

Features
- Telescoping height, 22" to 41": the upper chimney extends to sit flush against the higher ceiling.
- 48" W x 18" D: sized to match the Blaze 48-inch vent hood.
- Heavy-duty 304 stainless steel: built for year-round outdoor use.
- Hides the ductwork: covers the ducts between hood and ceiling for a finished look.
- Bracket mount: a mounting bracket holds the upper chimney at the ceiling, and the cover screws onto the hood.
Specifications
| Brand | Blaze |
|---|---|
| Model | BLZ-48-VHOOD-DCVR-22 |
| Type | Extendable vent hood duct cover, high ceiling |
| Fits | Blaze 48-inch outdoor vent hood (Blaze names no specific hood model number) |
| Width | 48" |
| Depth | 18" |
| Height range | 22" to 41" (telescoping) |
| Material | Heavy-duty 304 stainless steel |
| Mounting | Mounting bracket; screws to the bracket and to the hood |
| Matching low-ceiling model | BLZ-48-VHOOD-DCVR-12 (12" to 22-1/2") |
| Warranty | Not stated for this product by Blaze (see below) |
What's included
- Duct cover with telescoping upper chimney
- Mounting bracket
Blaze's installation guide shows these parts and the mounting screws but gives no part numbers, quantities or packing list.
Sold separately
- Blaze 48-inch outdoor vent hood (BLZ-48-VHOOD2): the hood this cover sits on; ducting is planned per the hood manual.
- Blaze low-ceiling duct cover for 48-inch hoods (BLZ-48-VHOOD-DCVR-12): for a 12" to 22-1/2" gap.
- Blaze island vent panel (BLZ-ISLAND-VENT): Blaze lists it as a related item; vents the island below.
- Blaze stainless steel outdoor kitchen island (BLZ-SS-ISLAND-RO): Blaze lists it as a related item.
Installation planning
- Measure the gap from the top of the hood to the ceiling. This cover telescopes from 22" to 41"; use the BLZ-48-VHOOD-DCVR-12 for 12" to 22-1/2".
- Blaze's installation guide: install the mounting bracket, extend the upper chimney until it sits flush against the ceiling, screw the chimney to the bracket, then screw the cover onto the range hood.
- Hood mounting height, duct size and duct routing come from the vent hood manual: the Blaze 48-inch hood manual calls for 36" to 40" between the top of the cooking surface and the bottom of the hood (never less than 36"). The BLZ-48-VHOOD2 has two 8" outlets, and its manual calls for two separate duct runs, each to its own exterior cap; route both before the cover goes on. The hood and its ducting should be in place before the cover is fitted.
- Vent to the outdoors only: the hood manual says never to vent into an attic or other enclosed area.
- Blaze does not publish a weight, ceiling-material requirements or clearance figures for the cover, and its catalog says dimensions can change. Ask us before ordering if you need confirmed figures.
Warranty
Blaze's duct cover product page and the January 2026 catalog state no warranty term for this cover, and Blaze publishes no terms, conditions or exclusions for it. The vent hood carries its own warranty, stated in the hood manual. Register the product with Blaze after delivery.
Manuals and documents
- Blaze product page: Extendable Vent Hood Duct Covers (BLZ-36/42/48-VHOOD-DCVR-12/22)
- Blaze Extendable Vent Hood Duct Covers installation guide (PDF)
- Blaze 48-inch outdoor vent hood manual, BLZ-48-VHOOD2 (PDF)
- Blaze product catalog, January 2026 (PDF, vent hoods page 35)
- Blaze product registration
Legal disclaimers and warnings
Product packaging, owners' manuals, installation instructions, and/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product. WARNING: This product can expose you to chemicals including chromium (hexavalent compounds), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
