

















Features
- 42,000 BTU: three 304 stainless steel tube burners at 14,000 BTU each, each on its own knob.
- 558 sq. in. of cooking area: a 22-3/8" x 18" grid of 8 mm rounded stainless rods plus a warming rack.
- Zone cooking: removable heat zone separators divide the grid into individual temperature zones.
- Fewer flare-ups, easy cleanup: perforated flame-stabilizing grids over the burners and a full-width roll-out drip tray.
- Reliable lighting: Push N' Turn flame-thrower ignition with a flash tube backup and a lighting tube for match lighting.
- Heat-holding hood: double-lined 304 stainless steel with a hood thermometer.
Specifications
| Status | No longer available; replaced by the Blaze BCM 25 (BLZ-3BCM) |
|---|---|
| Brand | Blaze |
| Series | Prelude LBM |
| Model | BLZ-3LBM-LP (propane) / BLZ-3LBM-NG (natural gas) |
| Type | 25-inch built-in gas grill |
| Overall dimensions | 25" W x 25-3/4" D x 21-1/4" H |
| Cut-out | 23-1/4" W x 21-1/4" D x 8-1/2" H (plus space behind for the hood to open; see the manual) |
| Main burners | 3 commercial-quality 304 stainless steel tube burners, 14,000 BTU each |
| Total output | 42,000 BTU |
| Rear burner | None |
| Cooking grid | 22-3/8" x 18" |
| Total cooking area | 558 sq. in., including the warming rack |
| Cooking grates | 8 mm rounded stainless steel rods |
| Flame control | Perforated flame-stabilizing grids; removable heat zone separators and lower heat baffles; full-width roll-out drip tray |
| Ignition | Push N' Turn flame-thrower; flash tube backup; lighting tube for manual lighting |
| Hood | Double-lined 304 stainless steel, with thermometer |
| Construction | 304 stainless steel |
| Gas pressure | Natural gas 4" water column; propane 11" water column |
| Clearances | 14" from combustibles at the sides, 16" at the back; 5" behind for the lid; 6 ft to overhead construction |
| Insulated jacket | BLZ-3-IJ, required in a combustible island |
| Warranty | Lifetime on burners, cooking grids, body, flame tamers, heat zone separators and valves; 1 year on ignition, electronics and lighting; 3-year multi-user coverage |
What's included
- 25-inch built-in grill head with double-lined hood and 3 tube burners
- Rod cooking grids and warming rack
- Flame-stabilizing grids, heat zone separators and lower heat baffles
- Full-width drip tray
- Regulator and hose for the fuel ordered, plus an orifice kit for the other gas type
Blaze does not publish part numbers for these items.
Sold separately
- Insulated jacket for the 25-inch 3-burner LBM (BLZ-3-IJ), required in a combustible island
- Built-in grill cover for Prelude LBM 3-burner grills (3BICV)
- Wind guard for 25-inch 3-burner gas grills (BLZ-WG-25)
- Stainless steel island vent panel (BLZ-ISLAND-VENT)
- Roll-out propane tank drawer (BLZ-TRLP-DRW-H), an alternative to a plenum wall for a tank inside the island
- 20 lb propane cylinder (propane models)
Installation planning
- Cut-out: 23-1/4" W x 21-1/4" D x 8-1/2" H; the 8-1/2" height leaves the air gap the grill needs underneath. The manual shows the extra space needed behind the grill for the hood to open. With the insulated jacket (BLZ-3-IJ), frame the opening to the jacket's 25-9/16" W x 22-1/4" D x 9-1/8" H cut-out instead.
- Install in a non-combustible island. If the island is built from combustible material, the insulated jacket is required.
- Clearances to combustible construction: 14" at the sides and 16" at the back; the 5" needed behind the grill for the lid does not replace the 16" back clearance. Keep at least 6 feet between the countertop and any overhead construction; under combustible overhead construction a vent hood must protect it.
- Island venting: propane settles low, so place vents low; natural gas rises, so place vents high. A propane cylinder inside the island needs a plenum wall, or use Blaze's propane tank drawer. Local codes and a licensed professional set the final ventilation.
- Propane: one standard 20 lb cylinder at most (12-1/4" diameter x 18" high) with a QCC-1 valve and overfill prevention device, stored upright and outdoors, never indoors. Connect the 3/8" flare fitting with a 3/4" wrench. Natural gas: a flex connector of at least 1/2" diameter; the supplied regulator is set to 4" water column. The installer supplies an accessible gas shut-off valve.
- Have two people set the grill head into the island to avoid damaging the unit or the countertop. All gas connections must be made by a qualified installer; incorrect installation voids the warranty. Fuel conversion is for a licensed gas professional only: remove the cotter pins and burners, change the brass orifices with a 6 mm socket without overtightening, then adjust the air shutters until the flames are mostly blue.
- Leak-test every joint with a 1:1 soap and water solution before first use and after any connection or service; bubbles or a gas smell mean a leak. Never use a flame.
First use and care: Before the first cook, run the main burners on HIGH with the hood down for about 10 minutes to burn off manufacturing residue; preheat on HIGH for about 15 minutes before grilling. Flames should be mostly blue and not lifting off the burner: open the air shutter if they burn yellow, and close it slightly if they lift. Let the grill cool completely before cleaning. Clean the drip tray after each use in hot soapy water. To clean the grates, flame tamers and heat separators, run the burners on HIGH for 10 to 15 minutes with the hood closed, then brush with a stainless steel bristle brush. To clean the burners, remove the cotter pins and burners, brush the outside, clear the ports with a small rod or pipe cleaner, and check for spider and insect nests before each use. Polish the exterior along the grain of the stainless steel with a stainless cleaner, avoid harsh abrasives, and let it dry before covering.
Warranty
Residential use: Blaze lifetime warranty on the main burners, cooking grids, stainless housing, flame tamers and heat zone separators, and valves; 1 year on ignition, electronics and lighting systems. Coverage is parts only: labor, shipping and handling are not covered. Multi-user settings (for example apartment complexes, hotels, condos, fire stations and police stations): 3 years on the stainless housing, burners, rod cooking grids, brass valves, inner liners and manifolds, and 90 days on all other components; this replaces the residential lifetime warranty, and restaurant use is not covered. The manual states the grill is not intended for commercial use.
Register the grill with Blaze within 30 days of purchase and keep the original receipt. Installation by a qualified installer is required, and incorrect installation voids the warranty. Discoloration, surface rust and rust are not covered unless there is structural loss or rust-through. Full terms are in the Prelude LBM use and care guide below.
Manuals and documents
- Blaze Prelude LBM use and care guide, BLZ-3LBM / BLZ-4LBM (PDF)
- Blaze product page: Insulated Jackets for Gas Grills
- Successor: Blaze product page, BCM 25-Inch 3-Burner Gas Grill
- Successor: Blaze BCM grill manual, BLZ-3BCM / BLZ-4BCM (PDF)
- Successor: BLZ-3BCM specification sheet (PDF)
Legal disclaimers and warnings
Product packaging, owners' manuals, installation instructions, and/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product. WARNING: This product can expose you to chemicals including chromium (hexavalent compounds), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.