Skip to product information
1 of 2

Blaze

Blaze Propane Low Pressure Hose & Regulator With Connector - BLZ-LP-HOSE/REG

Blaze Propane Low Pressure Hose & Regulator With Connector - BLZ-LP-HOSE/REG

Regular price $19.00
Regular price Sale price $19.00
Sale Sold out
$29.99 flat-rate shipping Within the contiguous US · Free shipping on orders over $199.99 before tax
Quantity

Order before noon Pacific Time for same-day shipping.*

Estimated delivery within the contiguous US: 2–3 business days after shipping.

*Monday–Friday, excluding holidays.

Shipping details

Orders placed before 12:00 p.m. Pacific Time Monday–Friday ship the same day, excluding holidays. Orders placed after the cutoff, on weekends, or on holidays ship the next business day.

Delivery within the contiguous US typically takes 2–3 business days after shipping. Saturdays, Sundays, and holidays do not count toward this estimate.

Orders with a subtotal over $199.99 before tax qualify for free base shipping to US destinations. Orders with a subtotal of $199.99 or less before tax have a $29.99 base shipping charge per order.

Additional shipping charges may apply to Alaska, Hawaii, and US territories. We will notify you of any additional charge on a case-by-case basis before shipping. See our shipping policy for details and delivery estimates for these destinations.

View our shipping policy

Ask an Expert

Buy with confidence. Talk to a grill expert today.

Hours

Sales & Support Hours (Pacific)

Sales
Mon–Fri 7am–9pm · Sat 8:30am–5pm · Sun 9:30am–6pm
Support
Mon–Fri 8am–5pm · Sat 8:30am–5pm · Sun 9:30am–6pm

Description

The Blaze BLZ-LP-HOSE/REG is Blaze's propane (LP) hose and regulator assembly with connector: the factory part that runs gas from a 20 lb propane cylinder to a Blaze LP grill. Blaze lists it by this part number in the parts lists of its BCM gas grill manual, for the Blaze BCM 25-inch 3-burner grill (BLZ-3BCM) and the Blaze BCM 32-inch 4-burner grill (BLZ-4BCM).

Use it to replace a hose and regulator that is cut, worn, abraded or leaking. Blaze says only the factory-supplied hose and regulator may be used on its LP appliances, without alteration, and that LP appliances must run on an LP regulator set to 11" water column. The grill end is a 3/8" flare fitting; the regulator end connects to the cylinder by hand.

Plan before you order: this assembly is for a portable 20 lb propane cylinder. A natural gas or plumbed-in (bulk) propane supply uses a different setup, such as the Blaze 10 ft natural gas / bulk propane hose (BLZ-NG-HOSE). Blaze does not publish the hose length. If your Blaze appliance is not a BCM grill, send us its model number so we can confirm the part before you order.

View full details

Features

  • Factory Blaze part: the hose and regulator assembly Blaze lists in its BCM grill parts lists.
  • For 20 lb propane cylinders: Blaze's BCM grills are certified for a standard 20 lb cylinder with an overfill prevention device.
  • 3/8" flare connection at the grill: tightens with a 3/8" open-end wrench, with no pipe sealant on the flare.
  • Hand-tight cylinder connection: no tools on the cylinder side, so changing tanks is quick.
  • Restores a safe supply line: replace the assembly when inspection finds cuts, wear, abrasion or leaks.

Specifications

Brand Blaze
Model BLZ-LP-HOSE/REG
Type LP hose and regulator assembly with connector (replacement part)
Fuel Propane (LP) from a portable cylinder
Listed for Blaze BCM gas grills BLZ-3BCM-LP and BLZ-4BCM-LP (BCM Series manual parts lists)
Cylinder Standard 20 lb LP cylinder, 12 1/4" diameter x 18" high, right-hand connection threads, overfill prevention device (OPD) required
Grill connection 3/8" flare, wrench-tightened, no pipe sealant
Cylinder connection Hand-tightened (Blaze BCM manual references CGA 791)
LP pressure Blaze requires an LP regulator set to 11" W.C. on LP appliances
Hose length Not published by Blaze

What's included

  • LP hose and regulator assembly with connector (BLZ-LP-HOSE/REG)

The propane cylinder is not included.

Sold separately

Installation planning

  • Fitting (Blaze BCM manual): slide the grill halfway into its cart or built-in opening, then connect the 3/8" flare end of the hose to the grill's coupling with a 3/8" open-end wrench. Do not put pipe sealant on the flare connection.
  • Connect the regulator to the cylinder by hand, without a wrench, then leak-test every joint.
  • Leak test before each use and whenever the cylinder or any gas part is connected or replaced: brush a mix of one part liquid soap to one part water on all joints and open the cylinder valve one turn. Bubbles mean a leak. Never test with a flame. If a leak cannot be stopped, shut off the gas, remove the cylinder and call a service technician.
  • Changing cylinders: turn the burner knobs off, close the cylinder valve, disconnect the regulator, connect the new cylinder and leak-test again.
  • Route the hose away from hot surfaces and sharp edges and do not twist it. Inspect it before each use for cuts, wear, abrasion and leaks; Blaze says to replace it only with the Blaze-specified assembly (or a UL, ETL or CSA listed part with an internally threaded connector, per its maintenance checklist).
  • Never connect the grill to an unregulated gas supply; Blaze says this voids the warranty. Do not use the natural gas regulator with a 20 lb cylinder. Regulator conversions must be done by a licensed gas professional.
  • Cylinders: do not use a dented, expired or rusted cylinder; check the cylinder's seal before every use. Store and transport cylinders upright with the valve off, outdoors, out of children's reach, and never store a spare cylinder near the grill or more than one in a base cabinet.

Warranty

Blaze does not publish a separate warranty term for this replacement part. Ask us before ordering if you need the coverage confirmed.

Manuals and documents