









Features
- Gas, charcoal or wood: patented 14-gauge #304 fuel trays sit over the burners for solid-fuel cooking.
- 8 gas burners: 14-gauge #304 stainless tube burners under 14-gauge #304 burner covers.
- Rotisserie and sear burner included: 100 lb capacity rotisserie kit with spit storage, plus a drop-in infrared sear burner.
- Reversible 9-gauge V-shaped grates: #304 stainless, with #304 heat zone separators.
- Adjustable hood vents: on a 16-gauge double-lined, spring-assisted hood with a US-made temperature gauge.
- Easy-clean drip pan: with a drain system.
- Lit for evening cooking: interior halogen lights and LED lights over each knob.
- Flame thrower ignition: with a flash tube backup.
- Made in the USA: built, factory tested and serviced in the USA; tested to ANSI Z21.58 / CSA 1.6.
Specifications
| Brand | American Made Grills |
|---|---|
| Series | Hybrid (Muscle) |
| Model | MUS54-NG (natural gas) / MUS54-LP (propane) |
| Width | 54" |
| Cut-out | 53-1/4" W x 25" D x 15" H |
| Gas burners | 8, 14-gauge #304 stainless steel tube |
| Solid fuel | Charcoal, wood chunks or chips in 14-gauge fuel trays |
| Cooking surface | 1,687 sq. in. total, including a 548 sq. in. upper warming rack |
| Cooking grates | Reversible #304 9-gauge V-shaped |
| Hood | 16-gauge double-lined, spring assisted, adjustable vents |
| Lighting | Interior halogen; LED over each knob |
| Ignition | Flame thrower |
| Construction | #304 stainless steel |
| Gas | Natural gas or propane |
| Gas pressure | NG 4" to 7" w.c.; LP 11" to 14" w.c. |
| Electrical | 120 V, 60 Hz, 15 A GFCI outlet |
| Certification | ANSI Z21.58 / CSA 1.6 |
| Made in | USA |
What's included
- 54" built-in hybrid grill head
- Fuel trays and burner covers
- Cooking grates and warming rack
- 100 lb capacity rotisserie kit
- Drop-in infrared sear burner
- Stainless steel griddle plate
- Grate lifting tools
- Leather glove set
- Fuel kit (wood and charcoal)
- Cleaning care kit
- Weather-proof vinyl head cover
Installation planning
- Cut-out: 53-1/4" W x 25" D x 15" H.
- The island must be built from non-combustible material. In a combustible island an American Made Grills grill liner is required: the GL-HYB54.
- Side and rear clearances: at least 4" from a non-combustible wall or backsplash, 14" from a protected combustible wall (a non-combustible face over a combustible wall), and 18" from a combustible wall. The 4" backsplash clearance has to be met before any wall behind it.
- Keep at least 5 feet between the countertop and any overhead construction, and never install under unprotected combustible overhead construction. Under combustible overhead construction the cooking area must be covered by an exhaust hood larger than the cooking area and moving at least 1,200 CFM; under non-combustible overhead construction a hood is highly recommended.
- Outdoors only. Never use it in a garage, building, shed, breezeway or other enclosed area, or in or on a recreational vehicle or boat.
- Gas supply pressure: natural gas 4" to 7" water column, propane 11" to 14" water column. Natural gas models use the supplied regulator set to 4" w.c.; propane models use an LP regulator set to 11" w.c. Never connect the grill to an unregulated supply.
- Size the gas line for the total BTU of every appliance on it, never smaller than 1/2" inside (1" outside) diameter, and keep it as short as possible: pressure drops with distance and with every elbow or tee. Running a grill and a side burner from one line takes a tee fitting (not supplied). Don't put tape, pipe dope or thread compound on flare fittings. American Made Grills recommends a licensed gas professional for all gas plumbing; a "T"-handle manual shut-off valve is required on permanent gas lines (Massachusetts requires a licensed plumber or gas fitter).
- Propane: use a standard 20 lb DOT cylinder with a Type 1 (QCC-1) valve and an overfill prevention device, no larger than about 12-1/4" across and 18" tall (not included). Never fill it past 80%, never store a spare cylinder under or near the grill, and keep cylinders outdoors, upright and away from heat. Propane is heavier than air, so vent an enclosure on opposite sides near the bottom.
- Leak-test every connection with 1 part soap to 3 parts water before first use and after every cylinder change. Growing bubbles mean a leak: shut off the gas and fix it before use. Never test with a flame.
- Level it in every direction; a grill out of level burns erratically and heats unevenly.
- Power: the lights, ignition and optional rotisserie motor need a 120 V, 60 Hz, 15 A GFCI-protected outdoor outlet installed by a qualified electrician; the grill must be electrically grounded.
- Weight: these grills ship at 250 lb or more, and the largest at over 400 lb. Plan for at least two people, and lift it by the frame, never the hood.
- The grill draws air in at the front and vents out the back of the hood. Don't grill with wind blowing into the rear: the control panel and knobs can get very hot.
- Keep stainless steel away from construction dust (stone dust, stucco, lime) and pool chemicals, which can permanently discolor it. Note visible box damage on the delivery receipt, and report hidden damage to the carrier within 5 days, keeping the carton.
Use and care
Light gas burners with the hood open. For charcoal or wood, keep the hood open while the fire starts, use the grate lifting tool to load or move the fuel trays (never with your hands on a hot grill), and never fill the trays past their rim: an overfilled tray overheats the grill, and that damage is not covered by the warranty. Use the adjustable hood vents to control airflow when smoking or cooking with charcoal and wood. Empty the trays and the drip tray once the grill is cold; the drip tray has a drain plug for oils and liquids, and should be checked for rain water before you pull it out. Clean clogged burner ports with a wire or brush, and check the burners, venturis and orifices at least once a year, since debris or insects can block them during long periods of non-use. Clean the stainless steel along the grain with a stainless steel cleaner, never metal abrasives, and keep the grill covered when not in use.
Warranty
Gold Standard Lifetime Warranty, with replacement parts 100% non-prorated: lifetime on construction and manufacturer defects, the stainless steel construction, cooking grates, burners, burner covers, valves, flame tamers, heat zone separators, temperature gauges, hood springs and briquette systems; 3 years on all other parts, components and electrical, including LED bulbs, wire harness, switches, power source wire, transformer and the interior halogen light wire and bulb. Register the product online with American Made Grills within 30 days of purchase to validate the warranty. It covers the original purchaser at the original site of delivery, with proof of purchase and photos, and ends if ownership transfers. Claims supply replacement parts only, not labor. It does not cover discoloration, surface rust, corrosion or oxidation from harsh environments, chemicals or overheating, or damage from improper installation, abuse, extreme environments, grease fires or misuse; proof of regular maintenance is required, and coastal, humid or salt-air locations are reviewed case by case. Report damage found out of the box within 30 days of purchase and before installation.
Manuals and documents
Legal disclaimers and warnings
Product packaging, owners' manuals, installation instructions, and/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product. WARNING for California residents: this product can expose you to chemicals including chromium, which is known to the State of California to cause cancer and birth defects or other reproductive harm.