• Broilmaster Insulated Sleeve for 32-in Grill (BSASL32), sleeve
1 1

Broilmaster

Broilmaster Insulated Sleeve for 32-in Grill - BSASL32

Broilmaster Insulated Sleeve for 32-in Grill - BSASL32

$459.00
$599.00 $459.00
Sale Sold out
Free shipping Within the contiguous US

Order before noon Pacific Time for same-day shipping.*

Estimated delivery within the contiguous US: 2–3 business days after shipping.

*Monday–Friday, excluding holidays.

Shipping details

Orders placed before 12:00 p.m. Pacific Time Monday–Friday ship the same day, excluding holidays. Orders placed after the cutoff, on weekends, or on holidays ship the next business day.

Delivery within the contiguous US typically takes 2–3 business days after shipping. Saturdays, Sundays, and holidays do not count toward this estimate.

Orders with a subtotal over $199.99 before tax qualify for free base shipping to US destinations. Orders with a subtotal of $199.99 or less before tax have a $29.99 base shipping charge per order.

Additional shipping charges may apply to Alaska, Hawaii, and US territories. We will notify you of any additional charge on a case-by-case basis before shipping. See our shipping policy for details and delivery estimates for these destinations.

View our shipping policy

Ask an Expert

Buy with confidence. Talk to a grill expert today.

Hours

Sales & Support Hours (Pacific)

Sales
Mon–Fri 7am–9pm · Sat 8:30am–5pm · Sun 9:30am–6pm
Support
Mon–Fri 8am–5pm · Sat 8:30am–5pm · Sun 9:30am–6pm

Description

The Broilmaster 32-Inch Insulated Sleeve (BSASL32) is the stainless steel built-in sleeve for the Broilmaster B-Series 32-inch gas grill heads, the BSB324 and the marine-grade BSB324MG. It ships as a kit of four panels that you screw together, set into the island opening, and then lift the grill into; Broilmaster says the stainless sleeve keeps the areas around the grill head from overheating.

Broilmaster's B-Series manual (BR0387) lists the BSASL32 as the 32" insulated sleeve for the BSB324(MG) and calls it an optional accessory. The B-Series dimension sheet gives the sleeve as 32" wide x 8-3/8" high x 21" deep, and the manual gives a separate cut-out for installs with the sleeve (A 33-3/4", B 21-1/4", C 8-7/8", D 3-1/4", E 3-5/8", F 35", shown on its page 14 drawing), larger than the grill-only cut-out of 31" wide x 20-1/2" deep x 8-1/2" high. Our matching grills: Broilmaster B-Series 32-inch built-in gas grill (BSB324) and B-Series 32-inch marine grade grill (BSB324MG).

Plan ahead: the BR0387 manual tells you never to install the grill in a combustible enclosure and to build the island from non-combustible material such as brick or Hardibacker. Broilmaster's sleeve page describes its stainless sleeve for installation into combustible materials; until Broilmaster confirms how the two fit together, plan a non-combustible island and have your installer check it against the manual before building. For the 40-inch B-Series head (BSB405), see the 40-inch BSASL40 sleeve.

View full details

Features

  • Made for the BSB324 and BSB324MG: Broilmaster's B-Series manual lists the BSASL32 as the 32" sleeve for these grill heads.
  • Keeps the surround cooler: Broilmaster says its stainless sleeve prevents the areas surrounding the grill head from overheating.
  • Four-panel kit: left, right, bottom and back panels with 18 M5x12 screws, assembled with a Phillips screwdriver.
  • Its own cut-out: the BR0387 manual gives a dedicated cut-out for the sleeve, so you can frame the island to the right opening before the grill arrives.
  • Lifetime rust-through coverage: built-in sleeves are on Broilmaster's limited lifetime warranty list.

Specifications

Brand Broilmaster
Series B-Series stainless
Model BSASL32
Type Insulated built-in grill sleeve, assembly kit
Fits Broilmaster B-Series BSB324 and BSB324MG 32-inch built-in gas grill heads
Sleeve size (W x H x D) 32" x 8-3/8" x 21" (dimension sheet 010119)
Cut-out with sleeve (manual BR0387 p.14) A 33-3/4", B 21-1/4", C 8-7/8", D 3-1/4", E 3-5/8", F 35"
Grill cut-out without sleeve 31" W x 20-1/2" D x 8-1/2" H (manual BR0387)
Panels Left BR0263, right BR0264, bottom BR0265, back BR0267
Hardware 18 M5x12 screws
Tools Phillips screwdriver; leather work gloves recommended
Material Stainless steel
Gas and electrical access 4" square hole at the rear or bottom; connections are on the right side (manual BR0387)
Installation Built into an outdoor kitchen island of non-combustible construction
Warranty Limited lifetime against rust-through on built-in sleeves

What's included

  • Left panel (BR0263)
  • Right panel (BR0264)
  • Bottom panel (BR0265)
  • Back panel (BR0267)
  • 18 M5x12 screws

Sold separately

Installation planning

  • Build the island opening to the insulated sleeve cut-out on page 14 of the BR0387 manual, not the grill-only cut-out, and plan the frame for the combined weight of the sleeve, the grill and the finishing materials.
  • Assemble the kit (BR0419): screw the left and right panels to the bottom panel with 3 screws each, then attach the back panel with 7 screws (2 per side, 3 on the bottom). Remove the protective film carefully so the stainless does not scratch, and wear leather gloves: parts may have sharp edges.
  • Frame the opening level front to back and side to side and set the sleeve in it. No part of the enclosure may stick up above the top surface or in front of the liner face.
  • Lift the grill into the sleeve, slide it back so it rests over the sleeve lip on the back and sides, and follow the BR0419 kit instructions and the BR0387 manual for securing it.
  • Any gap between the sleeve and the non-combustible enclosure may be filled with a non-combustible sealant. Never place the transformer or run the gas hose between the grill and the inside of the sleeve.
  • Cut a 4" square hole at the rear or bottom for gas and electrical; the connections are on the right side.
  • When an LP tank is used in the enclosure, vent registers are required: at least 10 sq in each, 2 per side (1 high, 1 low), bottom of the vent at least 2-1/4" above the ground. The manual lists the BRB-1 vent register kit (two registers).
  • Leave 5" behind the hood so it can open, and see the BR0387 manual and the grill's rating plate for clearances to combustible construction.
  • Broilmaster's warranty calls for installation by a qualified installer.

Warranty

Broilmaster's B-Series dimension sheet lists built-in sleeves among the components with a limited lifetime warranty against rust-through, alongside the stainless grill housing, cooking grids, carts, side burners, access doors and drawers and vent register kits. Valves, knobs, ignitors, labels, hoses, fittings and all other parts and accessories have a 1-year warranty against rust-through, including those made from stainless steel. Broilmaster requires installation by a qualified installer and proof of purchase (bill of sale, cancelled check or payment record). Damage from misuse, improper installation or storage, or lack of maintenance is excluded, as are travel, diagnostic, freight, removal and reinstallation costs, service-call and labor charges. Claims go through your installing dealer with the model number and proof of purchase. Full terms are on Broilmaster's warranty page and in the BR0387 owner's manual.

Manuals and documents

Product packaging, owners' manuals, installation instructions, and/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product.