


Features
- Fits Bull's 30" gas heads and griddle: Outlaw, Lonestar Select, Angus and the 30" griddle bolt onto the same cart.
- Propane tank cabinet: holds one 20 lb cylinder upright, secured by a retainer knob and tank retention bolt.
- Two side shelves: right and left, with handles, for 59" of total width with the head fitted.
- Four locking swivel casters: roll the grill into place, then lock it before cooking or cleaning.
- Transformer mount: a plate inside the cart for the lighting transformer on lighted heads.
- Tools included: M5 and M8 Allen wrenches and all assembly hardware.
Specifications
| Brand | Bull Outdoor Products |
|---|---|
| Model | 45551, 30" pedestal cart bottom |
| Type | Grill cart bottom (pedestal base) |
| Fits | Bull 30" gas grill heads (Outlaw, Lonestar Select, Angus) and the Bull 30" griddle |
| Width assembled | 59" with the head and both side shelves (Bull spec sheet v2022.12.21) |
| Doors | Right (45553) and left (45554) panels, 2 handles (16619), 2 magnets (16694) |
| Side shelves | Right (69202) and left (69203), 2 handles (45520) |
| Casters | 4 swivel, locking (16514) |
| Propane cylinder | One 20 lb maximum, 12" diameter x 18" tall, with collar and Type 1 valve (not included) |
| Tank retention | Retainer knob and tank retention bolt (75321) |
| Assembly torque | Grill head and shelf screws 4.35 ft-lb (5 Nm) |
| Clearance to combustibles | 21" at the sides and back; outdoors only |
| Warranty | 1 year (cart parts) |
What's included
- Pedestal cart body
- Right door panel (45553) and left door panel (45554)
- 2 door handles (16619) and 2 door magnets (16694)
- Right side shelf (69202) and left side shelf (69203), with 2 shelf handles (45520)
- 4 swivel casters (16514)
- Tank retention bolt (75321)
- Hardware: 12 M5 x 12 mm button head screws with 12 oversized washers; 16 M8 x 20 mm pan head screws with 16 lock washers and 16 flat washers; 4 M6 x 25 mm Phillips screws with 4 oversized washers
- M5 and M8 Allen wrenches
Not included: grill head, propane cylinder.
Installation planning
- Outdoor use only: never in a garage, porch, breezeway, shed or other enclosed area, and never under overhead combustible construction. Keep at least 21" between the back and sides of the grill and any combustible surface.
- Casters: lock them, lay cardboard on a flat surface and turn the cart body upside down (remove the floor panel lid first if you will use a propane tank). Fit each caster to its corner plate with the M8 screws, lock washers and flat washers, start them finger-tight, then tighten with the M8 Allen wrench. Set the cart upright and lock the casters.
- Lighted heads: fasten the transformer to the mounting plate inside the cart (its screws come pre-assembled). Fit the door handles with the M6 screws.
- Grill head: remove the warming rack, grease tray, grates, flame tamers and any rotisserie parts to lighten it, and tuck the light cord inside. At least two people lift it onto the cart's alignment pins; never lift it alone. Secure it with four M5 screws and washers, and plug the light cord into the transformer.
- Side shelves: fasten each to the grill with M5 screws and washers (8 in total), notches toward the front. Tighten the head and shelf screws to 4.35 ft-lb (5 Nm). Never use the shelves to lift the grill.
- Propane: use one cylinder no larger than 20 lb, 12" in diameter and 18" tall, with a valve collar and a Type 1 valve, filled to no more than 80%. Stand it upright with the valve facing right, turn the retainer knob back to clear the opening, then tighten it until it presses lightly on the tank. Connect the 31" hose and regulator (16589) supplied with propane heads, without alteration. Never store a spare cylinder under or near the grill, and never remove the pantry shelf to fit a second tank.
- Lock the casters before assembly, lifting and cleaning, and before you light the grill.
Care: let the grill and cart cool, then wipe the cart with a stainless steel cleaner. Clean it regularly: chlorine, bromine and some fertilizers attack stainless steel. Inspect and clean the burners before first use and often after that, since spider webs and debris can block the gas flow.
Warranty
Bull covers all parts of its components, including grill carts, for 1 year (Bull warranty policy v2026.10.29). The limited warranty covers defects in materials and workmanship for the original purchaser at the original site of delivery or installation. It does not transfer to a later owner and does not cover rental, commercial or other non-residential use. Bull replaces the defective part or product free of charge, at its discretion, but does not pay shipping, labor or accessories. Damage from transport, storage, improper installation or use, the wrong gas supply, skipped maintenance, modifications, normal wear, rust, corrosion, oxidation or discoloration is not covered.
The cart manual asks you to register within 90 days of purchase, online at bullbbq.com or by mail with proof of purchase, and to keep the model number, serial number, purchase date and receipt. Claims go to Bull customer service at (800) 521-2855 (Monday to Friday, 8am to 5pm Eastern) or bullbbq.com/support.
Manuals and documents
- 30" pedestal cart bottom owner's manual, 45551, V2022.5.11 (PDF)
- 30" pedestal cart spec sheet, 45551, v2022.12.21 (PDF)
- Bull warranty policy, v2026.10.29 (PDF)
- Bull 30" Outlaw Complete Cart product page
Legal disclaimers and warnings
Product packaging, owners' manuals, installation instructions, and/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product. WARNING for California residents: this product may contain chemical(s) known to the state of California to cause birth defects, cancer, or other reproductive harm.