


Features
- Made for Blaze 32-inch 4-burner grills: the jacket Blaze lists for its 4-burner Prelude LBM and Premium LTE built-in grills.
- Required for combustible islands: the Premium LTE+ and LTE grill manual makes a Blaze insulated jacket mandatory when the outdoor kitchen is built of combustible material.
- Self-supporting ledge: a ledge around the sides and back supports the grill in the opening.
- Stainless steel construction: made for outdoor kitchens and gives the opening a finished stainless look.
- Lifetime warranty: Blaze covers its insulated jackets against defects in manufacturing and workmanship for the original purchaser.
Specifications
| Brand | Blaze |
|---|---|
| Model | BLZ-4-IJ |
| Type | Insulated jacket for a built-in gas grill; grill not included |
| Fits (per Blaze) | Blaze 4-burner Prelude LBM and Premium LTE built-in gas grills; the Premium LTE+ and LTE grill manual (7/16/2025) gives BLZ-4LTE2 and BLZ-4LTE3 the same 32-inch cut-out |
| Not for | LTE PRO 32-inch (use BLZ-4-IJ2) and Professional LUX grills (use BLZ-3PRO-IJ or BLZ-4PRO-IJ); fit on BLZ-4BCM not stated by Blaze |
| Overall height | 9-3/4" |
| Overall width and depth | Being confirmed with Blaze (published sources differ) |
| Island cut-out width for the jacket | 33" |
| Island cut-out depth and height | Being confirmed with Blaze (published sources differ); ask us before framing |
| Cut-out note | A 1/4" to 1/2" gap below the jacket is possible (Blaze) |
| Grill cut-out without a jacket | 30-5/8" W x 21-1/4" D x 8-1/2" H (32-inch Premium LTE+ / LTE, grill manual) |
| Support | Self-supporting ledge around the sides and back |
| Material | Stainless steel |
| Use | Required for installation in a combustible enclosure |
| Warranty | Lifetime against defects in manufacturing and workmanship (original purchaser, single-family home use) |
What's included
- One stainless steel insulated jacket for 32-inch 4-burner Prelude LBM and Premium LTE grills (BLZ-4-IJ)
Blaze publishes no packing list, hardware count or weight for this jacket. The grill is sold separately.
Sold separately
- Premium LTE+ 32-inch built-in grill (BLZ-4LTE3): a grill this jacket is made for.
- Premium LTE3 Marine Grade 32-inch grill (BLZ-4LTE3MG): the marine grade version of the 32-inch Premium LTE+ grill.
- Cover for Prelude LBM and Premium LTE 4-burner built-in grills (4BICV): protects the grill head in the island.
- Stainless island vent panel (BLZ-ISLAND-VENT): a stainless cover for the island vents the grill manual requires.
Installation planning
- Cut the island opening for the jacket, not the grill: 33" wide, with the depth and height we confirm for you (a 1/4" to 1/2" gap below the jacket is possible). Set the jacket in, then lower the grill into it with a second person.
- A licensed professional contractor should install the jacket, and a licensed gas professional should make every gas connection. Blaze prohibits a rubber gas line connected directly to the appliance inside the jacket, even one supplied with it: use a stainless steel flex line. Different fittings or a gas pipe extension may be needed so the line does not kink and no excess line is left inside the jacket.
- The jacket protects the combustible structure below the cooking surface only. The appliance's own clearances above, behind and beside it still apply (see its manual).
- Leak-test every gas connection as the final step and correct any leak before use.
- Grill clearances (Premium LTE+ and LTE grill manual, 7/16/2025): 18" from combustible construction at the sides and back, 4" from non-combustible construction; never under combustible overhead construction; under a non-combustible overhead, 72" with a vent hood. Cut a 1" air gap in the front face of the countertop below the control panel. Prelude LBM owners should follow the clearances in the LBM use and care guide.
- Island vents on both sides: propane is heavier than air and needs lower vents within 1" of the island floor; natural gas rises and needs upper vents within 5" of the island top, with at least 1 sq. in. of free area per lb of stored fuel per vent.
- Gas: the manual recommends a flex connector of at least 5/8" diameter and requires an installer-supplied shut-off valve in an accessible place. Maximum inlet pressure is 14" w.c. for natural gas and propane.
- Electrical: the grill's lights need a 15-amp breaker with GFI protection.
Warranty
Blaze states that its insulated jackets are covered by a lifetime warranty against defects in manufacturing and workmanship. The warranty extends to the original purchaser and applies to products bought for ordinary single-family home use. Blaze's product page gives no further conditions or exclusions for the jacket; the grill you set in it carries its own warranty, set out in its manual. Register the product with Blaze after delivery.
Manuals and documents
- Blaze product page: Insulated Jackets for Gas Grills (all sizes)
- Blaze insulated jacket installation (PDF)
- Blaze Premium LTE+ and LTE grill manual, version 7/16/2025 (covers BLZ-4LTE2, 4LTE3, 5LTE2, 5LTE3) (PDF)
- Blaze product registration
Legal disclaimers and warnings
Product packaging, owners' manuals, installation instructions, and/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product. WARNING: This product can expose you to chemicals including chromium (hexavalent compounds), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
