Bull
Bull Steer Premium 25-Inch 3-Burner Built-In Grill - 6900
Bull Steer Premium 25-Inch 3-Burner Built-In Grill - 6900
Couldn't load pickup availability
Order before noon Pacific Time for same-day shipping.*
Estimated delivery within the contiguous US: 2–3 business days after shipping.
*Monday–Friday, excluding holidays.
Shipping details
Orders placed before 12:00 p.m. Pacific Time Monday–Friday ship the same day, excluding holidays. Orders placed after the cutoff, on weekends, or on holidays ship the next business day.
Delivery within the contiguous US typically takes 2–3 business days after shipping. Saturdays, Sundays, and holidays do not count toward this estimate.
Orders with a subtotal over $199.99 before tax qualify for free base shipping to US destinations. Orders with a subtotal of $199.99 or less before tax have a $29.99 base shipping charge per order.
Additional shipping charges may apply to Alaska, Hawaii, and US territories. We will notify you of any additional charge on a case-by-case basis before shipping. See our shipping policy for details and delivery estimates for these destinations.
Description
The Bull Steer is Bull's compact 24-inch built-in gas grill: three welded 304 stainless steel burners at 15,000 BTU each, 45,000 BTU in total, with 429 sq. in. of primary cooking space on solid stainless steel grates.
A single-piece, dual-lined hood, a heavy-duty thermometer and piezo igniters with zinc knobs match Bull's larger grills. It suits a short island or a small patio. Choose natural gas or propane above.
Under it, the 25" double doors with reveal fit the Steer island. To use it freestanding, set it on the Steer pedestal cart.
Plan ahead: decide the fuel before the island is built. Propane needs its own vented, closed-off tank compartment; natural gas needs a line with a shut-off valve run by a licensed gas fitter. Bull requires a UL 710 listed vent hood if anything combustible is overhead.
Features
- 45,000 BTU: three welded stainless steel burners, 15,000 BTU each.
- 429 sq. in. primary cooking space: on solid stainless steel grates, plus a warming rack.
- Dual-lined hood: single-piece, with a heavy-duty thermometer.
- Piezo ignition: with zinc control knobs.
- Commercial certification: NSF/ANSI 4 and CSA.
Specifications
| Brand | Bull Outdoor Products |
|---|---|
| Model | 69009 (natural gas) / 69008 (propane) |
| Overall size | 26-1/2" W x 25-1/8" D x 21-1/4" H |
| Cut-out | 25-5/8" W x 21" D x 9-1/2" H |
| Main burners | 3 welded stainless steel, 15,000 BTU each |
| Total output | 45,000 BTU |
| Cooking surface | 429 sq. in. primary |
| Grates | Solid stainless steel |
| Hood | Single-piece, dual-lined |
| Ignition | Piezo, zinc knobs |
| Construction | 304 stainless steel |
| Weight | 106 lb |
| Fuel | Natural gas or propane (choose above) |
| Certification | CSA; NSF/ANSI 4 commercial |
| Propane connection | 31" regulator hose (16589) set to 11" water column, 3/8" flare union; uses a 20 lb tank (not included) |
| Natural gas connection | Regulator set to 4" water column, with two 3/8" NPT to 3/8" flare adapters |
| Clearance to combustibles | 21" at the sides and back |
| Lowest operating temperature | 0 degrees F |
What's included
- 24" built-in grill head
- Cooking grates and warming rack
- Grease tray
- Propane models: 31" regulator hose (16589)
- Natural gas models: regulator with two 3/8" NPT to 3/8" flare adapters
- Match holder (97022)
Installation planning
- Cut-out: 25-5/8" W x 21" D x 9-1/2" H. Overall size: 26-1/2" W x 25-1/8" D x 21-1/4" H.
- Build it into a non-combustible enclosure.
- Keep 21" between the sides and back of the appliance and any combustible material. Under an overhead combustible structure, a UL 710 listed vent hood must be installed and running while you cook.
- Propane models ship with a regulator hose set to 11" water column; natural gas models ship with a regulator set to 4" water column. Have a licensed gas fitter make the connection.
- Bull defines outdoors as: no roof and up to three walls; a roof and no more than two walls; or a roof and three walls with at least 30% of the perimeter permanently open. Never use it in a garage, porch, breezeway, shed or other enclosed area.
- Propane in an island: the tank compartment must be closed off from the grill, hold only one 20 lb tank, have its floor at least 2" above the ground, and have vents of at least 20 sq. in. within 5" of the top and 10 sq. in. within 1" of the floor (Bull recommends vents on every exposed side), plus a tank retention system such as Bull's retention system (16674). Bull's venting screen (44500) covers a vent opening.
- Natural gas: the installer supplies a 3/8" female flare flexible connector and a shut-off valve, to ANSI Z223.1/NFPA 54 in the US or CSA B149.1 in Canada (connectors to ANSI Z21.75/CSA 6.27). No Teflon tape on flare fittings, and disconnect the appliance during any gas-line pressure test above 1/2 psi.
- Leak-test every connection with a 1:1 soap and water solution at installation, at the start of each season and each time you change the tank.
- Before first use, remove the shipping cotter pins (one per burner) and check that each burner sits on its valve orifice.
- For a commercial installation under NSF/ANSI 4, seal the grill to the counter with NSF/ANSI 51 listed sealant.
Care: Inspect the burners at least once a month: spiders and insects nest in burner tubes and can cause a flashback fire. Healthy flames are blue, about 1/4" tall on low and 1-3/4" on high; the air shutter adjusts them. Wash the grates in mild soapy water, deep-clean the grill once a year, and never line the bottom with foil or sand. Disposable 24" liners (24267) keep the grease tray clean. Stainless steel is not rust-proof: wipe it down regularly near pools, salt air, fertilizer and lawn chemicals, and in hot, humid weather.
Warranty
Bull warranty periods for its current gas grills: lifetime on the insert assembly and cooking grates; 5 years on the welded stainless steel burners; 3 years on the manifold, handle end caps, flame tamers, heat shields and warming rack; 1 year on the lid, control panel, grease tray, bezels, knobs, temperature gauge, valves, regulator, flex tubes, rotisserie burner, transformer and lighting. Bull's limited warranty covers defects in materials and workmanship for the original purchaser at the original site of delivery or installation. It does not transfer to a later owner and does not cover rental, commercial or other non-residential use. Bull replaces the defective part or product free of charge, but does not pay shipping on replacement parts or labor. Damage from transport, storage, improper installation or use, the wrong gas supply, skipped maintenance, modifications, normal wear, rust, corrosion, oxidation or discoloration is not covered.
Register the product with Bull online (customer service portal) or with the mail-in card in the box, and keep your receipt: Bull asks for both when you make a warranty claim.
Manuals and documents
- Steer Spec Sheet (PDF)
- Steer manual (PDF)
- NSF Commercial Certification (PDF)
- Bull warranty policy (PDF)
Legal disclaimers and warnings
Product packaging, owners' manuals, installation instructions, and/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product. WARNING for California residents: this product may contain chemical(s) known to the state of California to cause birth defects, cancer, or other reproductive harm.