance__label\"\u003eBody:\u003c\/strong\u003e 304 stainless steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"features\"\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2300W for up to 65 sq ft:\u003c\/strong\u003e the smallest Platinum Electric size, to warm a single table, bar or seating nook from one fixture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully sealed 304 stainless body:\u003c\/strong\u003e a brushed stainless chassis for covered outdoor spaces away from the coast.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlim profile:\u003c\/strong\u003e 33.0 x 7.0 x 2.0 in. and 16.5 lb, so it sits close to a wall or ceiling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTinted glass-ceramic face:\u003c\/strong\u003e radiant heat with very little light from the element and a clean, flat front.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour ways to mount:\u003c\/strong\u003e wall, ceiling, tube suspension or recessed; the supplied bracket mounts straight or angled 30 degrees either way to aim the heat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAffinity control:\u003c\/strong\u003e full power from an Affinity On\/Off controller or wall switch, or adjustable heat with an Affinity Dimmer controller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo ventilation needed:\u003c\/strong\u003e an electric heater gives off no combustion byproducts, so it suits covered, enclosed-roof patios.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"specifications\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"mnk-specs\"\u003e\u003ctbody\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eIdentification\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eBromic Heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeries\u003c\/th\u003e\n\u003ctd\u003ePlatinum Smart-Heat Electric (Series II)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart numbers, 220-240V\u003c\/th\u003e\n\u003ctd\u003eBH0320003 (black), BH0320007 (white)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart numbers, 208V\u003c\/th\u003e\n\u003ctd\u003eBH0320019 (black), BH0320020 (white)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003ePerformance\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeat output\u003c\/th\u003e\n\u003ctd\u003e2300W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeat area\u003c\/th\u003e\n\u003ctd\u003eUp to 65 sq ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeat control\u003c\/th\u003e\n\u003ctd\u003eFull power (wall switch or Affinity On\/Off) or adjustable (Affinity Dimmer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eElectrical\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupply, 220-240V models\u003c\/th\u003e\n\u003ctd\u003e220-240V AC, 50\/60 Hz, 9.6 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupply, 208V models\u003c\/th\u003e\n\u003ctd\u003e208V AC, 50\/60 Hz, 11.1 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnection\u003c\/th\u003e\n\u003ctd\u003eHard-wired, grounded; no switch on the heater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUpstream protection\u003c\/th\u003e\n\u003ctd\u003eTwo-pole RCD or RCCB, plus a bipolar circuit breaker with at least 3 mm (1\/8 in.) contact opening\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOutdoor conduit fittings\u003c\/th\u003e\n\u003ctd\u003eIP44 or better\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eSize and build\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions (W x H x D)\u003c\/th\u003e\n\u003ctd\u003e33.0 x 7.0 x 2.0 in. (840 x 182 x 54 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e16.5 lb (7.5 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eBrushed 304 stainless steel, fully sealed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFace\u003c\/th\u003e\n\u003ctd\u003eSchott tinted glass-ceramic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColors\u003c\/th\u003e\n\u003ctd\u003eBlack or white\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eClearances\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMinimum height, wall mount\u003c\/th\u003e\n\u003ctd\u003e72 in. above the floor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMinimum height, ceiling mount\u003c\/th\u003e\n\u003ctd\u003e96 in. above the floor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eIn front of the heater\u003c\/th\u003e\n\u003ctd\u003e39.4 in. (1,000 mm) clear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCombustible materials\u003c\/th\u003e\n\u003ctd\u003e3 ft (1 m) from the front; keep them clear of the sides and rear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBetween heaters\u003c\/th\u003e\n\u003ctd\u003e20 in. (500 mm), edge to edge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBasis\u003c\/th\u003e\n\u003ctd\u003eSurface temperature of 149°F above room temperature\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eRecessed mounting\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeight above heater, standard recess kit\u003c\/th\u003e\n\u003ctd\u003e10 in. minimum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeight above heater, low clearance kit\u003c\/th\u003e\n\u003ctd\u003e7.1 in. (180 mm) minimum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLow clearance kit cut-out\u003c\/th\u003e\n\u003ctd\u003e995 x 240 mm (39.2 x 9.4 in.), between joists at least 240 mm (9.4 in.) apart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeater surface to floor\u003c\/th\u003e\n\u003ctd\u003e2,400 mm (94 in.) minimum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRecess to nearest wall\u003c\/th\u003e\n\u003ctd\u003e20 in. (500 mm) on all sides\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCeiling thickness\u003c\/th\u003e\n\u003ctd\u003e0.4 to 1.2 in. (10-30 mm); thicker ceilings: ask Bromic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eCompliance and use\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eListing\u003c\/th\u003e\n\u003ctd\u003eIntertek ETL \/ cETL 5001799\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControls\u003c\/th\u003e\n\u003ctd\u003eAffinity On\/Off, Affinity Dimmer, manual wall switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUse\u003c\/th\u003e\n\u003ctd\u003eCovered outdoor areas; not for coastal or marine use (choose the Marine version)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cdiv class=\"mnk-kit\"\u003e\n\u003cdiv class=\"mnk-kit__col\"\u003e\n\u003ch3 id=\"whats-included\"\u003eWhat's included\u003c\/h3\u003e\n\u003cul class=\"mnk-included\"\u003e\n\u003cli\u003ePlatinum Smart-Heat Electric 2300W heater\u003c\/li\u003e\n\u003cli\u003ePlug-in wall and ceiling mounting bracket, for straight mounting or 30 degrees either way\u003c\/li\u003e\n\u003cli\u003eM6 x 14 mm mounting screws and M3 x 10 mm positioning screws\u003c\/li\u003e\n\u003cli\u003eExtra cable gland and metal gland nut\u003c\/li\u003e\n\u003cli\u003eSmaller and larger bracket covers, straight and angled, to match the mounting position\u003c\/li\u003e\n\u003cli\u003eInstallation, instruction and service manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot included: fasteners into the wall or ceiling structure, controls, and recess or suspension kits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mnk-kit__col\"\u003e\n\u003ch3 id=\"sold-separately\"\u003eSold separately\u003c\/h3\u003e\n\u003cul class=\"mnk-optional\"\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-platinum-electric-ceiling-recess-kit\"\u003eCeiling recess kit\u003c\/a\u003e, 2300W size (BH3130017): flush mount where there is at least 10 in. above the heater\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-platinum-electric-low-clearance-recess-kit\"\u003eLow clearance recess kit\u003c\/a\u003e, 2300W size (BH3623009-1): flush mount in a cavity as shallow as 7.1 in., with its own cooling fan\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-platinum-electric-tube-suspension-kit\"\u003eTube suspension kit\u003c\/a\u003e, 2300W\/3400W size, 600 mm (BH3130023-1) or 1200 mm (BH3130024-1): ceiling mounting only, with its own ceiling bracket\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-affinity-smart-heat-on-off-controller\"\u003eAffinity Smart-Heat On\/Off controller\u003c\/a\u003e: full-power on\/off control\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-affinity-smart-heat-dimmer-controller\"\u003eAffinity Smart-Heat Dimmer controller\u003c\/a\u003e: adjustable heat\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bromic-affinity-smart-heat-expansion-board\"\u003eAffinity Smart-Heat expansion board (BH3130070)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bromic-manual-wall-switch-heater-kit\"\u003eManual wall switch kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 id=\"installation\"\u003eInstallation planning\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstaller:\u003c\/strong\u003e permanent installation and hard-wiring by a licensed, authorized technician, to local electrical codes. The heater must be off and cooled for at least 2 hours before handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e connect to a properly grounded supply (220-240V or 208V; check the rating label). Fit a two-pole RCD or RCCB and a bipolar circuit breaker with at least 3 mm contact opening upstream, and build a means of disconnection into the fixed wiring. Use outdoor conduit fittings rated IP44 or better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e not directly below or in front of an electrical socket, and away from bathtubs, showers and pools. Not for wardrobes, recreational vehicles, explosive atmospheres or small occupied rooms without supervision. Never point it at the ceiling or at flammable materials, cover it, paint it or alter it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather:\u003c\/strong\u003e do not install it where rain or water can reach the heater; mount it under cover. Near the coast, use the Marine version.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecessing:\u003c\/strong\u003e the standard recess kit needs at least 10 in. above the heater; with less height, use the low clearance kit (7.1 in.). The heater surface must be at least 2,400 mm above the floor and 20 in. from the nearest wall, in a ceiling 0.4 to 1.2 in. thick. Do not cut or notch joists, beams or rafters, never cover the heater with insulation, and protect it from water from above. With the low clearance kit the 2300W assembly weighs 41 lb (18.5 kg), and the installer confirms the structure can carry it; the kit's fan needs a constant, unswitched supply.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube suspension:\u003c\/strong\u003e ceiling mounting only, never on a wall; the kit uses its own ceiling bracket instead of the supplied one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFire sprinklers:\u003c\/strong\u003e never use ethylene or propylene glycol in a sprinkler system where heaters are present, keep sprinklers far enough from the heater to avoid accidental activation, and consult a fire sprinkler professional where both are present.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCare:\u003c\/strong\u003e Inspect and clean the heater body and its mounting at least once a month, more often in coastal or harsh conditions. Switch off and let the heater cool for at least 2 hours, then wipe it with a soft, damp cloth; never use a steam cleaner. Bromic asks for an inspection before use and a service by a licensed technician at least once a year, including a check of the RCD and circuit breaker.\u003c\/p\u003e\n\u003ch3 id=\"warranty\"\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBromic covers the Platinum Electric heater for 3 years from the date of purchase. Coverage is for the original owner only: Bromic or its agent supplies a replacement heater or a replacement for the failed part. The owner pays for labor to service, remove and reinstall the heater, shipping to and from the distributor, handling and administrative charges, and any materials or permits needed to install the replacement. Implied warranties are limited to one year.\u003c\/p\u003e\n\u003cp\u003eStart a claim with the dealer who sold you the heater; keep your proof of purchase.\u003c\/p\u003e\n\u003ch3 id=\"manuals\"\u003eManuals and documents\u003c\/h3\u003e\n\u003cul class=\"mnk-docs\"\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/pim.bromic.com\/wp-content\/uploads\/2026\/01\/Product-Cut-Sheet-Platinum-Electric-Marine.pdf\" target=\"_blank\" rel=\"noopener\"\u003ePlatinum Smart-Heat Electric and Marine cut sheet (PDF)\u003c\/a\u003e \u003cspan class=\"mnk-docs__meta\"\u003ePart numbers, heat areas, weights, current, mounting heights, recess heights\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/pim.bromic.com\/wp-content\/uploads\/2021\/07\/Bromic-Platinum-Smart-Heat-Electric-SII-Instruction-Manual-US_v4.pdf\" target=\"_blank\" rel=\"noopener\"\u003ePlatinum Smart-Heat Electric Series II 2300W\/3400W installation, instruction and service manual, US version 4 (PDF)\u003c\/a\u003e \u003cspan class=\"mnk-docs__meta\"\u003ePart numbers, electrical data, clearances, bracket, recess and tube mounting, wiring, care\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/pim.bromic.com\/wp-content\/uploads\/2025\/12\/Bromic-Platinum-Electric-Low-Clearance-Recess-Kit-Manual-EN.pdf\" target=\"_blank\" rel=\"noopener\"\u003ePlatinum Smart-Heat Electric Low Clearance Ceiling Recess installation instructions, REV10 (PDF)\u003c\/a\u003e \u003cspan class=\"mnk-docs__meta\"\u003eCut-outs, cavity, assembly weights, fan power, heater fitting\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.bromic.com\/product\/platinum-smart-heat-electric\/\" target=\"_blank\" rel=\"noopener\"\u003eBromic Platinum Smart-Heat Electric product page\u003c\/a\u003e \u003cspan class=\"mnk-docs__meta\"\u003eModels, materials, mounting, controls, FAQ\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.bromic.com\/warranty\/\" target=\"_blank\" rel=\"noopener\"\u003eBromic warranty terms\u003c\/a\u003e \u003cspan class=\"mnk-docs__meta\"\u003eWarranty periods by product line\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 id=\"legal\"\u003eLegal disclaimers and warnings\u003c\/h3\u003e\n\u003cp class=\"mnk-legal\"\u003eProduct packaging, owners' manuals, installation instructions, and\/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product.\u003c\/p\u003e\n\u003cp class=\"mnk-legal\"\u003eWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003c\/p\u003e\n","brand":"Bromic Heating","offers":[{"title":"240V \/ Black","offer_id":68167507509527,"sku":"BH0320003","price":1527.0,"currency_code":"USD","in_stock":true},{"title":"240V \/ White","offer_id":68167507542295,"sku":"BH0320007","price":1658.0,"currency_code":"USD","in_stock":true},{"title":"208V \/ Black","offer_id":68167507575063,"sku":"BH0320019","price":1527.0,"currency_code":"USD","in_stock":true},{"title":"208V \/ White","offer_id":68167507607831,"sku":"BH0320020","price":1658.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1251\/8981\/files\/bromic-platinum-smart-heat-electric-2300w-patio-heater-bh0320003-bh0320007-bh0320019-and-others.jpg?v=1794343422"},{"product_id":"bromic-platinum-smart-heat-electric-3400w-patio-heater","title":"Bromic Platinum Smart-Heat Electric 3400W Patio Heater - Black or White, 240V or 208V","description":"\u003ch2 id=\"description\" data-mnk-layout=\"1\"\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe Bromic Platinum Smart-Heat Electric 3400W is the middle size of Bromic's slim Platinum electric heaters: a 3400W radiant heater, 50.2 in. wide and 2.0 in. deep, with a brushed 304 stainless steel body and a tinted glass-ceramic face. Bromic rates it for an area of up to 108 sq ft, enough to warm a seating or dining area under a covered patio, pergola or loggia.\u003c\/p\u003e\n\u003cp\u003eChoose 220-240V (BH0320005 black, BH0320008 white) or 208V (BH0320021 black, BH0320022 white) above to match your building's supply. It mounts on a wall or ceiling with the bracket supplied, hangs from a \u003ca href=\"\/products\/bromic-platinum-electric-tube-suspension-kit\"\u003etube suspension kit\u003c\/a\u003e, or sits flush in the ceiling with a \u003ca href=\"\/products\/bromic-platinum-electric-ceiling-recess-kit\"\u003eceiling recess kit\u003c\/a\u003e or \u003ca href=\"\/products\/bromic-platinum-electric-low-clearance-recess-kit\"\u003elow clearance recess kit\u003c\/a\u003e. Heat runs at full power from a \u003ca href=\"\/products\/bromic-manual-wall-switch-heater-kit\"\u003emanual wall switch\u003c\/a\u003e or an \u003ca href=\"\/products\/bromic-affinity-smart-heat-on-off-controller\"\u003eAffinity On\/Off controller\u003c\/a\u003e, or can be adjusted with an \u003ca href=\"\/products\/bromic-affinity-smart-heat-dimmer-controller\"\u003eAffinity Dimmer controller\u003c\/a\u003e (all sold separately). Bromic says the 304 stainless standard model is not suited to marine use: near the sea, choose the \u003ca href=\"\/products\/bromic-platinum-smart-heat-electric-marine-3400w-patio-heater\"\u003ePlatinum Electric Marine 3400W\u003c\/a\u003e in 316 stainless. For a larger area, see the \u003ca href=\"\/products\/bromic-platinum-smart-heat-electric-4500w-patio-heater\"\u003ePlatinum Electric 4500W\u003c\/a\u003e; for a smaller one, the \u003ca href=\"\/products\/bromic-platinum-smart-heat-electric-2300w-patio-heater\"\u003e2300W\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003ePlan before ordering: the heater is hard-wired by a licensed technician, with a two-pole RCD and a bipolar circuit breaker upstream and a means of disconnection in the fixed wiring, because the heater has no switch. Mount it at least 72 in. above the floor on a wall or 96 in. on a ceiling, with 39.4 in. clear in front, in a covered position out of direct rain.\u003c\/p\u003e\n\u003cul class=\"mnk-glance\"\u003e\n\u003cli\u003e\n\u003cstrong class=\"mnk-glance__label\"\u003eOutput:\u003c\/strong\u003e 3400W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong class=\"mnk-glance__label\"\u003eHeat area:\u003c\/strong\u003e Up to 108 sq ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong class=\"mnk-glance__label\"\u003eVoltage:\u003c\/strong\u003e 220-240V or 208V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong class=\"mnk-glance__label\"\u003eSize:\u003c\/strong\u003e 50.2 x 7.0 x 2.0 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong class=\"mnk-glance__label\"\u003eBody:\u003c\/strong\u003e 304 stainless steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"features\"\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3400W for up to 108 sq ft:\u003c\/strong\u003e the middle Platinum Electric size, between the 2300W and 4500W, for a seating or dining area under cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully sealed 304 stainless body:\u003c\/strong\u003e a brushed stainless chassis for covered outdoor spaces away from the coast.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlim profile:\u003c\/strong\u003e 50.2 x 7.0 x 2.0 in. and 22 lb, so it sits close to a wall or ceiling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTinted glass-ceramic face:\u003c\/strong\u003e radiant heat with very little light from the element and a clean, flat front.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour ways to mount:\u003c\/strong\u003e wall, ceiling, tube suspension or recessed; the supplied bracket mounts straight or angled 30 degrees either way to aim the heat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAffinity control:\u003c\/strong\u003e full power from an Affinity On\/Off controller or wall switch, or adjustable heat with an Affinity Dimmer controller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo ventilation needed:\u003c\/strong\u003e an electric heater gives off no combustion byproducts, so it suits covered, enclosed-roof patios.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"specifications\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"mnk-specs\"\u003e\u003ctbody\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eIdentification\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eBromic Heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeries\u003c\/th\u003e\n\u003ctd\u003ePlatinum Smart-Heat Electric (Series II)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart numbers, 220-240V\u003c\/th\u003e\n\u003ctd\u003eBH0320005 (black), BH0320008 (white)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart numbers, 208V\u003c\/th\u003e\n\u003ctd\u003eBH0320021 (black), BH0320022 (white)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003ePerformance\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeat output\u003c\/th\u003e\n\u003ctd\u003e3400W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeat area\u003c\/th\u003e\n\u003ctd\u003eUp to 108 sq ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeat control\u003c\/th\u003e\n\u003ctd\u003eFull power (wall switch or Affinity On\/Off) or adjustable (Affinity Dimmer); no room thermostat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eElectrical\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupply, 220-240V models\u003c\/th\u003e\n\u003ctd\u003e220-240V AC, 50\/60 Hz, 14.2 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupply, 208V models\u003c\/th\u003e\n\u003ctd\u003e208V AC, 50\/60 Hz, 16.3 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnection\u003c\/th\u003e\n\u003ctd\u003eHard-wired, grounded; no switch on the heater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUpstream protection\u003c\/th\u003e\n\u003ctd\u003eTwo-pole RCD or RCCB, plus a bipolar circuit breaker with at least 3 mm (1\/8 in.) contact opening\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOutdoor conduit fittings\u003c\/th\u003e\n\u003ctd\u003eIP44 or better\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eSize and build\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions (W x H x D)\u003c\/th\u003e\n\u003ctd\u003e50.2 x 7.0 x 2.0 in. (1275 x 182 x 54 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e22 lb (10 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eBrushed 304 stainless steel, fully sealed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFace\u003c\/th\u003e\n\u003ctd\u003eTinted glass-ceramic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColors\u003c\/th\u003e\n\u003ctd\u003eBlack or white\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eClearances\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMinimum height, wall mount\u003c\/th\u003e\n\u003ctd\u003e72 in. above the floor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMinimum height, ceiling mount\u003c\/th\u003e\n\u003ctd\u003e96 in. above the floor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eIn front of the heater\u003c\/th\u003e\n\u003ctd\u003e39.4 in. (1,000 mm) clear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCombustible materials\u003c\/th\u003e\n\u003ctd\u003e3 ft (1 m) from the front; keep them clear of the sides and rear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBetween heaters\u003c\/th\u003e\n\u003ctd\u003e20 in. (500 mm), from the heater edge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBasis\u003c\/th\u003e\n\u003ctd\u003eSurface temperature of 149°F above room temperature\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eRecessed mounting\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeight above heater, standard recess kit\u003c\/th\u003e\n\u003ctd\u003e10 in. minimum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeight above heater, low clearance kit\u003c\/th\u003e\n\u003ctd\u003e7.1 in. (180 mm) minimum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLow clearance kit cut-out\u003c\/th\u003e\n\u003ctd\u003e1430 x 240 mm (56.3 x 9.4 in.), between joists 240 mm (9.4 in.) apart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeater surface to floor\u003c\/th\u003e\n\u003ctd\u003e2,400 mm (94 in.) minimum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRecess to nearest wall\u003c\/th\u003e\n\u003ctd\u003e20 in. (500 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCeiling thickness\u003c\/th\u003e\n\u003ctd\u003e0.4 to 1.2 in. (10-30 mm); thicker ceilings: ask Bromic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eCompliance and use\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eListing\u003c\/th\u003e\n\u003ctd\u003eIntertek ETL \/ cETL 5001799\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControls\u003c\/th\u003e\n\u003ctd\u003eAffinity On\/Off, Affinity Dimmer, manual wall switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUse\u003c\/th\u003e\n\u003ctd\u003eCovered outdoor areas; not for marine use (choose the Marine version)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cdiv class=\"mnk-kit\"\u003e\n\u003cdiv class=\"mnk-kit__col\"\u003e\n\u003ch3 id=\"whats-included\"\u003eWhat's included\u003c\/h3\u003e\n\u003cul class=\"mnk-included\"\u003e\n\u003cli\u003ePlatinum Smart-Heat Electric 3400W heater\u003c\/li\u003e\n\u003cli\u003eWall and ceiling mounting bracket, for straight mounting or 30 degrees either way\u003c\/li\u003e\n\u003cli\u003eM6 x 14 mm mounting screws and M3 x 10 mm positioning screws\u003c\/li\u003e\n\u003cli\u003eCable gland and nut\u003c\/li\u003e\n\u003cli\u003eSmaller and larger bracket covers, straight and angled, and an end cap\u003c\/li\u003e\n\u003cli\u003eInstallation, instruction and service manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot included: fasteners into the wall or ceiling structure, controls, and recess or suspension kits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mnk-kit__col\"\u003e\n\u003ch3 id=\"sold-separately\"\u003eSold separately\u003c\/h3\u003e\n\u003cul class=\"mnk-optional\"\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-platinum-electric-ceiling-recess-kit\"\u003eCeiling recess kit\u003c\/a\u003e, 3400W size (BH3130027): flush mount where there is at least 10 in. above the heater\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-platinum-electric-low-clearance-recess-kit\"\u003eLow clearance recess kit\u003c\/a\u003e, 3400W size (BH3623008-1): flush mount in a cavity as shallow as 7.1 in., with its own cooling fan\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-platinum-electric-tube-suspension-kit\"\u003eTube suspension kit\u003c\/a\u003e, 2300W\/3400W size, 600 mm (BH3130023-1) or 1200 mm (BH3130024-1): ceiling mounting only, with its own ceiling bracket\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-affinity-smart-heat-on-off-controller\"\u003eAffinity Smart-Heat On\/Off controller\u003c\/a\u003e: full-power on\/off control\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-affinity-smart-heat-dimmer-controller\"\u003eAffinity Smart-Heat Dimmer controller\u003c\/a\u003e: adjustable heat\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bromic-affinity-smart-heat-expansion-board\"\u003eAffinity Smart-Heat expansion board (BH3130070)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bromic-manual-wall-switch-heater-kit\"\u003eManual wall switch kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 id=\"installation\"\u003eInstallation planning\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstaller:\u003c\/strong\u003e permanent installation and hard-wiring by a licensed, authorized technician, to local codes. The heater must be off and cooled for at least 2 hours before handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e connect to a properly grounded supply (220-240V or 208V; check the rating label). Fit a two-pole RCD or RCCB and a bipolar circuit breaker with at least 3 mm contact opening upstream, and build a means of disconnection into the fixed wiring. Use outdoor conduit fittings rated IP44 or better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e not directly in line with an electrical socket, and away from bathtubs, showers and pools. Not for wardrobes, recreational vehicles or small occupied rooms without supervision. Never cover the heater, paint it or alter it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather:\u003c\/strong\u003e do not expose the heater directly to rain or water; mount it under cover. Near the coast, use the Marine version.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecessing:\u003c\/strong\u003e the standard recess kit needs at least 10 in. above the heater; with less height, use the low clearance kit (7.1 in.). The heater surface must be at least 2,400 mm above the floor and 20 in. from the nearest wall, in a ceiling 0.4 to 1.2 in. thick. Do not cut or notch joists, beams or rafters; the installer confirms the ceiling structure can carry the heater and kit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube suspension:\u003c\/strong\u003e ceiling mounting only, never on a wall; the kit uses its own ceiling bracket instead of the supplied one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFire sprinklers:\u003c\/strong\u003e never use ethylene or propylene glycol in a sprinkler system where heaters are present, keep sprinklers a safe distance from the heater, and consult a fire sprinkler professional where both are present.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCare:\u003c\/strong\u003e Inspect and clean the heater body and its mounting at least once a month. Switch off and let the heater cool for at least 2 hours, then wipe it with a soft, damp cloth; never use a steam cleaner. Bromic asks for an inspection and service by a licensed technician at least once a year, including a check of the RCD and circuit breaker.\u003c\/p\u003e\n\u003ch3 id=\"warranty\"\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBromic covers the Platinum Electric heater for 3 years from the date of purchase. Coverage is for the original owner only: Bromic or its agent supplies a replacement heater or a replacement for the failed part. The owner pays for labor to service, remove and reinstall the heater, shipping to and from the distributor, handling and administrative charges, and any materials or permits needed to install the replacement. Implied warranties are limited to one year.\u003c\/p\u003e\n\u003cp\u003eStart a claim with the dealer who sold you the heater; keep your proof of purchase.\u003c\/p\u003e\n\u003ch3 id=\"manuals\"\u003eManuals and documents\u003c\/h3\u003e\n\u003cul class=\"mnk-docs\"\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/pim.bromic.com\/wp-content\/uploads\/2026\/01\/Product-Cut-Sheet-Platinum-Electric-Marine.pdf\" target=\"_blank\" rel=\"noopener\"\u003ePlatinum Smart-Heat Electric and Marine cut sheet (PDF)\u003c\/a\u003e \u003cspan class=\"mnk-docs__meta\"\u003ePart numbers, heat areas, weights, current, mounting heights, recess heights\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/pim.bromic.com\/wp-content\/uploads\/2021\/07\/Bromic-Platinum-Smart-Heat-Electric-SII-Instruction-Manual-US_v4.pdf\" target=\"_blank\" rel=\"noopener\"\u003ePlatinum Smart-Heat Electric Series II 2300W\/3400W installation, instruction and service manual, US version 4 (PDF)\u003c\/a\u003e \u003cspan class=\"mnk-docs__meta\"\u003ePart numbers, electrical data, clearances, bracket, recess and tube mounting, wiring, care\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/pim.bromic.com\/wp-content\/uploads\/2025\/12\/Bromic-Platinum-Electric-Low-Clearance-Recess-Kit-Manual-EN.pdf\" target=\"_blank\" rel=\"noopener\"\u003ePlatinum Smart-Heat Electric Low Clearance Ceiling Recess installation instructions, REV10 (PDF)\u003c\/a\u003e \u003cspan class=\"mnk-docs__meta\"\u003eCut-outs, cavity, fan power, heater fitting\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.bromic.com\/product\/platinum-smart-heat-electric\/\" target=\"_blank\" rel=\"noopener\"\u003eBromic Platinum Smart-Heat Electric product page\u003c\/a\u003e \u003cspan class=\"mnk-docs__meta\"\u003eModels, materials, mounting, controls, FAQ\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.bromic.com\/warranty\/\" target=\"_blank\" rel=\"noopener\"\u003eBromic warranty terms\u003c\/a\u003e \u003cspan class=\"mnk-docs__meta\"\u003eWarranty periods by product line\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 id=\"legal\"\u003eLegal disclaimers and warnings\u003c\/h3\u003e\n\u003cp class=\"mnk-legal\"\u003eProduct packaging, owners' manuals, installation instructions, and\/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product.\u003c\/p\u003e\n\u003cp class=\"mnk-legal\"\u003eWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"Bromic Heating","offers":[{"title":"240V \/ Black","offer_id":68167507706135,"sku":"BH0320005","price":2194.0,"currency_code":"USD","in_stock":true},{"title":"240V \/ White","offer_id":68167507738903,"sku":"BH0320008","price":2379.0,"currency_code":"USD","in_stock":true},{"title":"208V \/ Black","offer_id":68167507771671,"sku":"BH0320021","price":2194.0,"currency_code":"USD","in_stock":true},{"title":"208V \/ White","offer_id":68167507804439,"sku":"BH0320022","price":2379.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1251\/8981\/files\/bromic-platinum-smart-heat-electric-3400w-patio-heater-bh0320005-bh0320008-bh0320021-and-others.jpg?v=1794343423"},{"product_id":"bromic-platinum-smart-heat-electric-4500w-patio-heater","title":"Bromic Platinum Smart-Heat Electric 4500W Patio Heater - Black or White, 240V or 208V","description":"\u003ch2 id=\"description\" data-mnk-layout=\"1\"\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe Bromic Platinum Smart-Heat Electric 4500W is the largest of Bromic's slim Platinum electric heaters: a 4500W radiant heater, 53.2 in. wide and 2.1 in. deep, with a brushed 304 stainless steel body and a tinted ceramic-glass face over sealed thin-film elements. Bromic rates it for an area of up to 143 sq ft, enough to warm a dining or lounge area under a covered patio, pergola or loggia from one fixture.\u003c\/p\u003e\n\u003cp\u003eChoose 220-240V (BH3622000 black, BH3622001 white) or 208V (BH3622004 black, BH3622005 white) above to match your building's supply. It mounts on a wall or ceiling with the bracket supplied, hangs from a \u003ca href=\"\/products\/bromic-platinum-electric-tube-suspension-kit\"\u003etube suspension kit\u003c\/a\u003e, or sits flush in the ceiling with a \u003ca href=\"\/products\/bromic-platinum-electric-ceiling-recess-kit\"\u003eceiling recess kit\u003c\/a\u003e or \u003ca href=\"\/products\/bromic-platinum-electric-low-clearance-recess-kit\"\u003elow clearance recess kit\u003c\/a\u003e. Heat runs at full power from a \u003ca href=\"\/products\/bromic-manual-wall-switch-heater-kit\"\u003emanual wall switch\u003c\/a\u003e or an \u003ca href=\"\/products\/bromic-affinity-smart-heat-on-off-controller\"\u003eAffinity On\/Off controller\u003c\/a\u003e, or can be adjusted from 0 to 100% with an \u003ca href=\"\/products\/bromic-affinity-smart-heat-dimmer-controller\"\u003eAffinity Dimmer controller\u003c\/a\u003e (all sold separately). Bromic says the standard model is not suited to coastal or marine environments: near the sea, choose the \u003ca href=\"\/products\/bromic-platinum-smart-heat-electric-marine-4500w-patio-heater\"\u003ePlatinum Electric Marine 4500W\u003c\/a\u003e in 316 stainless. For a smaller area, see the \u003ca href=\"\/products\/bromic-platinum-smart-heat-electric-3400w-patio-heater\"\u003ePlatinum Electric 3400W\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003ePlan before ordering: the heater is hard-wired by a licensed technician, with a two-pole RCD and a bipolar circuit breaker upstream and a means of isolation in the fixed wiring, because the heater has no switch. Mount it at least 72 in. above the floor on a wall or 96 in. on a ceiling, with 39.4 in. clear in front. Bromic recommends a covered position, out of direct rain, snow and salt mist.\u003c\/p\u003e\n\u003cul class=\"mnk-glance\"\u003e\n\u003cli\u003e\n\u003cstrong class=\"mnk-glance__label\"\u003eOutput:\u003c\/strong\u003e 4500W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong class=\"mnk-glance__label\"\u003eHeat area:\u003c\/strong\u003e Up to 143 sq ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong class=\"mnk-glance__label\"\u003eVoltage:\u003c\/strong\u003e 220-240V or 208V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong class=\"mnk-glance__label\"\u003eSize:\u003c\/strong\u003e 53.2 x 10.1 x 2.1 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong class=\"mnk-glance__label\"\u003eBody:\u003c\/strong\u003e 304 stainless steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"features\"\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4500W for up to 143 sq ft:\u003c\/strong\u003e the largest Platinum Electric size, above the 2300W and 3400W, to warm a whole dining or lounge area from one fixture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully enclosed 304 stainless body:\u003c\/strong\u003e a brushed stainless chassis for covered outdoor spaces away from the coast.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlim profile:\u003c\/strong\u003e 53.2 x 10.1 x 2.1 in. and 33 lb, so it sits close to a wall or ceiling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTinted ceramic-glass face:\u003c\/strong\u003e over a sealed compartment with thin-film elements, giving radiant heat with a clean, flat front.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour ways to mount:\u003c\/strong\u003e wall, ceiling, tube suspension or recessed; the supplied bracket mounts straight or angled 28 degrees either way to aim the heat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAffinity control:\u003c\/strong\u003e full power from an Affinity On\/Off controller or wall switch, or 0 to 100% adjustment with an Affinity Dimmer controller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather-sealed:\u003c\/strong\u003e rated IP54 with the supplied covers, cable gland and gasket fitted; Bromic still recommends a covered position out of direct rain.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"specifications\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"mnk-specs\"\u003e\u003ctbody\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eIdentification\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eBromic Heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeries\u003c\/th\u003e\n\u003ctd\u003ePlatinum Smart-Heat Electric (Series II)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart numbers, 220-240V\u003c\/th\u003e\n\u003ctd\u003eBH3622000 (black), BH3622001 (white)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart numbers, 208V\u003c\/th\u003e\n\u003ctd\u003eBH3622004 (black), BH3622005 (white)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003ePerformance\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeat output\u003c\/th\u003e\n\u003ctd\u003e4500W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeat area\u003c\/th\u003e\n\u003ctd\u003eUp to 143 sq ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeat control\u003c\/th\u003e\n\u003ctd\u003eFull power (wall switch or Affinity On\/Off) or 0-100% (Affinity Dimmer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eElectrical\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupply, 220-240V models\u003c\/th\u003e\n\u003ctd\u003e220-240V AC, 50\/60 Hz, 18.8 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupply, 208V models\u003c\/th\u003e\n\u003ctd\u003e208V AC, 60 Hz, 21.6 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnection\u003c\/th\u003e\n\u003ctd\u003eHard-wired; no switch on the heater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUpstream protection\u003c\/th\u003e\n\u003ctd\u003eTwo-pole RCD or RCCB, plus a bipolar circuit breaker with at least 3 mm (1\/8 in.) contact opening\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOutdoor wiring parts\u003c\/th\u003e\n\u003ctd\u003eIP54 or better for switches, conduit fittings and other components\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eSize and build\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions (W x H x D)\u003c\/th\u003e\n\u003ctd\u003e53.2 x 10.1 x 2.1 in. (1351 x 257 x 54 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e33 lb (15 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eBrushed 304 stainless steel, fully enclosed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFace\u003c\/th\u003e\n\u003ctd\u003eTinted ceramic glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElement\u003c\/th\u003e\n\u003ctd\u003eThin-film elements in a sealed compartment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColors\u003c\/th\u003e\n\u003ctd\u003eBlack or white\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eClearances\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMinimum height, wall mount\u003c\/th\u003e\n\u003ctd\u003e72 in. above the floor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMinimum height, ceiling mount\u003c\/th\u003e\n\u003ctd\u003e96 in. above the floor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eIn front of the heater\u003c\/th\u003e\n\u003ctd\u003e39.4 in. (1,000 mm) clear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCombustible materials\u003c\/th\u003e\n\u003ctd\u003e3 ft from the front; keep them clear of the sides and rear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBetween heaters\u003c\/th\u003e\n\u003ctd\u003e20 in. (500 mm), from the heater edge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBasis\u003c\/th\u003e\n\u003ctd\u003eSurface temperature of 117°F above room temperature\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eRecessed mounting\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeight above heater, standard recess kit\u003c\/th\u003e\n\u003ctd\u003e13.8 in. minimum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeight above heater, low clearance kit\u003c\/th\u003e\n\u003ctd\u003e7.1 in. (180 mm) minimum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeater surface to floor\u003c\/th\u003e\n\u003ctd\u003e2,400 mm (94.5 in.) minimum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRecess to nearest wall\u003c\/th\u003e\n\u003ctd\u003e20 in. (500 mm) on all sides\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCeiling thickness\u003c\/th\u003e\n\u003ctd\u003e0.4 to 1.2 in. (10-30 mm); thicker ceilings: ask Bromic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eCompliance and use\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eListing\u003c\/th\u003e\n\u003ctd\u003ecETLus, Intertek 5001799\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWater rating\u003c\/th\u003e\n\u003ctd\u003eIP54 (Bromic 4500W manual and cut sheet), with the covers, cable gland and gasket fitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControls\u003c\/th\u003e\n\u003ctd\u003eAffinity On\/Off, Affinity Dimmer, manual wall switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUse\u003c\/th\u003e\n\u003ctd\u003eCovered outdoor areas; not for coastal or marine environments (choose the Marine version)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cdiv class=\"mnk-kit\"\u003e\n\u003cdiv class=\"mnk-kit__col\"\u003e\n\u003ch3 id=\"whats-included\"\u003eWhat's included\u003c\/h3\u003e\n\u003cul class=\"mnk-included\"\u003e\n\u003cli\u003ePlatinum Smart-Heat Electric 4500W heater\u003c\/li\u003e\n\u003cli\u003eWall and ceiling mounting bracket, for straight mounting or 28 degrees either way\u003c\/li\u003e\n\u003cli\u003eM6 x 14 mm mounting screws and M3 x 10 mm positioning screws\u003c\/li\u003e\n\u003cli\u003eGrey screw plug for the wall bracket\u003c\/li\u003e\n\u003cli\u003eMetal cable gland and black gasket\u003c\/li\u003e\n\u003cli\u003eSmaller and larger bracket covers, straight and angled (fit them, with the gland and gasket, to keep the IP rating)\u003c\/li\u003e\n\u003cli\u003eInstruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot included: fasteners into the wall or ceiling structure, controls, and recess or suspension kits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mnk-kit__col\"\u003e\n\u003ch3 id=\"sold-separately\"\u003eSold separately\u003c\/h3\u003e\n\u003cul class=\"mnk-optional\"\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-platinum-electric-ceiling-recess-kit\"\u003eCeiling recess kit\u003c\/a\u003e, 4500W size (BH3623000): flush mount where there is at least 13.8 in. above the heater\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-platinum-electric-low-clearance-recess-kit\"\u003eLow clearance recess kit\u003c\/a\u003e, 4500W size (BH3623012-1): flush mount in a cavity as shallow as 7.1 in., with its own cooling fan\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-platinum-electric-tube-suspension-kit\"\u003eTube suspension kit\u003c\/a\u003e, 4500W size, 600 mm or 1200 mm: ceiling mounting only, replaces the supplied bracket\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-affinity-smart-heat-on-off-controller\"\u003eAffinity Smart-Heat On\/Off controller\u003c\/a\u003e: full-power on\/off control\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-affinity-smart-heat-dimmer-controller\"\u003eAffinity Smart-Heat Dimmer controller\u003c\/a\u003e: 0 to 100% heat adjustment\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bromic-affinity-smart-heat-expansion-board\"\u003eAffinity Smart-Heat expansion board (BH3130070)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bromic-manual-wall-switch-heater-kit\"\u003eManual wall switch kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 id=\"installation\"\u003eInstallation planning\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstaller:\u003c\/strong\u003e permanent installation and hard-wiring by a licensed, authorized technician, to local codes. The heater must be off and cooled for at least 2 hours before handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e connect to a properly grounded supply (220-240V or 208V; check the rating label). Fit a two-pole RCD or RCCB and a bipolar circuit breaker with at least 3 mm contact opening upstream, and build a means of isolation into the fixed wiring. Keep the cable away from the heater body and sharp edges, and do not bend or stress it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e not directly below or in front of an electrical socket, and away from bathtubs, showers, pools and other water. Never cover the heater with insulation, hang items on it or place anything against it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather:\u003c\/strong\u003e do not expose the heater directly to rain or water; Bromic recommends a covered position, out of rain, snow and salt mist. Near the coast, use the Marine version.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecessing:\u003c\/strong\u003e the standard recess kit needs at least 13.8 in. above the heater; with less height, use the low clearance kit (7.1 in.). The heater surface must be at least 2,400 mm above the floor, 20 in. from the nearest wall, in a ceiling 0.4 to 1.2 in. thick. The installer confirms the ceiling structure can carry the heater and kit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube suspension:\u003c\/strong\u003e ceiling mounting only, never on a wall; the kit uses its own ceiling bracket instead of the supplied one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFire sprinklers:\u003c\/strong\u003e never use ethylene or propylene glycol in a sprinkler system where heaters are present, keep sprinklers a safe distance from the heater, and consult a fire sprinkler professional where both are present.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSafety notes:\u003c\/strong\u003e Keep children and vulnerable people supervised near the heater. Do not touch or press on the glass, even when it is cool, and stop using the heater if the glass or any part is damaged. Do not paint the heater or use aerosols or flammable liquids near it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCare:\u003c\/strong\u003e Switch off and let the heater cool for at least 2 hours, then wipe off dirt and dust with a soft, damp cloth; do not use a steam cleaner. Ventilation is not needed, as the heater gives off no combustion byproducts; Bromic advises switching it off when not in use rather than running it overnight. Bromic asks for an inspection before use and a service at least once a year, including a check of the RCD and circuit breaker.\u003c\/p\u003e\n\u003ch3 id=\"warranty\"\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBromic covers the Platinum Electric heater for 3 years. Coverage is for the original owner only: Bromic or its agent supplies a replacement heater or a replacement for the failed part. The owner pays for labor to service, remove and reinstall the heater, shipping to and from the distributor, handling and administrative charges, and any materials or permits needed to install the replacement. Implied warranties are limited to one year.\u003c\/p\u003e\n\u003cp\u003eStart a claim with the dealer who sold you the heater; keep your proof of purchase.\u003c\/p\u003e\n\u003ch3 id=\"manuals\"\u003eManuals and documents\u003c\/h3\u003e\n\u003cul class=\"mnk-docs\"\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/pim.bromic.com\/wp-content\/uploads\/2026\/01\/Product-Cut-Sheet-Platinum-Electric-Marine.pdf\" target=\"_blank\" rel=\"noopener\"\u003ePlatinum Smart-Heat Electric and Marine cut sheet (PDF)\u003c\/a\u003e \u003cspan class=\"mnk-docs__meta\"\u003ePart numbers, heat areas, weights, current, mounting heights, recess heights\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/pim.bromic.com\/wp-content\/uploads\/2021\/07\/Bromic-Platinum-Smart-Heat-Electric-SII-Instruction-Manual-4.5kW-AU-UK-US_v1.1.pdf\" target=\"_blank\" rel=\"noopener\"\u003ePlatinum Smart-Heat Electric Series II 4500W installation, instruction and service manual, AU\/UK\/US (PDF)\u003c\/a\u003e \u003cspan class=\"mnk-docs__meta\"\u003ePart numbers, electrical data, clearances, bracket, recess and tube mounting, wiring, care\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/pim.bromic.com\/wp-content\/uploads\/2025\/12\/Bromic-Platinum-Electric-Low-Clearance-Recess-Kit-Manual-EN.pdf\" target=\"_blank\" rel=\"noopener\"\u003ePlatinum Smart-Heat Electric Low Clearance Ceiling Recess installation instructions, REV10 (PDF)\u003c\/a\u003e \u003cspan class=\"mnk-docs__meta\"\u003eCut-outs, cavity, assembly weights, fan power, heater fitting\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.bromic.com\/product\/platinum-smart-heat-electric\/\" target=\"_blank\" rel=\"noopener\"\u003eBromic Platinum Smart-Heat Electric product page\u003c\/a\u003e \u003cspan class=\"mnk-docs__meta\"\u003eModels, materials, mounting, controls, FAQ\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.bromic.com\/warranty\/\" target=\"_blank\" rel=\"noopener\"\u003eBromic warranty terms\u003c\/a\u003e \u003cspan class=\"mnk-docs__meta\"\u003eWarranty periods by product line\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 id=\"legal\"\u003eLegal disclaimers and warnings\u003c\/h3\u003e\n\u003cp class=\"mnk-legal\"\u003eProduct packaging, owners' manuals, installation instructions, and\/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product.\u003c\/p\u003e\n\u003cp class=\"mnk-legal\"\u003eWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003c\/p\u003e\n","brand":"Bromic Heating","offers":[{"title":"240V \/ Black","offer_id":68167507902743,"sku":"BH3622000","price":2761.0,"currency_code":"USD","in_stock":true},{"title":"240V \/ White","offer_id":68167507935511,"sku":"BH3622001","price":2936.0,"currency_code":"USD","in_stock":true},{"title":"208V \/ Black","offer_id":68167507968279,"sku":"BH3622004","price":2761.0,"currency_code":"USD","in_stock":true},{"title":"208V \/ White","offer_id":68167508001047,"sku":"BH3622005","price":2936.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1251\/8981\/files\/bromic-platinum-smart-heat-electric-4500w-patio-heater-bh3622000-bh3622001-bh3622004-and-others.jpg?v=1794343434"},{"product_id":"bromic-platinum-smart-heat-electric-marine-2300w-patio-heater","title":"Bromic Platinum Smart-Heat Electric Marine 2300W Patio Heater - Black or White, 240V or 208V","description":"\u003ch2 id=\"description\" data-mnk-layout=\"1\"\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe Bromic Platinum Smart-Heat Electric Marine 2300W is the coastal-grade version of Bromic's slim Platinum electric heater: a 2300W radiant heater, 33.0 in. wide and 2.0 in. deep, with a brushed AISI 316 marine-grade stainless steel body and a tinted ceramic-glass face over sealed thin-film elements. Bromic rates it for an area of up to 65 sq ft, and the 316 steel is there to resist the salt air of waterfront patios, balconies and terraces, where the standard model uses 304 steel.\u003c\/p\u003e\n\u003cp\u003eChoose 220-240V (BH0320015 black, BH0320017 white) or 208V (BH0320023 black, BH0320024 white) above to match your building's supply. It mounts on a wall or ceiling with the bracket supplied, hangs from a \u003ca href=\"\/products\/bromic-platinum-electric-marine-tube-suspension-kit\"\u003emarine tube suspension kit\u003c\/a\u003e, or sits flush in the ceiling with a \u003ca href=\"\/products\/bromic-platinum-electric-marine-ceiling-recess-kit\"\u003emarine ceiling recess kit\u003c\/a\u003e or \u003ca href=\"\/products\/bromic-platinum-electric-marine-low-clearance-recess-kit\"\u003emarine low clearance recess kit\u003c\/a\u003e. Heat runs at full power from a \u003ca href=\"\/products\/bromic-manual-wall-switch-heater-kit\"\u003emanual wall switch\u003c\/a\u003e or an \u003ca href=\"\/products\/bromic-affinity-smart-heat-on-off-controller\"\u003eAffinity On\/Off controller\u003c\/a\u003e, or can be adjusted from 0 to 100% with an \u003ca href=\"\/products\/bromic-affinity-smart-heat-dimmer-controller\"\u003eAffinity Dimmer controller\u003c\/a\u003e (all sold separately). For a sheltered site away from the coast, the \u003ca href=\"\/products\/bromic-platinum-smart-heat-electric-2300w-patio-heater\"\u003estandard Platinum Electric 2300W\u003c\/a\u003e is the 304 stainless version; for a larger area, see the \u003ca href=\"\/products\/bromic-platinum-smart-heat-electric-marine-3400w-patio-heater\"\u003eMarine 3400W\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003ePlan before ordering: the heater is hard-wired by a licensed technician, with a two-pole RCD and a bipolar circuit breaker upstream and a means of isolation in the fixed wiring, because the heater has no switch. Mount it at least 72 in. above the floor on a wall or 96 in. on a ceiling, with 39.4 in. clear in front. It is for land-based and coastal sites only: Bromic's manual says it must not be installed on boats, marine craft or recreational vehicles.\u003c\/p\u003e\n\u003cul class=\"mnk-glance\"\u003e\n\u003cli\u003e\n\u003cstrong class=\"mnk-glance__label\"\u003eOutput:\u003c\/strong\u003e 2300W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong class=\"mnk-glance__label\"\u003eHeat area:\u003c\/strong\u003e Up to 65 sq ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong class=\"mnk-glance__label\"\u003eVoltage:\u003c\/strong\u003e 220-240V or 208V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong class=\"mnk-glance__label\"\u003eSize:\u003c\/strong\u003e 33.0 x 7.0 x 2.0 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong class=\"mnk-glance__label\"\u003eBody:\u003c\/strong\u003e 316 marine-grade stainless steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"features\"\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-grade 316 stainless:\u003c\/strong\u003e an AISI 316 body for corrosive coastal air, for heaters on waterfront patios, balconies and terraces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2300W for up to 65 sq ft:\u003c\/strong\u003e the smallest Platinum Electric size, to warm a single table, bar or seating nook from one fixture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlim profile:\u003c\/strong\u003e 33.0 x 7.0 x 2.0 in. and 16.5 lb, so it sits close to a wall or ceiling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTinted ceramic-glass face:\u003c\/strong\u003e over a sealed compartment with thin-film elements, giving radiant heat with a clean, flat front.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour ways to mount:\u003c\/strong\u003e wall, ceiling, tube suspension or recessed; the supplied bracket mounts straight or angled 30 degrees either way to aim the heat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAffinity control:\u003c\/strong\u003e full power from an Affinity On\/Off controller or wall switch, or 0 to 100% adjustment with an Affinity Dimmer controller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed for coastal weather:\u003c\/strong\u003e rated IPX5 with the fully sealed bracket covers and cable gland fitted; Bromic still recommends a covered position out of direct rain and salt mist.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"specifications\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"mnk-specs\"\u003e\u003ctbody\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eIdentification\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eBromic Heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeries\u003c\/th\u003e\n\u003ctd\u003ePlatinum Smart-Heat Electric Marine (Series II)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart numbers, 220-240V\u003c\/th\u003e\n\u003ctd\u003eBH0320015 (black), BH0320017 (white)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart numbers, 208V\u003c\/th\u003e\n\u003ctd\u003eBH0320023 (black), BH0320024 (white)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003ePerformance\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeat output\u003c\/th\u003e\n\u003ctd\u003e2300W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeat area\u003c\/th\u003e\n\u003ctd\u003eUp to 65 sq ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeat control\u003c\/th\u003e\n\u003ctd\u003eFull power (wall switch or Affinity On\/Off) or 0-100% (Affinity Dimmer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eElectrical\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupply, 220-240V models\u003c\/th\u003e\n\u003ctd\u003e220-240V AC, 50\/60 Hz, 9.6 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupply, 208V models\u003c\/th\u003e\n\u003ctd\u003e208V AC, 11.1 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnection\u003c\/th\u003e\n\u003ctd\u003eHard-wired; no switch on the heater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUpstream protection\u003c\/th\u003e\n\u003ctd\u003eTwo-pole RCD or RCCB, plus a bipolar circuit breaker with at least 3 mm (1\/8 in.) contact opening\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOutdoor wiring parts\u003c\/th\u003e\n\u003ctd\u003eIP55 switches and conduit fittings for the marine (IPX5) install\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eSize and build\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions (W x H x D)\u003c\/th\u003e\n\u003ctd\u003e33.0 x 7.0 x 2.0 in. (840 x 182 x 54 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e16.5 lb (7.5 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eBrushed AISI 316 marine-grade stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFace\u003c\/th\u003e\n\u003ctd\u003eTinted ceramic glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElement\u003c\/th\u003e\n\u003ctd\u003eThin-film elements in a sealed compartment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColors\u003c\/th\u003e\n\u003ctd\u003eBlack or white\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eClearances\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMinimum height, wall mount\u003c\/th\u003e\n\u003ctd\u003e72 in. above the floor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMinimum height, ceiling mount\u003c\/th\u003e\n\u003ctd\u003e96 in. above the floor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eIn front of the heater\u003c\/th\u003e\n\u003ctd\u003e39.4 in. (1,000 mm) clear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCombustible materials\u003c\/th\u003e\n\u003ctd\u003e3 ft from the front; keep them clear of the sides and rear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBetween heaters\u003c\/th\u003e\n\u003ctd\u003e20 in. (500 mm), from the heater edge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBasis\u003c\/th\u003e\n\u003ctd\u003eSurface temperature of 149°F above room temperature\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eRecessed mounting\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeight above heater, standard recess kit\u003c\/th\u003e\n\u003ctd\u003e10 in. minimum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeight above heater, low clearance kit\u003c\/th\u003e\n\u003ctd\u003e7.1 in. (180 mm) minimum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeater surface to floor\u003c\/th\u003e\n\u003ctd\u003e2,400 mm (94.5 in.) minimum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRecess to nearest wall\u003c\/th\u003e\n\u003ctd\u003e20 in. (500 mm) on all sides\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCeiling thickness\u003c\/th\u003e\n\u003ctd\u003e0.4 to 1.2 in. (10-30 mm); thicker ceilings: ask Bromic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eCompliance and use\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eListing\u003c\/th\u003e\n\u003ctd\u003ecETLus, Intertek 5001799\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWater rating\u003c\/th\u003e\n\u003ctd\u003eIPX5 for the marine version (Bromic Series II manual), with the fully sealed bracket covers and cable gland fitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControls\u003c\/th\u003e\n\u003ctd\u003eAffinity On\/Off, Affinity Dimmer, manual wall switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUse\u003c\/th\u003e\n\u003ctd\u003eLand-based and coastal installations; not for boats, marine craft or recreational vehicles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e5 years for land-based installations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cdiv class=\"mnk-kit\"\u003e\n\u003cdiv class=\"mnk-kit__col\"\u003e\n\u003ch3 id=\"whats-included\"\u003eWhat's included\u003c\/h3\u003e\n\u003cul class=\"mnk-included\"\u003e\n\u003cli\u003ePlatinum Smart-Heat Electric Marine 2300W heater\u003c\/li\u003e\n\u003cli\u003ePlug-in wall and ceiling mounting bracket, for straight mounting or 30 degrees either way\u003c\/li\u003e\n\u003cli\u003eM6 x 14 mm mounting screws and M3 x 10 mm positioning screws\u003c\/li\u003e\n\u003cli\u003eExtra cable gland\u003c\/li\u003e\n\u003cli\u003eSmaller and larger bracket covers, angled and straight (fit them to keep the IP rating)\u003c\/li\u003e\n\u003cli\u003eInstruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot included: fasteners into the wall or ceiling structure, controls, and recess or suspension kits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mnk-kit__col\"\u003e\n\u003ch3 id=\"sold-separately\"\u003eSold separately\u003c\/h3\u003e\n\u003cul class=\"mnk-optional\"\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-platinum-electric-marine-ceiling-recess-kit\"\u003eMarine ceiling recess kit\u003c\/a\u003e, 2300W size (BH3130034): flush mount where there is at least 10 in. above the heater\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-platinum-electric-marine-low-clearance-recess-kit\"\u003eMarine low clearance recess kit\u003c\/a\u003e, 2300W size: flush mount in a cavity as shallow as 7.1 in., with its own cooling fan\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-platinum-electric-marine-tube-suspension-kit\"\u003eMarine tube suspension kit\u003c\/a\u003e, 600 mm (BH3130046) or 1200 mm (BH3130047): ceiling mounting only, replaces the supplied bracket\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-affinity-smart-heat-on-off-controller\"\u003eAffinity Smart-Heat On\/Off controller\u003c\/a\u003e: full-power on\/off control\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-affinity-smart-heat-dimmer-controller\"\u003eAffinity Smart-Heat Dimmer controller\u003c\/a\u003e: 0 to 100% heat adjustment\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bromic-affinity-smart-heat-expansion-board\"\u003eAffinity Smart-Heat expansion board (BH3130070)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bromic-manual-wall-switch-heater-kit\"\u003eManual wall switch kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 id=\"installation\"\u003eInstallation planning\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstaller:\u003c\/strong\u003e permanent installation and hard-wiring by a licensed, authorized technician, to local codes. The heater must be off and cooled for at least 2 hours before handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e connect to a properly grounded supply (220-240V or 208V; check the rating label). Fit a two-pole RCD or RCCB and a bipolar circuit breaker with at least 3 mm contact opening upstream, and build a means of isolation into the fixed wiring. Keep the cable away from the heater body and sharp edges, and do not bend or stress it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e not directly below or in front of an electrical socket, and away from bathtubs, showers, pools and other water. Never cover the heater with insulation, hang items on it or place anything against it, and never mount it facing up.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather:\u003c\/strong\u003e Bromic recommends mounting it under cover, not exposed to direct rain or salt mist, even though the marine version is sealed against water jets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecessing:\u003c\/strong\u003e the standard marine recess kit needs at least 10 in. above the heater; with less height, use the low clearance kit (7.1 in.). The heater surface must be at least 2,400 mm above the floor, 20 in. from the nearest wall, in a ceiling 0.4 to 1.2 in. thick. With the low clearance kit the 2300W assembly weighs 41 lb (18.5 kg), and the installer confirms the structure can carry it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube suspension:\u003c\/strong\u003e ceiling mounting only, never on a wall; the kit uses its own ceiling bracket instead of the supplied one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFire sprinklers:\u003c\/strong\u003e never use ethylene or propylene glycol in a sprinkler system where heaters are present, keep sprinklers a safe distance from the heater, and consult a fire sprinkler professional where both are present.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoats and vehicles:\u003c\/strong\u003e for land and coastal sites only; not for boats, marine craft or recreational vehicles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSafety notes:\u003c\/strong\u003e Keep children and vulnerable people supervised near the heater. Do not touch or press on the glass, even when it is cool, and stop using the heater if the glass or any part is damaged. Do not paint the heater or use aerosols or flammable liquids near it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCare:\u003c\/strong\u003e Switch off and let the heater cool for at least 2 hours, then wipe it with a soft, damp cloth; do not use a steam cleaner. In coastal areas, clean it every two weeks, rinse off salt spray promptly, and have a qualified technician check it for corrosion every month, removing it from service if safety is affected. Bromic asks for an inspection before use and a service at least once a year, including a check of the RCD and circuit breaker.\u003c\/p\u003e\n\u003ch3 id=\"warranty\"\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBromic covers the Platinum Electric Marine heater for 5 years on land-based installations. Coverage is for the original owner only: Bromic or its agent supplies a replacement heater or a replacement for the failed part. The owner pays for labor to service, remove and reinstall the heater, shipping to and from the distributor, handling and administrative charges, and any materials or permits needed to install the replacement. Implied warranties are limited to one year.\u003c\/p\u003e\n\u003cp\u003eStart a claim with the dealer who sold you the heater; keep your proof of purchase.\u003c\/p\u003e\n\u003ch3 id=\"manuals\"\u003eManuals and documents\u003c\/h3\u003e\n\u003cul class=\"mnk-docs\"\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/pim.bromic.com\/wp-content\/uploads\/2026\/01\/Product-Cut-Sheet-Platinum-Electric-Marine.pdf\" target=\"_blank\" rel=\"noopener\"\u003ePlatinum Smart-Heat Electric and Marine cut sheet (PDF)\u003c\/a\u003e \u003cspan class=\"mnk-docs__meta\"\u003ePart numbers, heat areas, weights, current, mounting heights, recess heights\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/pim.bromic.com\/wp-content\/uploads\/2021\/07\/Bromic-Platinum-Smart-Heat-Electric-SII-Instruction-Manual-US_v4.pdf\" target=\"_blank\" rel=\"noopener\"\u003ePlatinum Smart-Heat Electric Series II instruction manual, US Version 4 (PDF)\u003c\/a\u003e \u003cspan class=\"mnk-docs__meta\"\u003e2300W and 3400W part numbers, electrical data, clearances, bracket, recess and tube mounting, wiring, care\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/pim.bromic.com\/wp-content\/uploads\/2025\/12\/Bromic-Platinum-Electric-Low-Clearance-Recess-Kit-Manual-EN.pdf\" target=\"_blank\" rel=\"noopener\"\u003ePlatinum Smart-Heat Electric Low Clearance Ceiling Recess installation instructions, REV10 (PDF)\u003c\/a\u003e \u003cspan class=\"mnk-docs__meta\"\u003eCut-outs, cavity, assembly weights, fan power, heater fitting\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.bromic.com\/product\/platinum-smart-heat-electric-marine\/\" target=\"_blank\" rel=\"noopener\"\u003eBromic Platinum Smart-Heat Electric Marine product page\u003c\/a\u003e \u003cspan class=\"mnk-docs__meta\"\u003eModels, materials, mounting, controls\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.bromic.com\/warranty\/\" target=\"_blank\" rel=\"noopener\"\u003eBromic warranty terms\u003c\/a\u003e \u003cspan class=\"mnk-docs__meta\"\u003eWarranty periods by product line\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 id=\"legal\"\u003eLegal disclaimers and warnings\u003c\/h3\u003e\n\u003cp class=\"mnk-legal\"\u003eProduct packaging, owners' manuals, installation instructions, and\/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product.\u003c\/p\u003e\n\u003cp class=\"mnk-legal\"\u003eWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003c\/p\u003e\n","brand":"Bromic Heating","offers":[{"title":"240V \/ Black","offer_id":68167508066583,"sku":"BH0320015","price":3645.0,"currency_code":"USD","in_stock":true},{"title":"240V \/ White","offer_id":68167508099351,"sku":"BH0320017","price":3733.0,"currency_code":"USD","in_stock":true},{"title":"208V \/ Black","offer_id":68167508132119,"sku":"BH0320023","price":3645.0,"currency_code":"USD","in_stock":true},{"title":"208V \/ White","offer_id":68167508164887,"sku":"BH0320024","price":3733.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1251\/8981\/files\/bromic-platinum-smart-heat-electric-marine-2300w-patio-bh0320015-bh0320017-bh0320023-and-others.jpg?v=1794343435"},{"product_id":"bromic-platinum-smart-heat-electric-marine-3400w-patio-heater","title":"Bromic Platinum Smart-Heat Electric Marine 3400W Patio Heater - Black or White, 240V or 208V","description":"\u003ch2 id=\"description\" data-mnk-layout=\"1\"\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe Bromic Platinum Smart-Heat Electric Marine 3400W is the coastal-grade version of Bromic's slim Platinum electric heater: a 3400W radiant heater, 50.2 in. wide and 2.0 in. deep, with a brushed AISI 316 marine-grade stainless steel body and a tinted ceramic-glass face over sealed thin-film elements. Bromic rates it for an area of up to 108 sq ft, and the 316 steel is there to resist the salt air of waterfront patios, decks and terraces, where the standard model uses 304 steel.\u003c\/p\u003e\n\u003cp\u003eChoose 220-240V (BH0320016 black, BH0320018 white) or 208V (BH0320025 black, BH0320026 white) above to match your building's supply. It mounts on a wall or ceiling with the bracket supplied, hangs from a \u003ca href=\"\/products\/bromic-platinum-electric-marine-tube-suspension-kit\"\u003emarine tube suspension kit\u003c\/a\u003e, or sits flush in the ceiling with a \u003ca href=\"\/products\/bromic-platinum-electric-marine-ceiling-recess-kit\"\u003emarine ceiling recess kit\u003c\/a\u003e or \u003ca href=\"\/products\/bromic-platinum-electric-marine-low-clearance-recess-kit\"\u003emarine low clearance recess kit\u003c\/a\u003e. Heat runs at full power from a \u003ca href=\"\/products\/bromic-manual-wall-switch-heater-kit\"\u003emanual wall switch\u003c\/a\u003e or an \u003ca href=\"\/products\/bromic-affinity-smart-heat-on-off-controller\"\u003eAffinity On\/Off controller\u003c\/a\u003e, or can be adjusted from 0 to 100% with an \u003ca href=\"\/products\/bromic-affinity-smart-heat-dimmer-controller\"\u003eAffinity Dimmer controller\u003c\/a\u003e (all sold separately). For a sheltered site away from the coast, the \u003ca href=\"\/products\/bromic-platinum-smart-heat-electric-3400w-patio-heater\"\u003estandard Platinum Electric 3400W\u003c\/a\u003e is the 304 stainless version.\u003c\/p\u003e\n\u003cp\u003ePlan before ordering: the heater is hard-wired by a licensed technician, with a two-pole RCD and a bipolar circuit breaker upstream and a means of isolation in the fixed wiring, because the heater has no switch. Mount it at least 72 in. above the floor on a wall or 96 in. on a ceiling, with 39.4 in. clear in front. It is for land-based and coastal sites only: Bromic's manual says it must not be installed on boats, marine craft or recreational vehicles.\u003c\/p\u003e\n\u003cul class=\"mnk-glance\"\u003e\n\u003cli\u003e\n\u003cstrong class=\"mnk-glance__label\"\u003eOutput:\u003c\/strong\u003e 3400W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong class=\"mnk-glance__label\"\u003eHeat area:\u003c\/strong\u003e Up to 108 sq ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong class=\"mnk-glance__label\"\u003eVoltage:\u003c\/strong\u003e 220-240V or 208V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong class=\"mnk-glance__label\"\u003eSize:\u003c\/strong\u003e 50.2 x 7.0 x 2.0 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong class=\"mnk-glance__label\"\u003eBody:\u003c\/strong\u003e 316 marine-grade stainless steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"features\"\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-grade 316 stainless:\u003c\/strong\u003e an AISI 316 body for corrosive coastal air, for heaters on waterfront patios, decks and terraces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3400W for up to 108 sq ft:\u003c\/strong\u003e the middle Platinum Electric size, between the 2300W and 4500W, to warm a dining or lounge area from one fixture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlim profile:\u003c\/strong\u003e 50.2 x 7.0 x 2.0 in. and 22 lb, so it sits close to a wall or ceiling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTinted ceramic-glass face:\u003c\/strong\u003e over a sealed compartment with thin-film elements, giving radiant heat with a clean, flat front.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour ways to mount:\u003c\/strong\u003e wall, ceiling, tube suspension or recessed; the supplied bracket mounts straight or angled 30 degrees to aim the heat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAffinity control:\u003c\/strong\u003e full power from an Affinity On\/Off controller or wall switch, or 0 to 100% adjustment with an Affinity Dimmer controller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed for coastal weather:\u003c\/strong\u003e rated IPX5 with the covers and cable gland fitted; Bromic still recommends a covered position out of direct rain and salt mist.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"specifications\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"mnk-specs\"\u003e\u003ctbody\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eIdentification\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eBromic Heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeries\u003c\/th\u003e\n\u003ctd\u003ePlatinum Smart-Heat Electric Marine (Series II)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart numbers, 220-240V\u003c\/th\u003e\n\u003ctd\u003eBH0320016 (black), BH0320018 (white)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart numbers, 208V\u003c\/th\u003e\n\u003ctd\u003eBH0320025 (black), BH0320026 (white)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003ePerformance\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeat output\u003c\/th\u003e\n\u003ctd\u003e3400W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeat area\u003c\/th\u003e\n\u003ctd\u003eUp to 108 sq ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeat control\u003c\/th\u003e\n\u003ctd\u003eFull power (wall switch or Affinity On\/Off) or 0-100% (Affinity Dimmer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eElectrical\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupply, 220-240V models\u003c\/th\u003e\n\u003ctd\u003e220-240V AC, 50\/60 Hz, 14.2 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupply, 208V models\u003c\/th\u003e\n\u003ctd\u003e208V AC, 60 Hz, 16.3 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnection\u003c\/th\u003e\n\u003ctd\u003eHard-wired; no switch on the heater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUpstream protection\u003c\/th\u003e\n\u003ctd\u003eTwo-pole RCD or RCCB, plus a bipolar circuit breaker with at least 3 mm (1\/8 in.) contact opening\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOutdoor wiring parts\u003c\/th\u003e\n\u003ctd\u003eIPX5 minimum; Bromic asks for IP55 switches and conduit fittings on marine installs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eSize and build\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions (W x H x D)\u003c\/th\u003e\n\u003ctd\u003e50.2 x 7.0 x 2.0 in. (1275 x 182 x 54 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e22 lb (10 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eBrushed AISI 316 marine-grade stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFace\u003c\/th\u003e\n\u003ctd\u003eTinted ceramic glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElement\u003c\/th\u003e\n\u003ctd\u003eThin-film elements in a sealed compartment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColors\u003c\/th\u003e\n\u003ctd\u003eBlack or white\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eClearances\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMinimum height, wall mount\u003c\/th\u003e\n\u003ctd\u003e72 in. above the floor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMinimum height, ceiling mount\u003c\/th\u003e\n\u003ctd\u003e96 in. above the floor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eIn front of the heater\u003c\/th\u003e\n\u003ctd\u003e39.4 in. (1,000 mm) clear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCombustible materials\u003c\/th\u003e\n\u003ctd\u003e3 ft from the front; keep them clear of the sides and rear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBetween heaters\u003c\/th\u003e\n\u003ctd\u003e20 in. (500 mm), from the heater edge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBasis\u003c\/th\u003e\n\u003ctd\u003eSurface temperature of 149°F above room temperature\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eRecessed mounting\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeight above heater, standard recess kit\u003c\/th\u003e\n\u003ctd\u003e10 in. minimum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeight above heater, low clearance kit\u003c\/th\u003e\n\u003ctd\u003e7.1 in. minimum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeater surface to floor\u003c\/th\u003e\n\u003ctd\u003e94 in. (2,400 mm) minimum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRecess to nearest wall\u003c\/th\u003e\n\u003ctd\u003e20 in. (500 mm) on all sides\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCeiling thickness\u003c\/th\u003e\n\u003ctd\u003e0.4 to 1.2 in. (10-30 mm); thicker ceilings: ask Bromic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eCompliance and use\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eListing\u003c\/th\u003e\n\u003ctd\u003ecETLus, Intertek 5001799\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWater rating\u003c\/th\u003e\n\u003ctd\u003eIPX5 for the marine version (Bromic 3400W manual), with the fully sealed bracket covers and cable gland fitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControls\u003c\/th\u003e\n\u003ctd\u003eAffinity On\/Off, Affinity Dimmer, manual wall switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUse\u003c\/th\u003e\n\u003ctd\u003eLand-based and coastal installations; not for boats, marine craft or recreational vehicles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e5 years for land-based installations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cdiv class=\"mnk-kit\"\u003e\n\u003cdiv class=\"mnk-kit__col\"\u003e\n\u003ch3 id=\"whats-included\"\u003eWhat's included\u003c\/h3\u003e\n\u003cul class=\"mnk-included\"\u003e\n\u003cli\u003ePlatinum Smart-Heat Electric Marine 3400W heater\u003c\/li\u003e\n\u003cli\u003ePlug-in wall and ceiling mounting bracket, for straight mounting or 30 degrees either way\u003c\/li\u003e\n\u003cli\u003eM6 x 14 mm mounting screws and M3 x 10 mm positioning screws\u003c\/li\u003e\n\u003cli\u003eExtra cable gland\u003c\/li\u003e\n\u003cli\u003eSmaller and larger bracket covers, angled and straight (fit them to keep the IP rating)\u003c\/li\u003e\n\u003cli\u003eInstruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot included: fasteners into the wall or ceiling structure, controls, and recess or suspension kits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mnk-kit__col\"\u003e\n\u003ch3 id=\"sold-separately\"\u003eSold separately\u003c\/h3\u003e\n\u003cul class=\"mnk-optional\"\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-platinum-electric-marine-ceiling-recess-kit\"\u003eMarine ceiling recess kit\u003c\/a\u003e, 3400W size (BH3130035): flush mount where there is at least 10 in. above the heater\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-platinum-electric-marine-low-clearance-recess-kit\"\u003eMarine low clearance recess kit\u003c\/a\u003e, 3400W size (BH3623010-1): flush mount in a cavity as shallow as 7.1 in., with its own cooling fan\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-platinum-electric-marine-tube-suspension-kit\"\u003eMarine tube suspension kit\u003c\/a\u003e, 3400W size, 600 mm (BH3130046) or 1200 mm (BH3130047): ceiling mounting only, replaces the supplied bracket\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-affinity-smart-heat-on-off-controller\"\u003eAffinity Smart-Heat On\/Off controller\u003c\/a\u003e: full-power on\/off control\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-affinity-smart-heat-dimmer-controller\"\u003eAffinity Smart-Heat Dimmer controller\u003c\/a\u003e: 0 to 100% heat adjustment\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bromic-affinity-smart-heat-expansion-board\"\u003eAffinity Smart-Heat expansion board (BH3130070)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bromic-manual-wall-switch-heater-kit\"\u003eManual wall switch kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 id=\"installation\"\u003eInstallation planning\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstaller:\u003c\/strong\u003e permanent installation and hard-wiring by a licensed, authorized technician, to local codes. The heater must be off and cooled for at least 2 hours before handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e connect to a properly grounded supply (240V single or split phase, or 208V; check the rating label). Fit a two-pole RCD or RCCB and a bipolar circuit breaker with at least 3 mm contact opening upstream, and build a means of isolation into the fixed wiring. Keep the cable away from sharp edges and do not pull or stress it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e not directly below or in front of an electrical socket, and away from bathtubs, showers, pools and other water. Never cover the heater with insulation, hang items on it or place anything against it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather:\u003c\/strong\u003e Bromic recommends mounting it under cover, not exposed to direct rain or salt mist, even though the marine version is sealed against water jets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecessing:\u003c\/strong\u003e the standard marine recess kit needs at least 10 in. above the heater; with less height, use the low clearance kit (7.1 in.). The heater surface must be at least 2,400 mm above the floor, 20 in. from the nearest wall, in a ceiling 0.4 to 1.2 in. thick. With the low clearance kit the 3400W assembly weighs 53 lb (24 kg), and the installer confirms the structure can carry it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube suspension:\u003c\/strong\u003e ceiling mounting only, never on a wall; the kit uses its own ceiling bracket instead of the supplied one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFire sprinklers:\u003c\/strong\u003e never use ethylene or propylene glycol in a sprinkler system near the heater, and consult a fire sprinkler professional where both are present.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoats and vehicles:\u003c\/strong\u003e for land and coastal sites only; not for boats, marine craft or recreational vehicles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSafety notes:\u003c\/strong\u003e Keep children and vulnerable people supervised near the heater. Do not touch or press on the glass, even when it is cool, and stop using the heater if the glass is damaged.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCare:\u003c\/strong\u003e Switch off and let the heater cool for at least 2 hours, then wipe it with a soft, damp cloth; do not use a steam cleaner. In coastal areas, clean it every two weeks, rinse off salt spray promptly, and have a qualified technician check it for corrosion every month, removing it from service if safety is affected. Bromic asks for an inspection before use and a service at least once a year, including a check of the RCD and circuit breaker.\u003c\/p\u003e\n\u003ch3 id=\"warranty\"\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBromic covers the Platinum Electric Marine heater for 5 years on land-based installations. Coverage is for the original owner only: Bromic or its agent supplies a replacement heater or a replacement for the failed part. The owner pays for labor to service, remove and reinstall the heater, shipping to and from the distributor, handling and administrative charges, and any materials or permits needed to install the replacement. Implied warranties are limited to one year.\u003c\/p\u003e\n\u003cp\u003eStart a claim with the dealer who sold you the heater; keep your proof of purchase.\u003c\/p\u003e\n\u003ch3 id=\"manuals\"\u003eManuals and documents\u003c\/h3\u003e\n\u003cul class=\"mnk-docs\"\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/pim.bromic.com\/wp-content\/uploads\/2026\/01\/Product-Cut-Sheet-Platinum-Electric-Marine.pdf\" target=\"_blank\" rel=\"noopener\"\u003ePlatinum Smart-Heat Electric and Marine cut sheet (PDF)\u003c\/a\u003e \u003cspan class=\"mnk-docs__meta\"\u003ePart numbers, heat areas, weights, current, mounting heights\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/pim.bromic.com\/wp-content\/uploads\/2021\/07\/Bromic-Platinum-Smart-Heat-Electric-SII-Instruction-Manual-US_v4.pdf\" target=\"_blank\" rel=\"noopener\"\u003ePlatinum Smart-Heat Electric Series II instruction manual, US Version 4 (PDF)\u003c\/a\u003e \u003cspan class=\"mnk-docs__meta\"\u003e2300W and 3400W part numbers, electrical data, clearances, bracket, recess and tube mounting, wiring, care\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/pim.bromic.com\/wp-content\/uploads\/2025\/12\/Bromic-Platinum-Electric-Low-Clearance-Recess-Kit-Manual-EN.pdf\" target=\"_blank\" rel=\"noopener\"\u003ePlatinum Smart-Heat Electric Low Clearance Ceiling Recess installation instructions, REV10 (PDF)\u003c\/a\u003e \u003cspan class=\"mnk-docs__meta\"\u003eCut-outs, cavity, fan power, heater fitting\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.bromic.com\/product\/platinum-smart-heat-electric-marine\/\" target=\"_blank\" rel=\"noopener\"\u003eBromic Platinum Smart-Heat Electric Marine product page\u003c\/a\u003e \u003cspan class=\"mnk-docs__meta\"\u003eModels, materials, mounting, controls\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.bromic.com\/warranty\/\" target=\"_blank\" rel=\"noopener\"\u003eBromic warranty terms\u003c\/a\u003e \u003cspan class=\"mnk-docs__meta\"\u003eWarranty periods by product line\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 id=\"legal\"\u003eLegal disclaimers and warnings\u003c\/h3\u003e\n\u003cp class=\"mnk-legal\"\u003eProduct packaging, owners' manuals, installation instructions, and\/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product.\u003c\/p\u003e\n\u003cp class=\"mnk-legal\"\u003eWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003c\/p\u003e\n","brand":"Bromic Heating","offers":[{"title":"240V \/ Black","offer_id":68167509704983,"sku":"BH0320016","price":4792.0,"currency_code":"USD","in_stock":true},{"title":"240V \/ White","offer_id":68167509737751,"sku":"BH0320018","price":4869.0,"currency_code":"USD","in_stock":true},{"title":"208V \/ Black","offer_id":68167509770519,"sku":"BH0320025","price":4792.0,"currency_code":"USD","in_stock":true},{"title":"208V \/ White","offer_id":68167509803287,"sku":"BH0320026","price":4869.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1251\/8981\/files\/bromic-platinum-smart-heat-electric-marine-3400w-patio-bh0320016-bh0320018-bh0320025-and-others.jpg?v=1794343435"},{"product_id":"bromic-platinum-smart-heat-electric-marine-4500w-patio-heater","title":"Bromic Platinum Smart-Heat Electric Marine 4500W Patio Heater - Black or White, 240V or 208V","description":"\u003ch2 id=\"description\" data-mnk-layout=\"1\"\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe Bromic Platinum Smart-Heat Electric Marine 4500W is the coastal-grade version of Bromic's slim Platinum electric heater: a 4500W radiant heater, 53.2 in. wide and 2.1 in. deep, with a brushed AISI 316 marine-grade stainless steel body and a tinted ceramic-glass face over sealed thin-film elements. Bromic rates it for an area of up to 143 sq ft, and the 316 steel is there to resist the salt air of waterfront patios, decks and terraces, where the standard model uses 304 steel.\u003c\/p\u003e\n\u003cp\u003eChoose 220-240V (BH3622002 black, BH3622003 white) or 208V (BH3622006 black, BH3622007 white) above to match your building's supply. It mounts on a wall or ceiling with the bracket supplied, hangs from a \u003ca href=\"\/products\/bromic-platinum-electric-marine-tube-suspension-kit\"\u003emarine tube suspension kit\u003c\/a\u003e, or sits flush in the ceiling with a \u003ca href=\"\/products\/bromic-platinum-electric-marine-ceiling-recess-kit\"\u003emarine ceiling recess kit\u003c\/a\u003e or \u003ca href=\"\/products\/bromic-platinum-electric-marine-low-clearance-recess-kit\"\u003emarine low clearance recess kit\u003c\/a\u003e. Heat runs at full power from a \u003ca href=\"\/products\/bromic-manual-wall-switch-heater-kit\"\u003emanual wall switch\u003c\/a\u003e or an \u003ca href=\"\/products\/bromic-affinity-smart-heat-on-off-controller\"\u003eAffinity On\/Off controller\u003c\/a\u003e, or can be adjusted from 0 to 100% with an \u003ca href=\"\/products\/bromic-affinity-smart-heat-dimmer-controller\"\u003eAffinity Dimmer controller\u003c\/a\u003e (all sold separately). For a sheltered site away from the coast, the \u003ca href=\"\/products\/bromic-platinum-smart-heat-electric-4500w-patio-heater\"\u003estandard Platinum Electric 4500W\u003c\/a\u003e is the 304 stainless version.\u003c\/p\u003e\n\u003cp\u003ePlan before ordering: the heater is hard-wired by a licensed technician, with a two-pole RCD and a bipolar circuit breaker upstream and a means of isolation in the fixed wiring, because the heater has no switch. Mount it at least 72 in. above the floor on a wall or 96 in. on a ceiling, with 39.4 in. clear in front. It is for land-based and coastal sites only: Bromic's manual says it must not be installed on boats, marine craft or recreational vehicles.\u003c\/p\u003e\n\u003cul class=\"mnk-glance\"\u003e\n\u003cli\u003e\n\u003cstrong class=\"mnk-glance__label\"\u003eOutput:\u003c\/strong\u003e 4500W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong class=\"mnk-glance__label\"\u003eHeat area:\u003c\/strong\u003e Up to 143 sq ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong class=\"mnk-glance__label\"\u003eVoltage:\u003c\/strong\u003e 220-240V or 208V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong class=\"mnk-glance__label\"\u003eSize:\u003c\/strong\u003e 53.2 x 10.1 x 2.1 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong class=\"mnk-glance__label\"\u003eBody:\u003c\/strong\u003e 316 marine-grade stainless steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"features\"\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-grade 316 stainless:\u003c\/strong\u003e an AISI 316 body for corrosive coastal air, for heaters on waterfront patios, decks and terraces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4500W for up to 143 sq ft:\u003c\/strong\u003e the largest Platinum Electric size, to warm a dining or lounge area from one fixture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlim profile:\u003c\/strong\u003e 53.2 x 10.1 x 2.1 in. and 33 lb, so it sits close to a wall or ceiling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTinted ceramic-glass face:\u003c\/strong\u003e over a sealed compartment with thin-film elements, giving radiant heat with a clean, flat front.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour ways to mount:\u003c\/strong\u003e wall, ceiling, tube suspension or recessed; the supplied bracket mounts straight or angled 28 degrees to aim the heat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAffinity control:\u003c\/strong\u003e full power from an Affinity On\/Off controller or wall switch, or 0 to 100% adjustment with an Affinity Dimmer controller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed for coastal weather:\u003c\/strong\u003e rated IP55 with the covers and cable gland fitted; Bromic still recommends a covered position out of direct rain and salt mist.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"specifications\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"mnk-specs\"\u003e\u003ctbody\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eIdentification\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eBromic Heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeries\u003c\/th\u003e\n\u003ctd\u003ePlatinum Smart-Heat Electric Marine (Series II)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart numbers, 220-240V\u003c\/th\u003e\n\u003ctd\u003eBH3622002 (black), BH3622003 (white)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart numbers, 208V\u003c\/th\u003e\n\u003ctd\u003eBH3622006 (black), BH3622007 (white)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003ePerformance\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeat output\u003c\/th\u003e\n\u003ctd\u003e4500W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeat area\u003c\/th\u003e\n\u003ctd\u003eUp to 143 sq ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeat control\u003c\/th\u003e\n\u003ctd\u003eFull power (wall switch or Affinity On\/Off) or 0-100% (Affinity Dimmer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eElectrical\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupply, 220-240V models\u003c\/th\u003e\n\u003ctd\u003e220-240V AC, 50\/60 Hz, 18.8 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupply, 208V models\u003c\/th\u003e\n\u003ctd\u003e208V AC, 60 Hz, 21.6 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnection\u003c\/th\u003e\n\u003ctd\u003eHard-wired; no switch on the heater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUpstream protection\u003c\/th\u003e\n\u003ctd\u003eTwo-pole RCD or RCCB, plus a bipolar circuit breaker with at least 3 mm (1\/8 in.) contact opening\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOutdoor wiring parts\u003c\/th\u003e\n\u003ctd\u003eIP55 minimum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eSize and build\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions (W x H x D)\u003c\/th\u003e\n\u003ctd\u003e53.2 x 10.1 x 2.1 in. (1351 x 257 x 54 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e33 lb (15 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eBrushed AISI 316 marine-grade stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFace\u003c\/th\u003e\n\u003ctd\u003eTinted ceramic glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElement\u003c\/th\u003e\n\u003ctd\u003eThin-film elements in a sealed compartment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColors\u003c\/th\u003e\n\u003ctd\u003eBlack or white\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eClearances\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMinimum height, wall mount\u003c\/th\u003e\n\u003ctd\u003e72 in. above the floor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMinimum height, ceiling mount\u003c\/th\u003e\n\u003ctd\u003e96 in. above the floor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eIn front of the heater\u003c\/th\u003e\n\u003ctd\u003e39.4 in. (1,000 mm) clear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCombustible materials\u003c\/th\u003e\n\u003ctd\u003e3 ft from the front; keep them clear of the sides and rear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBetween heaters\u003c\/th\u003e\n\u003ctd\u003e20 in. (500 mm), from the heater edge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBasis\u003c\/th\u003e\n\u003ctd\u003eSurface temperature of 117°F above room temperature\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eRecessed mounting\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeight above heater, standard recess kit\u003c\/th\u003e\n\u003ctd\u003e13.8 in. minimum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeight above heater, low clearance kit\u003c\/th\u003e\n\u003ctd\u003e7.1 in. minimum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeater surface to floor\u003c\/th\u003e\n\u003ctd\u003e94 in. (2,400 mm) minimum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRecess to nearest wall\u003c\/th\u003e\n\u003ctd\u003e20 in. (500 mm) on all sides\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCeiling thickness\u003c\/th\u003e\n\u003ctd\u003e0.4 to 1.2 in. (10-30 mm); thicker ceilings: ask Bromic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eCompliance and use\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eListing\u003c\/th\u003e\n\u003ctd\u003ecETLus, Intertek 5001799\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWater rating\u003c\/th\u003e\n\u003ctd\u003eIP55 for the marine version (Bromic 4500W manual), with the supplied covers and cable gland fitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControls\u003c\/th\u003e\n\u003ctd\u003eAffinity On\/Off, Affinity Dimmer, manual wall switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUse\u003c\/th\u003e\n\u003ctd\u003eLand-based and coastal installations; not for boats, marine craft or recreational vehicles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e5 years for land-based installations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cdiv class=\"mnk-kit\"\u003e\n\u003cdiv class=\"mnk-kit__col\"\u003e\n\u003ch3 id=\"whats-included\"\u003eWhat's included\u003c\/h3\u003e\n\u003cul class=\"mnk-included\"\u003e\n\u003cli\u003ePlatinum Smart-Heat Electric Marine 4500W heater\u003c\/li\u003e\n\u003cli\u003eWall and ceiling mounting bracket, for straight or 28-degree angled mounting\u003c\/li\u003e\n\u003cli\u003eM6 x 14 mm mounting screws and M3 x 10 mm positioning screws\u003c\/li\u003e\n\u003cli\u003eMetal cable gland, grey plug and black gasket\u003c\/li\u003e\n\u003cli\u003eSmaller and larger bracket covers (fit them to keep the IP rating)\u003c\/li\u003e\n\u003cli\u003eInstruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot included: fasteners into the wall or ceiling structure, controls, and recess or suspension kits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mnk-kit__col\"\u003e\n\u003ch3 id=\"sold-separately\"\u003eSold separately\u003c\/h3\u003e\n\u003cul class=\"mnk-optional\"\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-platinum-electric-marine-ceiling-recess-kit\"\u003eMarine ceiling recess kit\u003c\/a\u003e, 4500W size (BH3623001): flush mount where there is at least 13.8 in. above the heater\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-platinum-electric-marine-low-clearance-recess-kit\"\u003eMarine low clearance recess kit\u003c\/a\u003e, 4500W size (BH3623013-1): flush mount in a cavity as shallow as 7.1 in., with its own cooling fan\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-platinum-electric-marine-tube-suspension-kit\"\u003eMarine tube suspension kit\u003c\/a\u003e, 4500W size, 600 mm (BH3623022) or 1200 mm (BH3623023): ceiling mounting only, replaces the supplied bracket\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-affinity-smart-heat-on-off-controller\"\u003eAffinity Smart-Heat On\/Off controller\u003c\/a\u003e: full-power on\/off control\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-affinity-smart-heat-dimmer-controller\"\u003eAffinity Smart-Heat Dimmer controller\u003c\/a\u003e: 0 to 100% heat adjustment\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bromic-affinity-smart-heat-expansion-board\"\u003eAffinity Smart-Heat expansion board (BH3130070)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bromic-manual-wall-switch-heater-kit\"\u003eManual wall switch kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 id=\"installation\"\u003eInstallation planning\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstaller:\u003c\/strong\u003e permanent installation and hard-wiring by a licensed, authorized technician, to local codes. The heater must be off and cooled for at least 2 hours before handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e connect to a properly grounded supply (240V single or split phase, or 208V; check the rating label). Fit a two-pole RCD or RCCB and a bipolar circuit breaker with at least 3 mm contact opening upstream, and build a means of isolation into the fixed wiring. Keep the cable away from sharp edges and do not pull or stress it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e not directly below or in front of an electrical socket, and away from bathtubs, showers, pools and other water. Never cover the heater with insulation, hang items on it or place anything against it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather:\u003c\/strong\u003e Bromic recommends mounting it under cover, not exposed to direct rain or salt mist, even though the marine version is sealed against water jets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecessing:\u003c\/strong\u003e the standard marine recess kit needs at least 13.8 in. above the heater; with less height, use the low clearance kit (7.1 in.). The heater surface must be at least 2,400 mm above the floor, 20 in. from the nearest wall, in a ceiling 0.4 to 1.2 in. thick. The installer confirms the ceiling structure can carry the heater and kit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube suspension:\u003c\/strong\u003e ceiling mounting only, never on a wall; the kit uses its own ceiling bracket instead of the supplied one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFire sprinklers:\u003c\/strong\u003e never use ethylene or propylene glycol in a sprinkler system near the heater, and consult a fire sprinkler professional where both are present.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoats and vehicles:\u003c\/strong\u003e for land and coastal sites only; not for boats, marine craft or recreational vehicles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSafety notes:\u003c\/strong\u003e Keep children and vulnerable people supervised near the heater. Do not touch or press on the glass, even when it is cool, and stop using the heater if the glass is damaged. Do not paint the heater or use aerosols or flammable materials near it while it runs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCare:\u003c\/strong\u003e Switch off and let the heater cool for at least 2 hours, then wipe it with a soft, damp cloth; do not use a steam cleaner. In coastal areas, clean it every two weeks, rinse off salt spray promptly, and have a qualified technician check it for corrosion every month, removing it from service if safety is affected. Bromic asks for an inspection before use and a service at least once a year, including a check of the RCD and circuit breaker.\u003c\/p\u003e\n\u003ch3 id=\"warranty\"\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBromic covers the Platinum Electric Marine heater for 5 years on land-based installations. Coverage is for the original owner only: Bromic or its agent supplies a replacement heater or a replacement for the failed part. The owner pays for labor to service, remove and reinstall the heater, shipping to and from the distributor, handling and administrative charges, and any materials or permits needed to install the replacement. Implied warranties are limited to one year.\u003c\/p\u003e\n\u003cp\u003eStart a claim with the dealer who sold you the heater; keep your proof of purchase.\u003c\/p\u003e\n\u003ch3 id=\"manuals\"\u003eManuals and documents\u003c\/h3\u003e\n\u003cul class=\"mnk-docs\"\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/pim.bromic.com\/wp-content\/uploads\/2026\/01\/Product-Cut-Sheet-Platinum-Electric-Marine.pdf\" target=\"_blank\" rel=\"noopener\"\u003ePlatinum Smart-Heat Electric and Marine cut sheet (PDF)\u003c\/a\u003e \u003cspan class=\"mnk-docs__meta\"\u003ePart numbers, heat areas, weights, current, mounting heights\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/pim.bromic.com\/wp-content\/uploads\/2021\/07\/Bromic-Platinum-Smart-Heat-Electric-SII-Instruction-Manual-4.5kW-AU-UK-US_v1.1.pdf\" target=\"_blank\" rel=\"noopener\"\u003ePlatinum Smart-Heat Electric Series II 4500W installation, instruction and service manual, AU\/UK\/US (PDF)\u003c\/a\u003e \u003cspan class=\"mnk-docs__meta\"\u003ePart numbers, electrical data, clearances, bracket, recess and tube mounting, wiring, care\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/pim.bromic.com\/wp-content\/uploads\/2025\/12\/Bromic-Platinum-Electric-Low-Clearance-Recess-Kit-Manual-EN.pdf\" target=\"_blank\" rel=\"noopener\"\u003ePlatinum Smart-Heat Electric Low Clearance Ceiling Recess installation instructions, REV10 (PDF)\u003c\/a\u003e \u003cspan class=\"mnk-docs__meta\"\u003eCut-outs, cavity, fan power, heater fitting\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.bromic.com\/product\/platinum-smart-heat-electric-marine\/\" target=\"_blank\" rel=\"noopener\"\u003eBromic Platinum Smart-Heat Electric Marine product page\u003c\/a\u003e \u003cspan class=\"mnk-docs__meta\"\u003eModels, materials, mounting, controls\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.bromic.com\/warranty\/\" target=\"_blank\" rel=\"noopener\"\u003eBromic warranty terms\u003c\/a\u003e \u003cspan class=\"mnk-docs__meta\"\u003eWarranty periods by product line\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 id=\"legal\"\u003eLegal disclaimers and warnings\u003c\/h3\u003e\n\u003cp class=\"mnk-legal\"\u003eProduct packaging, owners' manuals, installation instructions, and\/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product.\u003c\/p\u003e\n\u003cp class=\"mnk-legal\"\u003eWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003c\/p\u003e\n","brand":"Bromic Heating","offers":[{"title":"240V \/ Black","offer_id":68167509901591,"sku":"BH3622002","price":5786.0,"currency_code":"USD","in_stock":true},{"title":"240V \/ White","offer_id":68167509934359,"sku":"BH3622003","price":5873.0,"currency_code":"USD","in_stock":true},{"title":"208V \/ Black","offer_id":68167509967127,"sku":"BH3622006","price":5786.0,"currency_code":"USD","in_stock":true},{"title":"208V \/ White","offer_id":68167509999895,"sku":"BH3622007","price":5873.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1251\/8981\/files\/bromic-platinum-smart-heat-electric-marine-4500w-patio-bh3622002-bh3622003-bh3622006-and-others.jpg?v=1794343444"},{"product_id":"bromic-tungsten-smart-heat-electric-2000w-patio-heater","title":"Bromic Tungsten Smart-Heat Electric 2000W Patio Heater","description":"\u003ch2 id=\"description\" data-mnk-layout=\"1\"\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe Bromic Tungsten Smart-Heat Electric 2000W is a 44 in. long infrared heater with one quartz tube element behind a honeycomb mesh front. The element is a thick steel coil inside translucent fused quartz, backed by a mirror-finish anodized reflector. The body is stainless steel with a high-temperature, corrosion-resistant black coating, rated IPX4 for covered outdoor areas such as patios, pergolas, restaurant terraces and bars.\u003c\/p\u003e\n\u003cp\u003eThis listing is the 220-240V model in black, Bromic part number BH0420030 (our SKU adds a -2 suffix); Bromic lists the North American 2000W in black only. The heater mounts on a wall or ceiling with the two 6.5 in. brackets supplied, hangs on the \u003ca href=\"\/products\/bromic-tungsten-electric-tube-suspension-kit\"\u003eTungsten Electric tube suspension kit\u003c\/a\u003e, or sits flush with the \u003ca href=\"\/products\/bromic-tungsten-electric-ceiling-recess-kit\"\u003eTungsten Electric ceiling recess kit\u003c\/a\u003e. Control it with an \u003ca href=\"\/products\/bromic-affinity-smart-heat-on-off-controller\"\u003eAffinity On\/Off controller\u003c\/a\u003e, an \u003ca href=\"\/products\/bromic-affinity-smart-heat-dimmer-controller\"\u003eAffinity Dimmer controller\u003c\/a\u003e or the \u003ca href=\"\/products\/bromic-manual-wall-switch-heater-kit\"\u003emanual wall switch kit\u003c\/a\u003e. For two elements in the same 44 in. body, see the \u003ca href=\"\/products\/bromic-tungsten-smart-heat-electric-4000w-patio-heater\"\u003eTungsten Electric 4000W\u003c\/a\u003e; for a longer 56 in. single-element heater, the \u003ca href=\"\/products\/bromic-tungsten-smart-heat-electric-3000w-patio-heater\"\u003e3000W\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003ePlan before ordering: the heater is hard-wired by a licensed electrician on one branch circuit, to a grounded 220-240V supply with a means of disconnection in the fixed wiring, using 90°C-rated supply wire. Mount the heater surface at least 96 in. above the floor (Bromic's cut sheet allows 72 in. on a wall in the US), keep 3 ft clear in front of it, and mount it with the element horizontal, never vertically. Controls and recess or suspension kits are sold separately.\u003c\/p\u003e\n\u003cul class=\"mnk-glance\"\u003e\n\u003cli\u003e\n\u003cstrong class=\"mnk-glance__label\"\u003eOutput:\u003c\/strong\u003e 2000W, one element\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong class=\"mnk-glance__label\"\u003eVoltage:\u003c\/strong\u003e 220-240V, 8.3 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong class=\"mnk-glance__label\"\u003eSize:\u003c\/strong\u003e 44 x 8.5 x 3.5 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong class=\"mnk-glance__label\"\u003eWeight:\u003c\/strong\u003e 19.8 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong class=\"mnk-glance__label\"\u003eRating:\u003c\/strong\u003e IPX4, ETL \/ cETL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"features\"\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2000W from one quartz tube element:\u003c\/strong\u003e the smallest Tungsten Electric output, on a single branch circuit at 8.3 A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoft-glow infrared element:\u003c\/strong\u003e radiant heat with no harsh glare, directed with the adjustable brackets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMirror-finish anodized reflector:\u003c\/strong\u003e Bromic's parabolic specular reflector directs the heat forward.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless body, IPX4:\u003c\/strong\u003e high-temperature, corrosion-resistant black coating with a honeycomb mesh front.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable 6.5 in. brackets:\u003c\/strong\u003e wall or ceiling mounting, rotated to the angle you need and locked with a screw.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour mounting methods:\u003c\/strong\u003e wall, ceiling, tube suspension or flush ceiling recess, plus chain suspension.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo ventilation needed:\u003c\/strong\u003e an electric heater has no combustion, so it suits covered and enclosed-roof patios.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"specifications\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"mnk-specs\"\u003e\u003ctbody\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eIdentification\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eBromic Heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eTungsten Smart-Heat Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eBH0420030 (220-240V, black)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOther versions\u003c\/th\u003e\n\u003ctd\u003e208V and 277V versions are in Bromic's manual (ask us)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003ePerformance\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeat output\u003c\/th\u003e\n\u003ctd\u003e2000W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElements\u003c\/th\u003e\n\u003ctd\u003e1 quartz tube element\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eReflector\u003c\/th\u003e\n\u003ctd\u003eMirror-finish anodized (parabolic specular)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl\u003c\/th\u003e\n\u003ctd\u003eAffinity On\/Off, Affinity Dimmer, manual wall switch, or hard-wired\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eElectrical\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupply\u003c\/th\u003e\n\u003ctd\u003e220-240V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCurrent\u003c\/th\u003e\n\u003ctd\u003e8.3 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnection\u003c\/th\u003e\n\u003ctd\u003eHard-wired, grounded; one branch circuit, leads L1\/N1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupply wire\u003c\/th\u003e\n\u003ctd\u003eCopper or aluminum, rated 90°C (194°F) minimum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJunction box entry\u003c\/th\u003e\n\u003ctd\u003e22 mm (0.86 in.) to standard 1\/2 in. weatherproof conduit fitting; IPX4 cord grip rated 90°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eSize and build\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e44 x 8.5 x 3.5 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e19.8 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMounting brackets\u003c\/th\u003e\n\u003ctd\u003e6.5 in., two supplied\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eStainless steel, high-temperature corrosion-resistant coating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFront\u003c\/th\u003e\n\u003ctd\u003eHoneycomb mesh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColor\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eClearances\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMinimum mounting height\u003c\/th\u003e\n\u003ctd\u003eHeater surface 96 in. above the floor (required for cETL); cut sheet: wall 72 in., ceiling 96 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eIn front of the heater\u003c\/th\u003e\n\u003ctd\u003e3 ft (900 mm) clear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCombustible materials\u003c\/th\u003e\n\u003ctd\u003e3 ft from the front; keep them clear of the sides and rear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBetween heaters\u003c\/th\u003e\n\u003ctd\u003e20 in. from heater edge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeater face to ceiling, tube suspension\u003c\/th\u003e\n\u003ctd\u003e9.84 in. minimum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCeiling recess box length\u003c\/th\u003e\n\u003ctd\u003e46 in. minimum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBasis\u003c\/th\u003e\n\u003ctd\u003eSurface temperature of 117°F above room temperature\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eCompliance and use\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eListing\u003c\/th\u003e\n\u003ctd\u003eIntertek ETL \/ cETL 4005951\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWater ingress\u003c\/th\u003e\n\u003ctd\u003eIPX4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUse\u003c\/th\u003e\n\u003ctd\u003eIndoor and covered outdoor spot heating, residential or commercial\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 years heater, 7 years heating element\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cdiv class=\"mnk-kit\"\u003e\n\u003cdiv class=\"mnk-kit__col\"\u003e\n\u003ch3 id=\"whats-included\"\u003eWhat's included\u003c\/h3\u003e\n\u003cul class=\"mnk-included\"\u003e\n\u003cli\u003eTungsten Smart-Heat Electric 2000W heater with front cover\u003c\/li\u003e\n\u003cli\u003eOne tube element\u003c\/li\u003e\n\u003cli\u003eTwo 6.5 in. wall or ceiling mounting brackets\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003cli\u003eInstallation, instruction and service manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot included: fasteners into the wall or ceiling, controls, chains, and recess or suspension kits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mnk-kit__col\"\u003e\n\u003ch3 id=\"sold-separately\"\u003eSold separately\u003c\/h3\u003e\n\u003cul class=\"mnk-optional\"\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-tungsten-electric-ceiling-recess-kit\"\u003eTungsten Electric ceiling recess kit\u003c\/a\u003e, 2000W\/4000W size: BH8180010 black; mounts the heater flush in a ceiling box\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-tungsten-electric-tube-suspension-kit\"\u003eTungsten Electric tube suspension kit\u003c\/a\u003e, 3 ft: BH8180012 black; hangs the heater 39.39 in. below the ceiling, angled 15, 30 or 45 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-affinity-smart-heat-on-off-controller\"\u003eAffinity Smart-Heat On\/Off controller\u003c\/a\u003e, 1, 2 or 5 channel (BH3130051\/52\/53): full-power control, 6000W per channel\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-affinity-smart-heat-dimmer-controller\"\u003eAffinity Smart-Heat Dimmer controller\u003c\/a\u003e, 1, 2 or 5 channel (BH3130061\/62\/63): adjustable heat, 6000W per channel\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-affinity-smart-heat-expansion-board\"\u003eAffinity Smart-Heat expansion board (BH3130070)\u003c\/a\u003e: BMS or Ethernet connection for 1 and 2 channel Affinity controllers\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-manual-wall-switch-heater-kit\"\u003eManual wall switch heater kit\u003c\/a\u003e: single switch for a one-element heater\u003c\/li\u003e\n\u003cli\u003eReplacement parts: element 240V BH8180001; front cover BH8180003 black; element end cover set BH8180005; junction box cover and seal set BH8180007; mounting bracket sets BH8180008 short, BH8180009 long (ask us)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 id=\"installation\"\u003eInstallation planning\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstaller:\u003c\/strong\u003e permanent installation and hard-wiring by a licensed, authorized person to local electrical and building codes, on a properly grounded supply that matches the rating label. Disconnect power before installing or servicing, and build a means of disconnection into the fixed wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e one branch circuit only, leads labeled L1 and N1; Bromic's diagram shows a standard wall switch for the 2000W and 3000W models. With an Affinity controller, follow the Affinity manual. Use 90°C-rated wire, an IPX4 cord grip rated 90°C and IPX4 conduit fittings outdoors; the ground screw is in the end of the junction box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrientation:\u003c\/strong\u003e the tube element must be horizontal. Vertical mounting makes the element sag and burn out early, and voids the warranty.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrackets:\u003c\/strong\u003e fasten the brackets to the wall or ceiling (fasteners not supplied), lock the heater on with an M5 x 10 screw and nut, rotate it to the angle you want and lock it with a self-tapping screw. Short brackets (sold separately) bring the heater closer to a wall.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube or chain suspension:\u003c\/strong\u003e the 3 ft tubes put the heater surface 39.39 in. below the ceiling and can be cut shorter (drill new holes); keep at least 9.84 in. from the heater face to the ceiling and 96 in. to the floor. For chains, the installer sizes them for the heater's 19.8 lb and fixes them with crimped S-hooks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCeiling recess:\u003c\/strong\u003e the installer builds a ceiling box at least 46 in. long from cement board or similar and lines joists above it with fireproof insulation; the electrical connection is made outside the box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearances:\u003c\/strong\u003e 3 ft clear in front, combustibles kept 3 ft from the front and clear of the sides and rear (Bromic includes nearby ceiling fans), and 20 in. between heaters. Protect nearby low-heat materials such as vinyl siding, canvas or plastic.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlacement limits:\u003c\/strong\u003e do not aim the heater at the ceiling or mount it directly below or in front of a wall power socket. Not for bathrooms, laundries, wardrobes, RVs or boats, not near a bathtub, shower or pool (switches and controls must be out of reach of anyone using them), and not where gasoline, paint or other flammable liquids or vapors are used or stored.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather:\u003c\/strong\u003e outdoors, mount it with the face angled down and under cover where possible. Bromic advises against direct exposure to rain, snow or salt mist.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCare:\u003c\/strong\u003e Inspect the heater before use and have a qualified, licensed person check it at least once a year; servicing is done with the power disconnected. Clean the housing regularly with a soft, damp cloth, every two weeks in coastal areas where salt air can rust metal. Keep dust off the reflector and element, because buildup causes overheating and early element failure: turn the heater off, wait at least 2 hours, then wipe them with a soft, dry cloth. If the heat seems too low, Bromic's checklist points to a heater that is too small, mounted too high or far, or on the wrong voltage; a hot spot on a tube usually means the heater is not level or the tube has grease or moisture on it. Stop using the heater if you suspect damage, and have a licensed person replace a damaged supply cord. Bromic says it is not designed for continuous overnight use; switch it off or use a timer or controls.\u003c\/p\u003e\n\u003ch3 id=\"warranty\"\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBromic covers the Tungsten Smart-Heat Electric heater for 2 years and its heating element for 7 years. Coverage is for the original owner only: Bromic or its agent supplies a replacement heater or a replacement for the failed part. The owner pays for labor to service, remove and reinstall the heater, shipping to and from the distributor, handling and administrative charges, and any materials or permits needed to install the replacement. Implied warranties are limited to one year.\u003c\/p\u003e\n\u003cp\u003eThe manual states that mounting the heater vertically, or installing the cord grip or conduit fittings incorrectly, voids the warranty. Start a claim with the dealer who sold you the heater; keep your proof of purchase.\u003c\/p\u003e\n\u003ch3 id=\"manuals\"\u003eManuals and documents\u003c\/h3\u003e\n\u003cul class=\"mnk-docs\"\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/pim.bromic.com\/wp-content\/uploads\/2021\/07\/Bromic-Tungsten-Smart-Heat-Electric-Instruction-Manual-US.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTungsten Smart-Heat Electric installation, instruction and service manual, US, 1125_v1 (PDF)\u003c\/a\u003e \u003cspan class=\"mnk-docs__meta\"\u003eModel table, clearances, bracket, chain, tube and recess mounting, element fitting, wiring, care, troubleshooting, spare part numbers\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/pim.bromic.com\/wp-content\/uploads\/2026\/02\/Product-Cut-Sheet-Tungsten-Electric-1.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTungsten Smart-Heat Electric product cut sheet (PDF)\u003c\/a\u003e \u003cspan class=\"mnk-docs__meta\"\u003eModels, rated current, weights, mounting heights, ETL listing, IPX4\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.bromic.com\/product\/tungsten-smart-heat-electric\/\" target=\"_blank\" rel=\"noopener\"\u003eBromic Tungsten Smart-Heat Electric product page\u003c\/a\u003e \u003cspan class=\"mnk-docs__meta\"\u003ePart numbers by voltage and color, materials, controls, clearances, FAQ\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.bromic.com\/warranty\/\" target=\"_blank\" rel=\"noopener\"\u003eBromic warranty terms\u003c\/a\u003e \u003cspan class=\"mnk-docs__meta\"\u003eWarranty periods by product line\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 id=\"legal\"\u003eLegal disclaimers and warnings\u003c\/h3\u003e\n\u003cp class=\"mnk-legal\"\u003eProduct packaging, owners' manuals, installation instructions, and\/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product.\u003c\/p\u003e\n\u003cp class=\"mnk-legal\"\u003eWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003c\/p\u003e\n","brand":"Bromic Heating","offers":[{"title":"Default Title","offer_id":68167510098199,"sku":"BH0420030-2","price":798.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1251\/8981\/files\/bromic-tungsten-smart-heat-electric-2000w-patio-heater-bh0420030-2-black.jpg?v=1794343367"},{"product_id":"bromic-tungsten-smart-heat-electric-3000w-patio-heater","title":"Bromic Tungsten Smart-Heat Electric 3000W Patio Heater","description":"\u003ch2 id=\"description\" data-mnk-layout=\"1\"\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe Bromic Tungsten Smart-Heat Electric 3000W is a 56 in. long infrared heater with one quartz tube element behind a honeycomb mesh front. The element is a thick steel coil inside translucent fused quartz, backed by a mirror-finish anodized reflector. Bromic rates it for a heat area of up to 100 sq ft, and it is rated IPX4 for covered outdoor areas such as patios, pergolas, restaurant terraces and bars.\u003c\/p\u003e\n\u003cp\u003eBromic makes the 3000W in black only for North America. This listing offers BH0420031 for 220-240V and BH0420038 for 208V (both black in Bromic's manual; our SKUs add a -2 suffix). Bromic notes that 220-240V is single phase and typical of homes, while 208V is three phase and typical of commercial buildings. The heater mounts on a wall or ceiling with the two 6.5 in. brackets supplied, hangs on the \u003ca href=\"\/products\/bromic-tungsten-electric-tube-suspension-kit\"\u003eTungsten Electric tube suspension kit\u003c\/a\u003e, or sits flush with the \u003ca href=\"\/products\/bromic-tungsten-electric-ceiling-recess-kit\"\u003eTungsten Electric ceiling recess kit\u003c\/a\u003e. Control it with an \u003ca href=\"\/products\/bromic-affinity-smart-heat-on-off-controller\"\u003eAffinity On\/Off controller\u003c\/a\u003e, an \u003ca href=\"\/products\/bromic-affinity-smart-heat-dimmer-controller\"\u003eAffinity Dimmer controller\u003c\/a\u003e or the \u003ca href=\"\/products\/bromic-manual-wall-switch-heater-kit\"\u003emanual wall switch kit\u003c\/a\u003e. For two elements and more output in the same 56 in. body, see the \u003ca href=\"\/products\/bromic-tungsten-smart-heat-electric-6000w-patio-heater\"\u003eTungsten Electric 6000W\u003c\/a\u003e; for a shorter 44 in. heater, the \u003ca href=\"\/products\/bromic-tungsten-smart-heat-electric-2000w-patio-heater\"\u003e2000W\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003ePlan before ordering: the heater is hard-wired by a licensed electrician on one branch circuit, to a grounded supply with a means of disconnection in the fixed wiring, using 90°C-rated supply wire. Mount the heater surface at least 96 in. above the floor (Bromic's cut sheet allows 72 in. on a wall in the US), keep 3 ft clear in front of it, and mount it with the element horizontal, never vertically. Controls and recess or suspension kits are sold separately.\u003c\/p\u003e\n\u003cul class=\"mnk-glance\"\u003e\n\u003cli\u003e\n\u003cstrong class=\"mnk-glance__label\"\u003eOutput:\u003c\/strong\u003e 3000W, one element\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong class=\"mnk-glance__label\"\u003eHeat area:\u003c\/strong\u003e Up to 100 sq ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong class=\"mnk-glance__label\"\u003eVoltage:\u003c\/strong\u003e 220-240V or 208V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong class=\"mnk-glance__label\"\u003eSize:\u003c\/strong\u003e 56 x 8.5 x 3.5 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong class=\"mnk-glance__label\"\u003eFinish:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"features\"\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3000W for up to 100 sq ft:\u003c\/strong\u003e a single quartz tube element in the 56 in. body, for a seating or dining area under cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoft-glow infrared element:\u003c\/strong\u003e radiant heat with no harsh glare, directed with the adjustable brackets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMirror-finish anodized reflector:\u003c\/strong\u003e Bromic's parabolic specular reflector directs the heat forward.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless body, IPX4:\u003c\/strong\u003e high-temperature, corrosion-resistant black coating with a honeycomb mesh front.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable 6.5 in. brackets:\u003c\/strong\u003e wall or ceiling mounting, rotated to the angle you need and locked with a screw.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour mounting methods:\u003c\/strong\u003e wall, ceiling, tube suspension or flush ceiling recess, plus chain suspension.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo ventilation needed:\u003c\/strong\u003e an electric heater has no combustion, so it suits covered and enclosed-roof patios.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"specifications\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"mnk-specs\"\u003e\u003ctbody\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eIdentification\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eBromic Heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eTungsten Smart-Heat Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart number, 220-240V\u003c\/th\u003e\n\u003ctd\u003eBH0420031 (black)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart number, 208V\u003c\/th\u003e\n\u003ctd\u003eBH0420038 (black)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003ePerformance\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeat output\u003c\/th\u003e\n\u003ctd\u003e3000W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeat area\u003c\/th\u003e\n\u003ctd\u003eUp to 100 sq ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElements\u003c\/th\u003e\n\u003ctd\u003e1 quartz tube element\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eReflector\u003c\/th\u003e\n\u003ctd\u003eMirror-finish anodized (parabolic specular)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl\u003c\/th\u003e\n\u003ctd\u003eAffinity On\/Off, Affinity Dimmer, manual wall switch, or hard-wired\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eElectrical\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCurrent, 220-240V\u003c\/th\u003e\n\u003ctd\u003e12.5 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCurrent, 208V\u003c\/th\u003e\n\u003ctd\u003e14.42 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnection\u003c\/th\u003e\n\u003ctd\u003eHard-wired, grounded; one branch circuit, leads L1\/N1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupply wire\u003c\/th\u003e\n\u003ctd\u003eCopper or aluminum, rated 90°C (194°F) minimum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJunction box entry\u003c\/th\u003e\n\u003ctd\u003e22 mm (0.86 in.) to standard 1\/2 in. weatherproof conduit fitting; IPX4 cord grip rated 90°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eSize and build\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e56 x 8.5 x 3.5 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e22 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMounting brackets\u003c\/th\u003e\n\u003ctd\u003e6.5 in., two supplied\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eStainless steel, high-temperature corrosion-resistant coating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFront\u003c\/th\u003e\n\u003ctd\u003eHoneycomb mesh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColor\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eClearances\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMinimum mounting height\u003c\/th\u003e\n\u003ctd\u003eHeater surface 96 in. above the floor (required for cETL); cut sheet: wall 72 in., ceiling 96 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eIn front of the heater\u003c\/th\u003e\n\u003ctd\u003e3 ft (900 mm) clear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCombustible materials\u003c\/th\u003e\n\u003ctd\u003e3 ft from the front; keep them clear of the sides and rear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBetween heaters\u003c\/th\u003e\n\u003ctd\u003e20 in. from heater edge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeater face to ceiling, tube suspension\u003c\/th\u003e\n\u003ctd\u003e9.84 in. minimum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCeiling recess box length\u003c\/th\u003e\n\u003ctd\u003e57.5 in. minimum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBasis\u003c\/th\u003e\n\u003ctd\u003eSurface temperature of 117°F above room temperature\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eCompliance and use\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eListing\u003c\/th\u003e\n\u003ctd\u003eIntertek ETL \/ cETL 4005951\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWater ingress\u003c\/th\u003e\n\u003ctd\u003eIPX4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUse\u003c\/th\u003e\n\u003ctd\u003eIndoor and covered outdoor spot heating, residential or commercial\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 years heater, 7 years heating element\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cdiv class=\"mnk-kit\"\u003e\n\u003cdiv class=\"mnk-kit__col\"\u003e\n\u003ch3 id=\"whats-included\"\u003eWhat's included\u003c\/h3\u003e\n\u003cul class=\"mnk-included\"\u003e\n\u003cli\u003eTungsten Smart-Heat Electric heater with front cover and protective element end caps\u003c\/li\u003e\n\u003cli\u003eOne tube element and the element bracket\u003c\/li\u003e\n\u003cli\u003eTwo 6.5 in. wall or ceiling mounting brackets\u003c\/li\u003e\n\u003cli\u003eMounting and assembly hardware: M5 screws, self-tapping screws, nuts and washers\u003c\/li\u003e\n\u003cli\u003eInstallation, instruction and service manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot included: fasteners into the wall or ceiling, controls, chains, and recess or suspension kits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mnk-kit__col\"\u003e\n\u003ch3 id=\"sold-separately\"\u003eSold separately\u003c\/h3\u003e\n\u003cul class=\"mnk-optional\"\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-tungsten-electric-ceiling-recess-kit\"\u003eTungsten Electric ceiling recess kit\u003c\/a\u003e, 3000W\/6000W size: BH8180011 black; mounts the heater flush in a ceiling box\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-tungsten-electric-tube-suspension-kit\"\u003eTungsten Electric tube suspension kit\u003c\/a\u003e, 3 ft: BH8180012 black; hangs the heater 39.39 in. below the ceiling, angled 15, 30 or 45 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-affinity-smart-heat-on-off-controller\"\u003eAffinity Smart-Heat On\/Off controller\u003c\/a\u003e, 1, 2 or 5 channel (BH3130051\/52\/53): full-power control, 6000W per channel\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-affinity-smart-heat-dimmer-controller\"\u003eAffinity Smart-Heat Dimmer controller\u003c\/a\u003e, 1, 2 or 5 channel (BH3130061\/62\/63): adjustable heat, 6000W per channel\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-affinity-smart-heat-expansion-board\"\u003eAffinity Smart-Heat expansion board (BH3130070)\u003c\/a\u003e: BMS or Ethernet connection for Affinity controllers\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bromic-manual-wall-switch-heater-kit\"\u003eManual wall switch heater kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eReplacement parts: element 240V BH8180002, 208V BH8180016; front cover BH8180004 black; mounting bracket sets BH8180008 short, BH8180009 long; junction box cover and seal set BH8180007 (ask us)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 id=\"installation\"\u003eInstallation planning\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstaller:\u003c\/strong\u003e permanent installation and hard-wiring by a licensed, authorized person to local electrical and building codes, on a properly grounded supply that matches the rating label. Disconnect power before installing or servicing, and build a means of disconnection into the fixed wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e one branch circuit only, leads labeled L1 and N1; Bromic's diagram shows a standard single-phase wall switch. With an Affinity controller, follow the Affinity manual. Use 90°C-rated wire, an IPX4 cord grip rated 90°C and IPX4 conduit fittings outdoors; the ground screw is in the end of the junction box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrientation:\u003c\/strong\u003e the tube element must be horizontal. Vertical mounting makes the element sag and burn out early, and voids the warranty.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrackets:\u003c\/strong\u003e fasten the brackets to the wall or ceiling (fasteners not supplied), lock the heater on with an M5 x 10 screw and nut, rotate it to the angle you want and lock it with a self-tapping screw.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube or chain suspension:\u003c\/strong\u003e the 3 ft tubes put the heater surface 39.39 in. below the ceiling and can be cut shorter (drill new holes); keep at least 9.84 in. from the heater face to the ceiling and 96 in. to the floor. For chains, the installer sizes them for the heater's 22 lb and fixes them with crimped S-hooks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCeiling recess:\u003c\/strong\u003e the installer builds a ceiling box at least 57.5 in. long from cement board or similar and lines joists above it with fireproof insulation; the electrical connection is made outside the box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearances:\u003c\/strong\u003e 3 ft clear in front, combustibles kept 3 ft from the front and clear of the sides and rear (Bromic includes nearby ceiling fans), and 20 in. between heaters. Protect nearby low-heat materials such as vinyl siding, canvas or plastic.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlacement limits:\u003c\/strong\u003e do not aim the heater at the ceiling or mount it directly below or in front of a wall power socket. Not for bathrooms, laundries, wardrobes, RVs or boats, not near a bathtub, shower or pool (switches and controls must be out of reach of anyone using them), and not where gasoline, paint or other flammable liquids or vapors are used or stored.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather:\u003c\/strong\u003e outdoors, mount it with the face angled down and under cover where possible. Bromic advises against direct exposure to rain, snow or salt mist.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCare:\u003c\/strong\u003e Inspect the heater before use and have a qualified, licensed person check it at least once a year; servicing is done with the power disconnected. Clean the housing regularly with a soft, damp cloth, every two weeks in coastal areas where salt air can rust metal. Keep dust off the reflector and element, because buildup causes overheating and early element failure: turn the heater off, wait at least 2 hours, then wipe them with a soft, dry cloth. If the heat seems too low, Bromic's checklist points to a heater that is too small, mounted too high or far, or on the wrong voltage; a hot spot on a tube usually means the heater is not level or the tube has grease or moisture on it. Stop using the heater if you suspect damage, and have a licensed person replace a damaged supply cord. Bromic says it is not designed for continuous overnight use; switch it off or use a timer or controls.\u003c\/p\u003e\n\u003ch3 id=\"warranty\"\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBromic covers the Tungsten Smart-Heat Electric heater for 2 years and its heating element for 7 years. Coverage is for the original owner only: Bromic or its agent supplies a replacement heater or a replacement for the failed part. The owner pays for labor to service, remove and reinstall the heater, shipping to and from the distributor, handling and administrative charges, and any materials or permits needed to install the replacement. Implied warranties are limited to one year.\u003c\/p\u003e\n\u003cp\u003eThe manual states that mounting the heater vertically, or installing the cord grip or conduit fittings incorrectly, voids the warranty. Start a claim with the dealer who sold you the heater; keep your proof of purchase.\u003c\/p\u003e\n\u003ch3 id=\"manuals\"\u003eManuals and documents\u003c\/h3\u003e\n\u003cul class=\"mnk-docs\"\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/pim.bromic.com\/wp-content\/uploads\/2021\/07\/Bromic-Tungsten-Smart-Heat-Electric-Instruction-Manual-US.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTungsten Smart-Heat Electric installation, instruction and service manual, US, 1125_v1 (PDF)\u003c\/a\u003e \u003cspan class=\"mnk-docs__meta\"\u003eModel table, in-box parts, clearances, bracket, chain, tube and recess mounting, element fitting, wiring, care, troubleshooting, spare part numbers\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/pim.bromic.com\/wp-content\/uploads\/2026\/02\/Product-Cut-Sheet-Tungsten-Electric-1.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTungsten Smart-Heat Electric product cut sheet (PDF)\u003c\/a\u003e \u003cspan class=\"mnk-docs__meta\"\u003eModels, rated current, weights, mounting heights, ETL listing, IPX4\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.bromic.com\/product\/tungsten-smart-heat-electric\/\" target=\"_blank\" rel=\"noopener\"\u003eBromic Tungsten Smart-Heat Electric product page\u003c\/a\u003e \u003cspan class=\"mnk-docs__meta\"\u003ePart numbers by voltage and color, materials, controls, clearances, FAQ\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.bromic.com\/warranty\/\" target=\"_blank\" rel=\"noopener\"\u003eBromic warranty terms\u003c\/a\u003e \u003cspan class=\"mnk-docs__meta\"\u003eWarranty periods by product line\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 id=\"legal\"\u003eLegal disclaimers and warnings\u003c\/h3\u003e\n\u003cp class=\"mnk-legal\"\u003eProduct packaging, owners' manuals, installation instructions, and\/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product.\u003c\/p\u003e\n\u003cp class=\"mnk-legal\"\u003eWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003c\/p\u003e\n","brand":"Bromic Heating","offers":[{"title":"240V \/ Black","offer_id":68167510196503,"sku":"BH0420031-2","price":958.0,"currency_code":"USD","in_stock":true},{"title":"208V \/ White","offer_id":68167510229271,"sku":"BH0420038-2","price":1011.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1251\/8981\/files\/bromic-tungsten-smart-heat-electric-3000w-patio-heater-bh0420031-2-bh0420038-2-black.jpg?v=1794343368"},{"product_id":"bromic-tungsten-smart-heat-electric-4000w-patio-heater","title":"Bromic Tungsten Smart-Heat Electric 4000W Patio Heater","description":"\u003ch2 id=\"description\" data-mnk-layout=\"1\"\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe Bromic Tungsten Smart-Heat Electric 4000W is a 44 in. long infrared heater with two quartz tube elements behind a honeycomb mesh front. Each element is a thick steel coil inside translucent fused quartz, backed by a mirror-finish anodized reflector, and the two elements can be switched separately so you can run one element or both. The body is stainless steel with a high-temperature, corrosion-resistant coating in black or white, rated IPX4 for covered outdoor areas such as patios, pergolas, restaurant terraces and bars.\u003c\/p\u003e\n\u003cp\u003eChoose the supply and finish above: 220-240V (BH0420032 black, BH0420012 white), 208V (BH0420034 black, BH0420037 white) or 277V (BH0420042 black, BH0420044 white); our SKUs add a -2 suffix. Bromic notes that 220-240V is single phase and typical of homes, while 208V is three phase and typical of commercial buildings. The heater mounts on a wall or ceiling with the two 9.5 in. brackets supplied, hangs on the \u003ca href=\"\/products\/bromic-tungsten-electric-tube-suspension-kit\"\u003eTungsten Electric tube suspension kit\u003c\/a\u003e, or sits flush with the \u003ca href=\"\/products\/bromic-tungsten-electric-ceiling-recess-kit\"\u003eTungsten Electric ceiling recess kit\u003c\/a\u003e. Control it with an \u003ca href=\"\/products\/bromic-affinity-smart-heat-on-off-controller\"\u003eAffinity On\/Off controller\u003c\/a\u003e, an \u003ca href=\"\/products\/bromic-affinity-smart-heat-dimmer-controller\"\u003eAffinity Dimmer controller\u003c\/a\u003e or the \u003ca href=\"\/products\/bromic-manual-wall-switch-heater-kit\"\u003emanual wall switch kit\u003c\/a\u003e. For more output in a 56 in. body, see the \u003ca href=\"\/products\/bromic-tungsten-smart-heat-electric-6000w-patio-heater\"\u003eTungsten Electric 6000W\u003c\/a\u003e; for a single-element 44 in. heater, the \u003ca href=\"\/products\/bromic-tungsten-smart-heat-electric-2000w-patio-heater\"\u003e2000W\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003ePlan before ordering: the heater is hard-wired by a licensed electrician to a grounded supply with a means of disconnection in the fixed wiring, using 90°C-rated supply wire. Mount the heater surface at least 96 in. above the floor (Bromic's cut sheet allows 72 in. on a wall in the US), keep 3 ft clear in front of it, and mount it with the elements horizontal, never vertically. Controls and recess or suspension kits are sold separately.\u003c\/p\u003e\n\u003cul class=\"mnk-glance\"\u003e\n\u003cli\u003e\n\u003cstrong class=\"mnk-glance__label\"\u003eOutput:\u003c\/strong\u003e 4000W, two elements\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong class=\"mnk-glance__label\"\u003eVoltage:\u003c\/strong\u003e 220-240V, 208V or 277V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong class=\"mnk-glance__label\"\u003eSize:\u003c\/strong\u003e 44 x 8.5 x 3.5 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong class=\"mnk-glance__label\"\u003eWeight:\u003c\/strong\u003e 19.8 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong class=\"mnk-glance__label\"\u003eRating:\u003c\/strong\u003e IPX4, ETL \/ cETL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"features\"\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4000W from two quartz tube elements:\u003c\/strong\u003e wire them to separate switches or controller channels to run one element or both.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoft-glow infrared element:\u003c\/strong\u003e radiant heat with no harsh glare, directed with the adjustable brackets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMirror-finish anodized reflector:\u003c\/strong\u003e Bromic's parabolic specular reflector directs the heat forward.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless body, IPX4:\u003c\/strong\u003e high-temperature, corrosion-resistant coating in black or white, with a honeycomb mesh front.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable 9.5 in. brackets:\u003c\/strong\u003e wall or ceiling mounting, rotated to the angle you need and locked with a screw.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour mounting methods:\u003c\/strong\u003e wall, ceiling, tube suspension or flush ceiling recess, plus chain suspension.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo ventilation needed:\u003c\/strong\u003e an electric heater has no combustion, so it suits covered and enclosed-roof patios.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"specifications\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"mnk-specs\"\u003e\u003ctbody\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eIdentification\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eBromic Heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eTungsten Smart-Heat Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart numbers, 220-240V\u003c\/th\u003e\n\u003ctd\u003eBH0420032 (black), BH0420012 (white)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart numbers, 208V\u003c\/th\u003e\n\u003ctd\u003eBH0420034 (black), BH0420037 (white)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart numbers, 277V\u003c\/th\u003e\n\u003ctd\u003eBH0420042 (black), BH0420044 (white)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003ePerformance\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeat output\u003c\/th\u003e\n\u003ctd\u003e4000W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElements\u003c\/th\u003e\n\u003ctd\u003e2 quartz tube elements, separately switchable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eReflector\u003c\/th\u003e\n\u003ctd\u003eMirror-finish anodized (parabolic specular)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl\u003c\/th\u003e\n\u003ctd\u003eAffinity On\/Off, Affinity Dimmer, manual wall switch, or hard-wired\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eElectrical\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCurrent, 220-240V\u003c\/th\u003e\n\u003ctd\u003e16.6 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCurrent, 208V\u003c\/th\u003e\n\u003ctd\u003e19.23 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCurrent, 277V\u003c\/th\u003e\n\u003ctd\u003e14.44 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnection\u003c\/th\u003e\n\u003ctd\u003eHard-wired, grounded; element 1 on L1\/N1, element 2 on L2\/N2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupply wire\u003c\/th\u003e\n\u003ctd\u003eCopper or aluminum, rated 90°C (194°F) minimum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJunction box entry\u003c\/th\u003e\n\u003ctd\u003e22 mm (0.86 in.) to standard 1\/2 in. weatherproof conduit fitting; IPX4 cord grip rated 90°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eSize and build\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e44 x 8.5 x 3.5 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e19.8 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMounting brackets\u003c\/th\u003e\n\u003ctd\u003e9.5 in., two supplied\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eStainless steel, high-temperature corrosion-resistant coating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFront\u003c\/th\u003e\n\u003ctd\u003eHoneycomb mesh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColors\u003c\/th\u003e\n\u003ctd\u003eBlack or white\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eClearances\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMinimum mounting height\u003c\/th\u003e\n\u003ctd\u003eHeater surface 96 in. above the floor (required for cETL); cut sheet: wall 72 in., ceiling 96 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eIn front of the heater\u003c\/th\u003e\n\u003ctd\u003e3 ft (900 mm) clear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCombustible materials\u003c\/th\u003e\n\u003ctd\u003e3 ft from the front; keep them clear of the sides and rear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBetween heaters\u003c\/th\u003e\n\u003ctd\u003e20 in. from heater edge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeater face to ceiling, tube suspension\u003c\/th\u003e\n\u003ctd\u003e13 in. minimum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCeiling recess box length\u003c\/th\u003e\n\u003ctd\u003e46 in. minimum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBasis\u003c\/th\u003e\n\u003ctd\u003eSurface temperature of 117°F above room temperature\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eCompliance and use\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eListing\u003c\/th\u003e\n\u003ctd\u003eIntertek ETL \/ cETL 4005951\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWater ingress\u003c\/th\u003e\n\u003ctd\u003eIPX4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUse\u003c\/th\u003e\n\u003ctd\u003eIndoor and covered outdoor spot heating, residential or commercial\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 years heater, 7 years heating elements\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cdiv class=\"mnk-kit\"\u003e\n\u003cdiv class=\"mnk-kit__col\"\u003e\n\u003ch3 id=\"whats-included\"\u003eWhat's included\u003c\/h3\u003e\n\u003cul class=\"mnk-included\"\u003e\n\u003cli\u003eTungsten Smart-Heat Electric heater with front cover and protective element end caps\u003c\/li\u003e\n\u003cli\u003eTwo tube elements and the element bracket\u003c\/li\u003e\n\u003cli\u003eTwo 9.5 in. wall or ceiling mounting brackets\u003c\/li\u003e\n\u003cli\u003eMounting and assembly hardware: M5 screws, self-tapping screws, nuts and washers\u003c\/li\u003e\n\u003cli\u003eInstallation, instruction and service manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot included: fasteners into the wall or ceiling, controls, chains, and recess or suspension kits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mnk-kit__col\"\u003e\n\u003ch3 id=\"sold-separately\"\u003eSold separately\u003c\/h3\u003e\n\u003cul class=\"mnk-optional\"\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-tungsten-electric-ceiling-recess-kit\"\u003eTungsten Electric ceiling recess kit\u003c\/a\u003e, 2000W\/4000W size: BH8180010 black, BH8180096 white; mounts the heater flush in a ceiling box\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-tungsten-electric-tube-suspension-kit\"\u003eTungsten Electric tube suspension kit\u003c\/a\u003e, 3 ft: BH8180012 black (white: see the kit page); hangs the heater 39.39 in. below the ceiling, angled 15, 30 or 45 degrees\u003c\/li\u003e\n\u003cli\u003eShort mounting brackets for wall mounting closer to the wall: BH8180008 black, BH8180021 white (ask us)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-affinity-smart-heat-on-off-controller\"\u003eAffinity Smart-Heat On\/Off controller\u003c\/a\u003e, 1, 2 or 5 channel (BH3130051\/52\/53): full-power control, 6000W per channel\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-affinity-smart-heat-dimmer-controller\"\u003eAffinity Smart-Heat Dimmer controller\u003c\/a\u003e, 1, 2 or 5 channel (BH3130061\/62\/63): adjustable heat, 6000W per channel\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-affinity-smart-heat-expansion-board\"\u003eAffinity Smart-Heat expansion board (BH3130070)\u003c\/a\u003e: BMS or Ethernet connection for Affinity controllers\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bromic-manual-wall-switch-heater-kit\"\u003eManual wall switch heater kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eReplacement elements: 240V BH8180001, 208V BH8180017, 277V BH8180015; front cover BH8180003 black, BH8180018 white; long bracket set BH8180009 black, BH8180022 white; junction box cover and seal set BH8180007 black, BH8180020 white (ask us)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 id=\"installation\"\u003eInstallation planning\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstaller:\u003c\/strong\u003e permanent installation and hard-wiring by a licensed, authorized person to local electrical and building codes, on a properly grounded supply that matches the rating label. Disconnect power before installing or servicing, and build a means of disconnection into the fixed wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e element 1 connects to L1\/N1 and element 2 to L2\/N2, so the elements can run together or independently. Bromic's diagrams show the 4000W on one 20 A wall switch, or on two 20 A switches for separate control of each element. With an Affinity controller, the two hot legs pair L1\/L2 and N1\/N2; follow the Affinity manual. Use 90°C-rated wire, an IPX4 cord grip rated 90°C and IPX4 conduit fittings outdoors; the ground screw is in the end of the junction box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrientation:\u003c\/strong\u003e the tube elements must be horizontal. Vertical mounting makes the elements sag and burn out early, and voids the warranty.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrackets:\u003c\/strong\u003e fasten the brackets to the wall or ceiling (fasteners not supplied), lock the heater on with an M5 x 10 screw and nut, rotate it to the angle you want and lock it with a self-tapping screw. Short brackets (sold separately) bring the heater closer to a wall.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube or chain suspension:\u003c\/strong\u003e the 3 ft tubes put the heater surface 39.39 in. below the ceiling and can be cut shorter (drill new holes); keep at least 13 in. from the heater face to the ceiling and 96 in. to the floor. For chains, the installer sizes them for the heater's 19.8 lb and fixes them with crimped S-hooks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCeiling recess:\u003c\/strong\u003e the installer builds a ceiling box at least 46 in. long from cement board or similar and lines joists above it with fireproof insulation; the electrical connection is made outside the box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearances:\u003c\/strong\u003e 3 ft clear in front, combustibles kept 3 ft from the front and clear of the sides and rear (Bromic includes nearby ceiling fans), and 20 in. between heaters. Protect nearby low-heat materials such as vinyl siding, canvas or plastic.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlacement limits:\u003c\/strong\u003e do not aim the heater at the ceiling or mount it directly below or in front of a wall power socket. Not for bathrooms, laundries, wardrobes, RVs or boats, not near a bathtub, shower or pool (switches and controls must be out of reach of anyone using them), and not where gasoline, paint or other flammable liquids or vapors are used or stored.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather:\u003c\/strong\u003e outdoors, mount it with the face angled down and under cover where possible. Bromic advises against direct exposure to rain, snow or salt mist.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCare:\u003c\/strong\u003e Inspect the heater before use and have a qualified, licensed person check it at least once a year; servicing is done with the power disconnected. Clean the housing regularly with a soft, damp cloth, every two weeks in coastal areas where salt air can rust metal. Keep dust off the reflector and elements, because buildup causes overheating and early element failure: turn the heater off, wait at least 2 hours, then wipe them with a soft, dry cloth. If the heat seems too low, Bromic's checklist points to a heater that is too small, mounted too high or far, or on the wrong voltage; a hot spot on a tube usually means the heater is not level or the tube has grease or moisture on it. Stop using the heater if you suspect damage, and have a licensed person replace a damaged supply cord. Bromic says it is not designed for continuous overnight use; switch it off or use a timer or controls.\u003c\/p\u003e\n\u003ch3 id=\"warranty\"\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBromic covers the Tungsten Smart-Heat Electric heater for 2 years and its heating elements for 7 years. Coverage is for the original owner only: Bromic or its agent supplies a replacement heater or a replacement for the failed part. The owner pays for labor to service, remove and reinstall the heater, shipping to and from the distributor, handling and administrative charges, and any materials or permits needed to install the replacement. Implied warranties are limited to one year.\u003c\/p\u003e\n\u003cp\u003eThe manual states that mounting the heater vertically, or installing the cord grip or conduit fittings incorrectly, voids the warranty. Start a claim with the dealer who sold you the heater; keep your proof of purchase.\u003c\/p\u003e\n\u003ch3 id=\"manuals\"\u003eManuals and documents\u003c\/h3\u003e\n\u003cul class=\"mnk-docs\"\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/pim.bromic.com\/wp-content\/uploads\/2021\/07\/Bromic-Tungsten-Smart-Heat-Electric-Instruction-Manual-US.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTungsten Smart-Heat Electric installation, instruction and service manual, US, 1125_v1 (PDF)\u003c\/a\u003e \u003cspan class=\"mnk-docs__meta\"\u003eModel table, in-box parts, clearances, bracket, chain, tube and recess mounting, element fitting, wiring, care, troubleshooting, spare part numbers\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/pim.bromic.com\/wp-content\/uploads\/2026\/02\/Product-Cut-Sheet-Tungsten-Electric-1.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTungsten Smart-Heat Electric product cut sheet (PDF)\u003c\/a\u003e \u003cspan class=\"mnk-docs__meta\"\u003eModels, rated current, weights, mounting heights, ETL listing, IPX4\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.bromic.com\/product\/tungsten-smart-heat-electric\/\" target=\"_blank\" rel=\"noopener\"\u003eBromic Tungsten Smart-Heat Electric product page\u003c\/a\u003e \u003cspan class=\"mnk-docs__meta\"\u003ePart numbers by voltage and color, materials, controls, clearances, FAQ\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.bromic.com\/warranty\/\" target=\"_blank\" rel=\"noopener\"\u003eBromic warranty terms\u003c\/a\u003e \u003cspan class=\"mnk-docs__meta\"\u003eWarranty periods by product line\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 id=\"legal\"\u003eLegal disclaimers and warnings\u003c\/h3\u003e\n\u003cp class=\"mnk-legal\"\u003eProduct packaging, owners' manuals, installation instructions, and\/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product.\u003c\/p\u003e\n\u003cp class=\"mnk-legal\"\u003eWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003c\/p\u003e\n","brand":"Bromic Heating","offers":[{"title":"240V \/ Black","offer_id":68167510327575,"sku":"BH0420032-2","price":991.0,"currency_code":"USD","in_stock":true},{"title":"240V \/ White","offer_id":68167510360343,"sku":"BH0420012-2","price":1023.0,"currency_code":"USD","in_stock":true},{"title":"208V \/ Black","offer_id":68167510393111,"sku":"BH0420034-2","price":1055.0,"currency_code":"USD","in_stock":true},{"title":"208V \/ White","offer_id":68167510425879,"sku":"BH0420037-2","price":1075.0,"currency_code":"USD","in_stock":true},{"title":"277V \/ Black","offer_id":68167510458647,"sku":"BH0420042-2","price":1055.0,"currency_code":"USD","in_stock":true},{"title":"277V \/ White","offer_id":68167510491415,"sku":"BH0420044-2","price":1075.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1251\/8981\/files\/bromic-tungsten-smart-heat-electric-4000w-patio-heater-bh0420032-2-bh0420012-2-bh0420034-2-and.jpg?v=1794343456"},{"product_id":"bromic-tungsten-smart-heat-electric-6000w-patio-heater","title":"Bromic Tungsten Smart-Heat Electric 6000W Patio Heater","description":"\u003ch2 id=\"description\" data-mnk-layout=\"1\"\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe Bromic Tungsten Smart-Heat Electric 6000W is a 56 in. long infrared heater with two quartz tube elements behind a honeycomb mesh front. Each element is a thick steel coil inside translucent fused quartz, backed by a mirror-finish anodized reflector, and the two elements can be switched separately so you can run one element or both. The body is stainless steel with a high-temperature, corrosion-resistant coating in black or white, rated IPX4 for covered outdoor areas such as patios, pergolas, restaurant terraces and bars.\u003c\/p\u003e\n\u003cp\u003eChoose the supply and finish above: 220-240V (BH0420033 black, BH0420013 white), 208V (BH0420035 black, BH0420036 white) or 277V (BH0420043 black, BH0420045 white); our SKUs add a -2 suffix. Bromic notes that 220-240V is single phase and typical of homes, while 208V is three phase and typical of commercial buildings. The heater mounts on a wall or ceiling with the two 9.5 in. brackets supplied, hangs on the \u003ca href=\"\/products\/bromic-tungsten-electric-tube-suspension-kit\"\u003eTungsten Electric tube suspension kit\u003c\/a\u003e, or sits flush with the \u003ca href=\"\/products\/bromic-tungsten-electric-ceiling-recess-kit\"\u003eTungsten Electric ceiling recess kit\u003c\/a\u003e. Control it with an \u003ca href=\"\/products\/bromic-affinity-smart-heat-on-off-controller\"\u003eAffinity On\/Off controller\u003c\/a\u003e, an \u003ca href=\"\/products\/bromic-affinity-smart-heat-dimmer-controller\"\u003eAffinity Dimmer controller\u003c\/a\u003e or the \u003ca href=\"\/products\/bromic-manual-wall-switch-heater-kit\"\u003emanual wall switch kit\u003c\/a\u003e. For a 44 in. heater, see the \u003ca href=\"\/products\/bromic-tungsten-smart-heat-electric-4000w-patio-heater\"\u003eTungsten Electric 4000W\u003c\/a\u003e; for a single-element 56 in. heater, the \u003ca href=\"\/products\/bromic-tungsten-smart-heat-electric-3000w-patio-heater\"\u003e3000W\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003ePlan before ordering: the heater is hard-wired by a licensed electrician to a grounded supply with a means of disconnection in the fixed wiring, using 90°C-rated supply wire. Mount the heater surface at least 96 in. above the floor (Bromic's cut sheet allows 72 in. on a wall in the US), keep 3 ft clear in front of it, and mount it with the elements horizontal, never vertically. Controls and recess or suspension kits are sold separately.\u003c\/p\u003e\n\u003cul class=\"mnk-glance\"\u003e\n\u003cli\u003e\n\u003cstrong class=\"mnk-glance__label\"\u003eOutput:\u003c\/strong\u003e 6000W, two elements\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong class=\"mnk-glance__label\"\u003eVoltage:\u003c\/strong\u003e 220-240V, 208V or 277V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong class=\"mnk-glance__label\"\u003eSize:\u003c\/strong\u003e 56 x 8.5 x 3.5 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong class=\"mnk-glance__label\"\u003eWeight:\u003c\/strong\u003e 22 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong class=\"mnk-glance__label\"\u003eRating:\u003c\/strong\u003e IPX4, ETL \/ cETL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"features\"\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6000W from two quartz tube elements:\u003c\/strong\u003e wire them to separate switches or controller channels to run one element or both.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoft-glow infrared element:\u003c\/strong\u003e radiant heat with no harsh glare, directed with the adjustable brackets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMirror-finish anodized reflector:\u003c\/strong\u003e Bromic's parabolic specular reflector directs the heat forward.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless body, IPX4:\u003c\/strong\u003e high-temperature, corrosion-resistant coating in black or white, with a honeycomb mesh front.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable 9.5 in. brackets:\u003c\/strong\u003e wall or ceiling mounting, rotated to the angle you need and locked with a screw.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour mounting methods:\u003c\/strong\u003e wall, ceiling, tube suspension or flush ceiling recess, plus chain suspension.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo ventilation needed:\u003c\/strong\u003e an electric heater has no combustion, so it suits covered and enclosed-roof patios.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"specifications\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"mnk-specs\"\u003e\u003ctbody\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eIdentification\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eBromic Heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eTungsten Smart-Heat Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart numbers, 220-240V\u003c\/th\u003e\n\u003ctd\u003eBH0420033 (black), BH0420013 (white)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart numbers, 208V\u003c\/th\u003e\n\u003ctd\u003eBH0420035 (black), BH0420036 (white)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart numbers, 277V\u003c\/th\u003e\n\u003ctd\u003eBH0420043 (black), BH0420045 (white)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003ePerformance\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeat output\u003c\/th\u003e\n\u003ctd\u003e6000W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElements\u003c\/th\u003e\n\u003ctd\u003e2 quartz tube elements, separately switchable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eReflector\u003c\/th\u003e\n\u003ctd\u003eMirror-finish anodized (parabolic specular)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl\u003c\/th\u003e\n\u003ctd\u003eAffinity On\/Off, Affinity Dimmer, manual wall switch, or hard-wired\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eElectrical\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCurrent, 220-240V\u003c\/th\u003e\n\u003ctd\u003e25 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCurrent, 208V\u003c\/th\u003e\n\u003ctd\u003e28.85 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCurrent, 277V\u003c\/th\u003e\n\u003ctd\u003e21.66 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnection\u003c\/th\u003e\n\u003ctd\u003eHard-wired, grounded; element 1 on L1\/N1, element 2 on L2\/N2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupply wire\u003c\/th\u003e\n\u003ctd\u003eCopper or aluminum, rated 90°C (194°F) minimum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJunction box entry\u003c\/th\u003e\n\u003ctd\u003e22 mm (0.86 in.) to standard 1\/2 in. weatherproof conduit fitting; IPX4 cord grip rated 90°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eSize and build\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e56 x 8.5 x 3.5 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e22 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMounting brackets\u003c\/th\u003e\n\u003ctd\u003e9.5 in., two supplied\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eStainless steel, high-temperature corrosion-resistant coating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFront\u003c\/th\u003e\n\u003ctd\u003eHoneycomb mesh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColors\u003c\/th\u003e\n\u003ctd\u003eBlack or white\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eClearances\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMinimum mounting height\u003c\/th\u003e\n\u003ctd\u003eHeater surface 96 in. above the floor (required for cETL); cut sheet: wall 72 in., ceiling 96 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eIn front of the heater\u003c\/th\u003e\n\u003ctd\u003e3 ft (900 mm) clear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCombustible materials\u003c\/th\u003e\n\u003ctd\u003e3 ft from the front; keep them clear of the sides and rear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBetween heaters\u003c\/th\u003e\n\u003ctd\u003e20 in. from heater edge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeater face to ceiling, tube suspension\u003c\/th\u003e\n\u003ctd\u003e13 in. minimum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCeiling recess box length\u003c\/th\u003e\n\u003ctd\u003e57.5 in. minimum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBasis\u003c\/th\u003e\n\u003ctd\u003eSurface temperature of 117°F above room temperature\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"mnk-specs__group\"\u003e\u003cth colspan=\"2\" scope=\"colgroup\"\u003eCompliance and use\u003c\/th\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eListing\u003c\/th\u003e\n\u003ctd\u003eIntertek ETL \/ cETL 4005951\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWater ingress\u003c\/th\u003e\n\u003ctd\u003eIPX4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUse\u003c\/th\u003e\n\u003ctd\u003eIndoor and covered outdoor spot heating, residential or commercial\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 years heater, 7 years heating elements\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cdiv class=\"mnk-kit\"\u003e\n\u003cdiv class=\"mnk-kit__col\"\u003e\n\u003ch3 id=\"whats-included\"\u003eWhat's included\u003c\/h3\u003e\n\u003cul class=\"mnk-included\"\u003e\n\u003cli\u003eTungsten Smart-Heat Electric heater with front cover and protective element end caps\u003c\/li\u003e\n\u003cli\u003eTwo tube elements and the element bracket\u003c\/li\u003e\n\u003cli\u003eTwo 9.5 in. wall or ceiling mounting brackets\u003c\/li\u003e\n\u003cli\u003eMounting and assembly hardware: M5 screws, self-tapping screws, nuts and washers\u003c\/li\u003e\n\u003cli\u003eInstallation, instruction and service manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot included: fasteners into the wall or ceiling, controls, chains, and recess or suspension kits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mnk-kit__col\"\u003e\n\u003ch3 id=\"sold-separately\"\u003eSold separately\u003c\/h3\u003e\n\u003cul class=\"mnk-optional\"\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-tungsten-electric-ceiling-recess-kit\"\u003eTungsten Electric ceiling recess kit\u003c\/a\u003e, 3000W\/6000W size: BH8180011 black, BH8180095 white; mounts the heater flush in a ceiling box\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-tungsten-electric-tube-suspension-kit\"\u003eTungsten Electric tube suspension kit\u003c\/a\u003e, 3 ft: BH8180012 black (white: see the kit page); hangs the heater 39.39 in. below the ceiling, angled 15, 30 or 45 degrees\u003c\/li\u003e\n\u003cli\u003eShort mounting brackets for wall mounting closer to the wall: BH8180008 black, BH8180021 white (ask us)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-affinity-smart-heat-on-off-controller\"\u003eAffinity Smart-Heat On\/Off controller\u003c\/a\u003e, 1, 2 or 5 channel (BH3130051\/52\/53): full-power control, 6000W per channel\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-affinity-smart-heat-dimmer-controller\"\u003eAffinity Smart-Heat Dimmer controller\u003c\/a\u003e, 1, 2 or 5 channel (BH3130061\/62\/63): adjustable heat, 6000W per channel\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bromic-affinity-smart-heat-expansion-board\"\u003eAffinity Smart-Heat expansion board (BH3130070)\u003c\/a\u003e: BMS or Ethernet connection for Affinity controllers\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bromic-manual-wall-switch-heater-kit\"\u003eManual wall switch heater kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eReplacement elements: 240V BH8180002, 208V BH8180016, 277V BH8180014; front cover BH8180004 black, BH8180019 white; long bracket set BH8180009 black, BH8180022 white; junction box cover and seal set BH8180007 black, BH8180020 white (ask us)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 id=\"installation\"\u003eInstallation planning\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstaller:\u003c\/strong\u003e permanent installation and hard-wiring by a licensed, authorized person to local electrical and building codes, on a properly grounded supply that matches the rating label. Disconnect power before installing or servicing, and build a means of disconnection into the fixed wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e element 1 connects to L1\/N1 and element 2 to L2\/N2, so the elements can run together or independently. Bromic's diagram shows the 6000W on two 20 A wall switches, one per element. With an Affinity controller, the two hot legs pair L1\/L2 and N1\/N2; follow the Affinity manual. Use 90°C-rated wire, an IPX4 cord grip rated 90°C and IPX4 conduit fittings outdoors; the ground screw is in the end of the junction box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrientation:\u003c\/strong\u003e the tube elements must be horizontal. Vertical mounting makes the elements sag and burn out early, and voids the warranty.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrackets:\u003c\/strong\u003e fasten the brackets to the wall or ceiling (fasteners not supplied), lock the heater on with an M5 x 10 screw and nut, rotate it to the angle you want and lock it with a self-tapping screw. Short brackets (sold separately) bring the heater closer to a wall.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube or chain suspension:\u003c\/strong\u003e the 3 ft tubes put the heater surface 39.39 in. below the ceiling and can be cut shorter (drill new holes); keep at least 13 in. from the heater face to the ceiling and 96 in. to the floor. For chains, the installer sizes them for the heater's 22 lb and fixes them with crimped S-hooks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCeiling recess:\u003c\/strong\u003e the installer builds a ceiling box at least 57.5 in. long from cement board or similar and lines joists above it with fireproof insulation; the electrical connection is made outside the box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearances:\u003c\/strong\u003e 3 ft clear in front, combustibles kept 3 ft from the front and clear of the sides and rear (Bromic includes nearby ceiling fans), and 20 in. between heaters. Protect nearby low-heat materials such as vinyl siding, canvas or plastic.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlacement limits:\u003c\/strong\u003e do not aim the heater at the ceiling or mount it directly below or in front of a wall power socket. Not for bathrooms, laundries, wardrobes, RVs or boats, not near a bathtub, shower or pool (switches and controls must be out of reach of anyone using them), and not where gasoline, paint or other flammable liquids or vapors are used or stored.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather:\u003c\/strong\u003e outdoors, mount it with the face angled down and under cover where possible. Bromic advises against direct exposure to rain, snow or salt mist.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCare:\u003c\/strong\u003e Inspect the heater before use and have a qualified, licensed person check it at least once a year; servicing is done with the power disconnected. Clean the housing regularly with a soft, damp cloth, every two weeks in coastal areas where salt air can rust metal. Keep dust off the reflector and elements, because buildup causes overheating and early element failure: turn the heater off, wait at least 2 hours, then wipe them with a soft, dry cloth. If the heat seems too low, Bromic's checklist points to a heater that is too small, mounted too high or far, or on the wrong voltage; a hot spot on a tube usually means the heater is not level or the tube has grease or moisture on it. Stop using the heater if you suspect damage, and have a licensed person replace a damaged supply cord. Bromic says it is not designed for continuous overnight use; switch it off or use a timer or controls.\u003c\/p\u003e\n\u003ch3 id=\"warranty\"\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBromic covers the Tungsten Smart-Heat Electric heater for 2 years and its heating elements for 7 years. Coverage is for the original owner only: Bromic or its agent supplies a replacement heater or a replacement for the failed part. The owner pays for labor to service, remove and reinstall the heater, shipping to and from the distributor, handling and administrative charges, and any materials or permits needed to install the replacement. Implied warranties are limited to one year.\u003c\/p\u003e\n\u003cp\u003eThe manual states that mounting the heater vertically, or installing the cord grip or conduit fittings incorrectly, voids the warranty. Start a claim with the dealer who sold you the heater; keep your proof of purchase.\u003c\/p\u003e\n\u003ch3 id=\"manuals\"\u003eManuals and documents\u003c\/h3\u003e\n\u003cul class=\"mnk-docs\"\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/pim.bromic.com\/wp-content\/uploads\/2021\/07\/Bromic-Tungsten-Smart-Heat-Electric-Instruction-Manual-US.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTungsten Smart-Heat Electric installation, instruction and service manual, US, 1125_v1 (PDF)\u003c\/a\u003e \u003cspan class=\"mnk-docs__meta\"\u003eModel table, in-box parts, clearances, bracket, chain, tube and recess mounting, element fitting, wiring, care, troubleshooting, spare part numbers\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/pim.bromic.com\/wp-content\/uploads\/2026\/02\/Product-Cut-Sheet-Tungsten-Electric-1.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTungsten Smart-Heat Electric product cut sheet (PDF)\u003c\/a\u003e \u003cspan class=\"mnk-docs__meta\"\u003eModels, rated current, weights, mounting heights, ETL listing, IPX4\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.bromic.com\/product\/tungsten-smart-heat-electric\/\" target=\"_blank\" rel=\"noopener\"\u003eBromic Tungsten Smart-Heat Electric product page\u003c\/a\u003e \u003cspan class=\"mnk-docs__meta\"\u003ePart numbers by voltage and color, materials, controls, clearances, FAQ\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.bromic.com\/warranty\/\" target=\"_blank\" rel=\"noopener\"\u003eBromic warranty terms\u003c\/a\u003e \u003cspan class=\"mnk-docs__meta\"\u003eWarranty periods by product line\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 id=\"legal\"\u003eLegal disclaimers and warnings\u003c\/h3\u003e\n\u003cp class=\"mnk-legal\"\u003eProduct packaging, owners' manuals, installation instructions, and\/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product.\u003c\/p\u003e\n\u003cp class=\"mnk-legal\"\u003eWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003c\/p\u003e\n","brand":"Bromic Heating","offers":[{"title":"240V \/ Black","offer_id":68167510589719,"sku":"BH0420033-2","price":1161.0,"currency_code":"USD","in_stock":true},{"title":"240V \/ White","offer_id":68167510622487,"sku":"BH0420013-2","price":1182.0,"currency_code":"USD","in_stock":true},{"title":"208V \/ Black","offer_id":68167510655255,"sku":"BH0420035-2","price":1214.0,"currency_code":"USD","in_stock":true},{"title":"208V \/ White","offer_id":68167510688023,"sku":"BH0420036-2","price":1246.0,"currency_code":"USD","in_stock":true},{"title":"277V \/ Black","offer_id":68167510720791,"sku":"BH0420043-2","price":1214.0,"currency_code":"USD","in_stock":true},{"title":"277V \/ White","offer_id":68167510753559,"sku":"BH0420045-2","price":1246.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1251\/8981\/files\/bromic-tungsten-smart-heat-electric-6000w-patio-heater-bh0420033-2-bh0420013-2-bh0420035-2-and.jpg?v=1794343456"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1251\/8981\/collections\/bromic-recessed-heaters-platinum-electric-recessed.jpg?v=1794168459","url":"https:\/\/mnkgrills.com\/collections\/bromic-recessed-heaters.oembed","provider":"M\u0026K Grills","version":"1.0","type":"link"}