Firegear Square Fire Pit Burners

Firegear square fire pit burner systems combine a square pan, a Pro Series brass spur burner and TPSI safety ignition in one kit. Drop-in pans run from 20 to 32 inches and flat pans from 25 to 34 inches, each sold as a natural gas or propane model for square pits and tables.

12 products

Firegear square burner sizes

Each size is sold in a natural gas (-N) and a propane (-P) version. Pan size, pan type and spur length come from the Firegear model numbers.

Pan Pan type Brass spur Ignition Natural gas Propane
20-inch Drop-in 14-inch TPSI FPB-20SPSBR14TPSI-N FPB-20SPSBR14TPSI-P
25-inch Flat 21-inch TPSI FPB-25SFPSBR21TPSI-N FPB-25SFPSBR21TPSI-P
26-inch Drop-in 21-inch TPSI FPB-26SPSBR21TPSI-N FPB-26SPSBR21TPSI-P
30-inch Flat 21-inch TPSI FPB-30SFPSBR21TPSI-N FPB-30SFPSBR21TPSI-P
32-inch Drop-in 21-inch TPSI FPB-32SPSBR21TPSI-N FPB-32SPSBR21TPSI-P
34-inch Flat 21-inch TPSI FPB-34SFPSBR21TPSI-N FPB-34SFPSBR21TPSI-P

Choosing a square Firegear burner

  • Measure the opening: pick the pan that fits inside your square pit or table. Cut-out dimensions for each pan are in its Firegear manual.
  • Drop-in or flat: the two pan types install differently; send us photos of your build and we will confirm the right one.
  • Gas: natural gas and propane are separate models.
  • Building from scratch? Firegear makes square ready-to-finish enclosures in 42, 48 and 60-inch sizes.

Go back to all Firegear products, or compare fire pit burners and components from every brand. Not sure which size fits your fire pit? Send us your measurements and photos and we will help.

Firegear square burner FAQ

What size square burner do I need?

Measure the inside of your fire pit opening and choose the pan that fits. The Firegear square systems we carry come in 20, 25, 26, 30, 32 and 34-inch pans. Confirm the cut-out with the Firegear manual, or send us your measurements.

How does Firegear TPSI ignition work?

TPSI stands for Thermocouple Piloted Safety Ignition. Firegear says the thermocouple-piloted safety valve turns the gas off if the flame is lost, and a battery spark igniter is included. You hold the igniter button, press and turn the knob to pilot, keep the knob pressed 30 to 60 seconds, then turn it to ON once the pilot is lit.

Can I convert a Firegear burner from propane to natural gas?

Order the gas type you have, because each Firegear system on this page is sold as a separate natural gas or propane model. Firegear sells propane conversion kits matched to burner BTU, but whether your model can be converted, and who must do it, is set by its manual. Confirm with us before ordering.

What clearances and venting does a Firegear burner need?

Clearances to combustibles, enclosure ventilation and fire media depth are set in the Firegear installation and operating manual for each burner system. We could not confirm those figures for this page, so confirm with us before you build: we will send the Firegear manual for your exact model, and the manual's requirements govern the install.

What warranty do Firegear Pro Series burners have?

Firegear states that its Pro Series burners carry a limited lifetime warranty on parts and components. Terms and exclusions are in Firegear's warranty document; confirm with us for the coverage on your model.

All Firegear products